similar to: multi-user * installation

Hi, Does anyone know how to dial toll-free (800) numbers through FWD or Siphone? Using the configuration below, I can dial out to SIPphone.com users by simply dialing their number (1747XXXXXXX) and can dial out to FWD users by dialing 1383<FWD#> However, when I dial 18005551212 through SIPphone, or through FWD (depending upon which line is selected in "; 800 Toll Free Numbers"

Good day all, I switched my SIP FWD account to IAX and connect my * in IAX. Working great, but I face one problem: I have an iaxtel account and try to call from there (iaxcomm) my FWD Iax # by 17009xxxxxx. It's ringing but no termination on my *. Calling 17009999612 or 17009<SIP FWD#> is working (SIP FWD# being an normal SIP account on FWD). Has someone some idea on what's

I found this configuration file on Wiki for FWD behind firewall ; SIP Configuration for Asterisk ; [general] disallow=all allow=ulaw port=5060 ; Port to bind to bindaddr=0.0.0.0 ; Address to bind SIP channel to externip=xxx.xxx.xxx.xxx localnet=172.16.1.0 localmask=255.255.255.0 context=inbound-sip ; Default context for incoming calls maxexpirey=180 defaultexpirey=160 tos=reliability

I've tried to register * at FWD but * segfaults, so i guess my register-line in sip.conf isn't correct. It looks like: register => fwd#:pwd@192.246.69.223 should it be different? Chris

On Thu, 2004-01-15 at 19:18, dkwok@iware.com.au wrote: >> I do not have any zaptel hardware on the Asterisk box, I could not have >> meetme functioning. I did modify the Makefile in zaptel directory on >> line 168 by including ztdummy as one of the modules to compile in. try modprobe ztdummy This works. Should I include this in /etc/asterisk/modules.conf so that it will

Philipp von Klitzing wrote: > You'll need to provide the CODEC that you are using in X-Lite! > The codec used in Xlite is 711uLaw. I guess it is one of the preferred ones other than gsm. And it is of small size. -- David Kwok FWD#/IAXTEL# : 17001813482 ext 1002 -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type:

Subject: [Asterisk-Users] meetme not working Reply-To: asterisk-users@lists.digium.com I am trying to set up meetme functionality but am unsuccessful so far. When I dial the extension, an announcement says, "That is not a valid conference number, please try again." In order for meetme to work you need either zaptel hardware OR you recompile the asterisk directory and include the

Greetings i have been using asterisk with good success with soft phones and I need to purchase some Sip capable phones to test. How would/do vendor specific phones like cisco 7900's and 3Com VCX 3100 series phones work SIP to SIP if they download the protocol from the Vendor call centers? I want to build my own with Asterisk, and use different phones. They say they are RFC 2543

I am forwarding my calls from my packet8 phone number to my Free World Dialup account using the Packet8 FWD interconnect codes. I have asterisk registered with my FWD account via IAX2 and have also tried with SIP. When a call comes in Asterisk interprets any DTMF tones twice. IE: someone types 1 asterisk thinks they pressed 11. I have tried the echo test and do not hear any keybounce or echo. I

I do not have any zaptel hardware on the Asterisk box, I could not have meetme functioning. I did modify the Makefile in zaptel directory on line 168 by including ztdummy as one of the modules to compile in. The error message from the concole: -- Executing MeetMe("SIP/1002-e9ca", "4700") in new stack == Parsing '/etc/asterisk/meetme.conf': Found

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call

10.000 lines of code changed, and suddenly Swfdec plays Youtube. Here's the release that makes it possible: swfdec-0.4.3 "Your tube" http://swfdec.freedesktop.org/download/swfdec/0.4/swfdec-0.4.3.tar.gz MD5: 7a857dcc9228ac590327b04a90db2e64 This release focused on supporting video features and scripting features. It's been a lot of under-the-hood changes. While it's

Tag '0.4.3' created by Benjamin Otte <otte@gnome.org> at 2007-03-22 20:29 -0700 release 0.4.3 ("Now this puny world will bow down to me!") -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQBGAtkfvMv5VCdLq8QRAm3vAKCic3DUAvDlt1C2+Pv5wJSdszSE3ACfctuD 5OM1kV/tKXw+U4ib3rIi/Fg= =bP7Y -----END PGP SIGNATURE----- Changes since 0.4.1: Benjamin Otte:

Not directly related to Asterisk but I'm sure one or two of you will get hot and bothered over this. :-) http://deancollinsblog.blogspot.com/2008/10/thecus-n7700.html Regards, Dean Collins Cognation Inc dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 New York +61-2-9016-5642 (Sydney in-dial). +44-20-3129-6001 (London in-dial).

Hi All, I've been playing with some new metadata tags for a while and I think I'm ready to share the joy. I've set up a puny webserver at http://phippo.is-a-geek.com/mixramp.html (please don't slashdot it) with some patches to implement and use the tags. The patch for metaflac applies to the current CVS FLAC and adds the command line option --add-mix-ramp. This is a

#### Way too many of my fellow boomers exemplify the old saying about being " born on third base and strutting because you think you hit a triple". Tim, KA4LFP#### #### Morse code, the original digital mode Real radios glow in the dark. SWAN rule number 1: Life is too short to have a puny signal. ? K0MHP SWAN rule number 2: No menu required. ? K0MHP ## -------------- next part

Hi list, I have this problem of (relatively) poor samba read performance. Read performance is constantly, reproducibly lower than write performance and I can't really understand why. Here is the server configuration : dual octocore Opteron 6128, 32 GB RAM Adaptec 6445 RAID card 36x 2TB Hitachi SATA drives (raid 60) Sustained local disk throughput: over 850 MB/s write, over 1.4 GB/s read.

The first error in CVS - fairly minor - is in the docs section: ---------------------------------------------------------------- make[1]: Entering directory `/tmp/temp/oggstuff/theora/doc' python txt2py.py spec.txt spec.py python txt2html.py spec.txt spec.html make[1]: *** No rule to make target `testspec.raw', needed by `all-am'. Stop.

Hi Folks, I'm contemplating using locator() to digitise external graphics. To set context, I would be using X11 display on Linux. To pre-empt the obvious comment: I've found on the R site the suggestion to use the 'pixmap' package. I've tried this, and it works; but it involves building a big R object (the internal pixmap representation), and this chokes my somewhat puny

Jim Bailey wrote: > were found the list seems to of quietened down a lot. Maybe the big > boys are busy working on a new version or prahaps the rumours are true > and they have gone to work on shoutcast. I am not sure where I picked > up the later if it not true please feel free to flame me. *flame* :) Courious, how rumors like this can come up. Icecast1 doesn't get much