similar to: Grandstream Budgetone G723, G729 or any compression

I have spent the morning on this project, still without success. Summary: Yesterday I inadvertently unplugged my Grandstream phone. I might add I did a rebuild of my s/w from CVS at the same time. Since then, the Budgetone seems to talk SIP just fine, but the RTP being sent to it by asterisk "doesn't make any sound." It was suggested I do a factory reset of the phone, which I

Folks! We have purchased G729 and have been testing the codec on mUltiple Gateways. Here is what we have found. Here is the config I have used: ------------------------------- Asterisk Server On Dual Pentium Xeons with 6GB of RAM, running on Fedora Core 2 User1 is in USA on Broadband Cable User2 is in India on 64Kbps ISDN Line User1 using SIPURA SPA 2000 user2 using Xten professsional(X-pro)

Somebody must have! Please, send me a g723 and/or g729 (for Asterisk) to pisac@hotmail.com (antispam subject: codec) Thanks, thanks, thanks... :-)

Hello, Anyone using the 1.0.4.55 firmware release with any success? I have had my Budgetone running 1.0.4.50 for about a month and a half now with no problems whatsoever, and I am a little leary about upgrading. -- Vice President of N2Net, a New Age Consulting Service, Inc. Company http://www.n2net.net Where everything clicks into place!

It gets definitely better every day. List of bug fixes follows: Release 1.0.5.9 7/26/2004 If SIPRegister doesn't proceed due to conditions unmet, release channel resource Fix the LED flashing issue when connection to the SIP proxy is lost. Fix the issue where the device will not resume registration when it loses connection to the outbound proxy for some time. Fixed the

hi everybody, I try to record a call with *1 - one touch record feature in g723 format. exten => _00[1-9].,1,Set(TOUCH_MONITOR_FORMAT=g723) exten => _00[1-9].,n,Dial(SIP/${EXTEN}@ext-sip-account,,wW) I have chosen g723 format because in my CLI> show translation there is no translation between g723 format and wav (default for *1 feature). After pressing *1 sequence I have two

Hi, I am calling from a grandstream phone with g723 codec through * to iconnect. Incoming context as well as outgoing context set to g723.1 codec in *. Call get connected and I can talk. However I get the following warning, which scrolls on my screen until I hang-up. [root@asterisk sath]# cat g723.1 - Executing SetCallerID("SIP/-08122ae0", "1001") in new stack --

Can anyone recommend a codec pack with G723 for use under Vista? I have G723 prompts (about 70 prompts totaling 1MB) needing to be converted to G711 uLaw. I tried Audacity but it doesn't have G723 codecs. I tired some google found adware free tools and websites with no success in converting G723. It does appear the old Cool Edit (now Adobe Audition 3.0 for $349USD) can do it -jason

I am setting up Asterisk for use in a low bandwidth environment. As bandwidth is precious and our ATA's support it, the decision was made to use the g723 codec. I have been working on this for a few days and have not been successful. The issue that I am having is garbled noise at the client on calls whose RTP streams are terminated by Asterisk system. This is the case for all the dialplan

Kai, Thank you for the reply. I didn't want to bother the list too much. However, after reading I discover I don?t have a clear cut way of doing transcoding. Can somebody direct me to where I can get document to get this transcoding done. My set up >From [cisco (g729)] ----> [asterisk (sip channel(g729)within the same asterisk) g711 to chan_ss7] -----> [pstn] And vice versa. I

All, Our users have a softphone client that supports the G723 Codec which we want to use for bandwidth reasons, however we do not wish (or have the funds) to license the codec on our Asterisk servers. We have G723 pass-through working between the clients just fine, however calls fail when terminating with Asterisk itself (i.e. Voicemail) or out to the PSTN due to transcoding issues. If it

FYI, asterisk DOES now support g723, but you have to pay for it: http://store.yahoo.com/asteriskpbx/asteriskg729.html -----Original Message----- From: Dan Fernandez <danfernandez00@hotmail.com> Date: Mon, 5 May 2003 17:33:05 -0300 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Has anyone gotten SIP_CODEC= to work? Basically, since I?d like to use g723 for sip

-This is my 'sip.conf' file: ;************************************************************* ; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls tos=184 maxexpirey=3600 ; Max length of incoming registration we allow

I am having some problems with g729 with SIP and ZAP channels. 1) I have two g729 licences. Very frequetnly (I don?t know what triggers the error) I get the following warnings and error when I try to place a call via SIP to my X100P. The only way to get out of this is through a restart of *. When the error ocurrs there are no other calls in place. Any ideas? Error Opening channel:2 not

Hi, I have softphone with a g723 codec, my question is how do i set it as Pass thru in Asterisk? cheers, Aby Azid -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080424/b442d5af/attachment.htm

Hello, all. I have some problem when testing my IP phone with Windows Messenger. My IP phone supports such codecs as g729, g711. And Windows Messenger supports red, g711, g723 as you know. The problem comes up when testing with this sip.conf file. ([general] context displayed only) =================================================================================== [general] port=5060

Hi Folks, Since there isn't a grandstream forum AFAIK I guess someone here may be able to shed some light on this. Apologies if this is viewed as offtopic.. I think I may have killed the firmware on my Grandstream Budgetone 101. I found a source for the 1.0.5.30 firmware and made the files available over tftp. The phone downloaded the files but now doesn't boot and hangs with a blank

It appears that there are no transcoders from g723 to anything else in Asterisk 10.7.1. Does anybody know how to fix that?

Thanks...which version of IPP did u use ? I do not have Makefile file....there is only a .sh script Thanks Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Juan Salas Inviato: luned? 3 ottobre 2005 15.41 A: 'Asterisk Users Mailing List - Non-Commercial Discussion' Oggetto: RE:

Hi: How to install and set up my asterisk server with G723 codec to send and receive calls using it. Thanks in advance; Wassim _________________________________________________________________ Explore the seven wonders of the world http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE