similar to: 2.05a firmware

Hello, I'm running * on a very basic configuration. I have a Wildcard TE405P with the first T1 connected to a PRI line and the remaining three to Adtran TA750 channel banks with FXS modules. I successfully configured everything to work with a couple of Swissvoice IP10S handsets (MGCP) and analog extensions connected to the channel banks. The problem I'm having is that when I pick up any

Thank you for all of the beta testing. New and improved graphics in this release along with drag and drop transfers and hold for all technologies. There's a screenshot on the link below. Also improved documentation so read the included README. There's also a sample xml configuration included. http://www.voip-info.org/tiki-index.php?page=Asterisk+WAMI Christian Hoffmeyer YottaDot

I am having a problem with Red Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different

I'm writing a program to quickly generate SIP<Mac>.cnf files for tftp configuration of the 79XX series of Cisco phones and would ask that anyone who is interested in using this please send me working examples of your SIP<Mac/Default>.cnf, and RINGLIST.dat files. Also, please send me your ring tones and * related logos for possible inclusion. Thanks, Christian Hoffmeyer YottaDot

Here's my situation. I have two receptionists that answer incoming lines. Each has a 7960G with 5 incoming lines each. I'm trying to set this up so each line on each phone doesn't utilize call waiting. My problem seems to be that ChanisAvail(Sip/cisco1&Sip/cisco2&Sip/cisco3&Sip/cisco4&Sip/cisco5) always returns cisco1. Here are the sip.conf entries: (mind you,

I am trying to setup the call manager and I configured the manager.conf file. When I try to telnet 0.0.0.0 5038 It says trying 0.0.0.0 >>>>> > Connected to localhost > Escape character is '^]'. > Asterisk Call Manager/1.0 > Then I type > Action:Login (enter) > Username:sam > Secret:sam > Then I enter twice > > I get Response: error

Hello all, My set up is a fractionated t1, with 1-6 voice channels, 21-24 data channels. I have a t100P installed in a amd 1500 with 512meg. Question: In order to set up the data channels, is the following correct? 1) compile new kernel with generic hdlc support 2) compile hdlc from hq.pm.waw.pl/hdlc 3) uncomment KFLAGS+=DConfig_ZAPATA_NET in zaptel makefile 4) compile zaptel, 5 compile rest

All, I am trying to configure hdlc support on T100P Digium card - everything seems ok... but it just does not work at all. I was able to compile all drivers, the light on the card becomes green when I plug T1 link.... but I even can't ping default router IP... there is no data coming back to me, so I am confused completely now. Also I tried both protocols - raw hdlc and cisco hdlc. The

Hi folks, in order to establish backward compatibility we made an image that automatically detects if the other side does not support RFC3264. Please try it out, we would be very interested if this image is a progress! http://snom.com/download/share/snom200-2.03b-SIP.bin Thanks, CS

Hi all! I updated my snom200 to 2.02t and now MOH from * don?t works anymore... only the MOH from snom server and if i clear the MOH server field in the phone i have no MOH at all..( with the transfer button, moh plays using a extension). Someone with that problem? I downgrade to 2.01s but nothing changes. Miklos -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I

> I've personally put up a $300 USD bounty on a win32 call manager - > hopefully a few others will help get the ball rolling : > http://bugs.digium.com/bug_view_page.php?bug_id=0000848 Is C# and .NET fine? This is already nearly done. I can send you binaries of a single user call manager, and the operator manager is in the pipe. Actually, I'll just post these for download.

Hi, The call waiting indicator do not work for me. I am using a snom200 cwi is switched on in phone-config. Have asked snom, but there are can not help me, because it is working for them. When it is coming in an call while the phone is busy. The phone returns: -- Got SIP response 486 "Busy Here" back from 190.100.200.19 But it should not, should make a "call waiting

Hello. I have two snom200 ip phones and 1 mp108fxs (audiocodes 8 fxs) and i dont get a ring in the caller phone when I dial from a snom200 to the other snom200 or the mp108fxs, I made a debug with ethereal, and I can see a "Ringing" packet being return from the called snom200 or mp108fxs to the asterisk box, but it is not being re-transmitted to the caller snom200. Altough

Alright, this may seem like something relatively easy to do but I must be missing something or had a neuron misfire. I am trying to get The Status lights on my Snom200 hardphones to display the status of each one of my PSTN lines in my Asterisk server. Current Config: 3 X100P cards Asterisk CVS-02/25/04-18:06:52 5 Snom200 phones I am currently using the following macro to dial out

I am using the snom 200 with Phone type snom200-SIP Version snom200-SIP 2.04g Bootloader URL http://www.snom.com/download/snom200-boot1.9.bin Firmware URL http://www.snom.com/download/share/snom200-2.04o-SIP.bin I am using asterisk stable tree. I had to disable "Challenge Response on Phone" on my snom; I could not get it to work with

Hello, Does anyone know how to conference a call on the SNOM 200 phone? Whenever I push the cnf/tran button it just hangs up on the active call. The manual says you have to push the cnf function key but it doesn't appear in the lcd on my phone. Thanks -Matt -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have more or less decided to do with the SNOM phones for the next stage of testing with Asterisk becasue they seem to be the best value for money and have support for the GSM codec and easy upgrades.. But now I have to decied wheather to get the 100 or 200 and if its the 200 then I need to have some justification for the extra cost.. Can someone who knows these 2 phones tell me what the

Check the Redirection on the web interface of your Snom 200. If it says "When Busy" that's your problem. It should say "Never". Also make sure on Sip->Lines your line appearance says "All" or else you will have the same problem. Hope this helps :) Greg Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/3efdeb9f/attachment.htm -------------- next part -------------- Hello Though my SNOM 200 phone receive a voice mail but it doesn't show MWI on the LCD panel, Instead it keeps displaying "DND SW-REG,Call-log". Though I can access my voicemail using exten