similar to: asterisk + NEC integration

Hi, I'm am currently in the process of trying to integrate an * box with an NEC Electra Elite IPK. Currently, we have 7 POTS lines coming into our building. These lines are plugged into our NEC using the appropriate analog line interface card from NEC. The NEC effectively has NO configuration done to it, other than to make all the internal phones ring when a call comes in. We also

After our department went to using *, I've had several inquiries about doing VoIP for my entire organization (Small county). We have ~10 locations with various links in between (Mostly p2p T1s, some Frame (1.544mbps commit), some ISDN, some VPN over 768kbit internet) Right now we're using several NEC Electra Elite systems, and 2 Nortel Meridian systems. In one of the main locations we have

Callerid issue 1) if you run ztmonitor on the fxo line & call in do you hear the fsk tone if yes then we beleive the CAC is passing fsk 2) in chan_zap->ss_thread around line 4154 (current cvs) if you get to the callerid_feed at least once then if you get to chan_zap->ss_thread->callerid_get around line 4163 (current cvs) does this parse fail

Hi, How can I make calls from Asterisk client to NEC NEAX 2400 traditional phone ? Is it possible to have a connection between Asterisk and NEC NEAX 2400, since NEC-NEAX2400 is an IP-PBX and supports SIP. Please help me to find a solution ;;; Thanks & Regards Ram Kumar Customer Support Engineer Barcode Gulf LLC Dubai , UAE Mobile : + 971 50 5594178 Email : Ramkumar@barcodegulf.net

hi * users, anyone out there ever come across, worked with or heard anything about NEC's Univerge SV7000 Telephony Server? Link is at http://www.univerge.nec.com/products/list/sv7000/sv7000.html I'm just wondering whether it's as flexible, programmable and configurable as Asterisk. It also looks like they've got a whole range of IP phones

I am trying to setup an extension in asterisk which dials an extension on the NEC DSX. i.e. If an asterisk user dials 402 I want it to connect to the NEC DSX @ 192.168.1.57 and connect to extension 402. ( 404 would be the NEC DSX sip account that I have the credentials for ). [402] deny=0.0.0.0/0.0.0.0 secret=pass1 dtmfmode=rfc2833 canreinvite=no context=from-internal host=dynamic type=friend

I am wondering if anyone could help me figure out how to turn down the volume on all the dial tones, indications, etc.. and especially the call-waiting CHIRP! I don't want to change the txgain and rxgain because they are working at levels that I would like. However, when voice conversations and voicemail recordings are at good levels then the dial tones, busy tones, etc are way too loud.

hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable and the Digium TE405P using E&M wink signaling. the connection's ok. however when dialing from the NEC to the Asterisk. most of the time the Asterisk only sees the first digit of the dialed number(which is 4 digits). some time if i dialed the 4 digits very fast it might get through. seems like there's a timming

I have done additional testing and I haven't been able to figure out why it's failing. Since my original testing we now set the realm on the authentication section to match what we receive from NEC. It's of the format abc at xyz.com I have verified the md5_cred several times and it matches the user:realm:password formula 3016:insiph at something0a646666.com:3016 where username is

*** Now you just need a "phone" or "station" (FXS) device and a method of connecting it. *** So... essentially I need to spend another $125 US on a Wildcard TDM400P so I can plug in an analog phone? On the X100P description it says: "The X100P supports FXS Loopstart and "Kewlstart" (Loopstart with far end disconnection supervision). It can detect ringing and

Hello Astrites, I was just about to send out a long email about not being able to detect hang-up with my CAC II FXO module on my PSTN POTS lines. I had tried many configurations. I had attached a toner to the line to see if I was getting this "disconnect supervision" signal after hang-up. (toner has a line powered light in the off position) It seemed that I was getting the signal,

Hello, I don't have any experience with channel banks and would appreciate any feedback on my theory outlined below: We have a single T1 entering the building with channels 1-12 being voice lines and 13-24 being a 768k internet connection. This T1 terminates to an Adit 600 (T1-1). Here's what I know. Channels 11-12 go out the Adit 600's 25-pair connector to a wiring block (and

Hi there. I bought a generic UPS from a local (South African) hardware company, Sahara. They call it an "Electra 1000 Plus". From what I am told it is a 1000 VA line interactive UPS. It comes with "WinPower" Java based software that I couldn't get to work. (Crashes on start-up, without any explanation.) I would like to know if any one on this mailing list could help me

Hello, we’d like to propose the integration of a new backend into LLVM: NEC SX-Aurora TSUBASA Vector Engine (VE). We hope to get some feedback here and at EuroLLVM about the path and proper procedure of merging. The SX-Aurora VE is a Vector CPU on an PCI-E Accelerator card. It has 48GB memory from six HBM2 stacks, accessible with 1.2TB/s bandwidth, 8 cores with vector and scalar units, each.

Hello, I am trying the setup the TDM01B card. 1 FXO. I connected it to a regular home line. in the /etc/zaptel.conf, I have fxsls=4 In the /etc/asterisk/zapata.conf I have: signaling=fxs_ls language=en group=1 context=default channel => 4 When I start asterisk, I get this error: ERROR[10376]: chan_zap.c:6584 mkintf; Signaling requested on channel 4 is FXO Loopstart but line is in FXS

Hi, I've tracked the first problem (mentioned in my previous email, quoted below) down further, ending up in the handling of alloca in LoopRotation.cpp (from trunk): // If the instruction's operands are invariant and it doesn't read or write // memory, then it is safe to hoist. Doing this doesn't change the order of // execution in the preheader, but does

2012/2/3 Patrik Hägglund <patrik.h.hagglund at ericsson.com>: > Hi, > > I've tracked the first problem (mentioned in my previous email, quoted > below) down further, ending up in the handling of alloca in > LoopRotation.cpp (from trunk): > >      // If the instruction's operands are invariant and it doesn't read > or write >      // memory, then it is

Hi, so I just bought a NEC 1300A, primarily, because it allows me to write DVD+ and -RW. Using DVD-R discs (and currently no options to try other media, due to shops being closed), I'm unable to write anything, using either the dvd+rwtools port, or the dvdrtools. I've exhausted all references to be found in google, which are in a language I understand, so I'm hoping the list can

Is anyone on the list using an Audiocodes gateway with asterisk and SIP? I'm looking at that platform, but I have a couple of issues: 1) Echo cancellation. The echo that I'm hearing with an X100P is unacceptable. Does the Audiocodes do better? 2) Line signalling. I'm using Kewlstart with the X100P, but it looks like the audiocodes uses loopstart only. How does this work with

Is there anyone out there who has tried to connect up an asterisk box to make and take calls through a NEC NEAX 2400 using Q.sig or anything like it? Can anyone tell me if it is possible? Thanks in advance, Phil Allred Brooklyn Law School