similar to: h323 and oh323 g711 to g729 please help

Hello list, I have many IP hardphone like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider I have this problem: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider ( G729 ) only if I disable

I have a connect to * via H.323/g711 from device A and want to connect to B which want for H.323/g729 h323.conf contains disallow=all allow=alaw allow=g729 but outgoing faststart/TCS contains only g711 (from h323_request(format) i think) and so no codec negotiation and no voice. Howto run up g711/H323 -> * -> g729/H323 PS intel's g729 was used. ast 1.0.3-6 PPS stupid -

Hi All, I have set up a box that will be used as follows: SIP Phone ----> Asterisk ----> Cisco H323 VoIP Server 192.168.1.5 192.168.1.50 192.168.1.80 Asterisk is running the latest CVS and oh323 driver. The SIP phone is a Grandstream Budgetone 100. I have everything setup and running with G.711 ALAW and ULAW and i'm able to make calls through

Hello everybody, my * box is connected to gnugk with H323 channel. If I call from an H323 EP to SIP EP (GS HandyTone or Xlite), when callee is picking up, audio start but noisy (scratch) , then became ok for callee (SIP EP) but still scratching on H323 EP. Now I stop/start asterisk, call from SIP to H323 EP and it's ok. And from now, it's also ok when H323 EP call SIP one's! No

Hi, Does anyone know if Asterisk is a good tool to be used for a large quantity of g711 and g729 transcoding? What is the best alternative for that? -- Woody Dickson woodydickson at gmail.com <woody.dickson at gmail.com> US and Worldwide Termination ============ Contact me for the following offering ============ USA Onnet - 0.0049/min USA Offnet - 0.011/min USA Mobile starting

Hello, all. I have some problem when testing my IP phone with Windows Messenger. My IP phone supports such codecs as g729, g711. And Windows Messenger supports red, g711, g723 as you know. The problem comes up when testing with this sip.conf file. ([general] context displayed only) =================================================================================== [general] port=5060

Hi, We have a scenario where inbound calls from an upstream provider (chan_sip) sent downstream (chan_iax2) negotiates only g729 yet RTP media contains g711. Both the upstream and downstream trunks are limited to only offering g729 whilst the initial invite from our upstream provider offers both g711 and g729. Asterisk presumably simply forwards the media from iax2 trunk encapsulation to sip

Hello, I'd like to use g729 pass-thru when I dial out to a sip provider from my IP phone but because I have no license for g729 I'd like to use g711 ulaw for asterisk voicemail, conference bridge and other services. When I set in [general] section of sip.conf the following: disalow=all allow=g729 allow=ulaw the g279 pass-thru works fine with my SIP provider but when I call the

Hi, I was able to use Unsniff to validate that the incoming 20 byte payloads of audio from the downstream IAX2 trunk was definitely G.729a whilst Asterisk 16.13.0 transcodes to G.711a unnecessarily. Media is confirmed as having been negotiated as g729 on all four streams. Nuance with this call is that it's from a WebRTC client which doesn't transmit any audio, could this be influencing

Hi, We have a scenario where inbound calls from an upstream provider (chan_sip) sent downstream (chan_iax2) negotiates only g729 yet RTP media contains g711. Both the upstream and downstream trunks are limited to only offering g729 whilst the initial invite from our upstream provider offers both g711 and g729. Asterisk presumably simply forwards the media from iax2 trunk encapsulation to sip

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

Abwesenheitsnotiz: [Asterisk-Users] oh323 geting voice problem g729 xeon 2.8 , fedora 1 , asterisk 1.0.6Hi All I am using oh323 with 6.6 virsion , and runing under xeon 2.8 dual with 2 gb ram, with g729 for i686 , (fedora 1). my problem is sip - oh323 - h323 (quintum) - pstn , sip party can listen otherparty realtime voice , but other party geting sip party's voice 1 sec later (not

Hello Michael, Here is the BackTrace of the program which i forgot to attach BACKTRACE OF Asterisk -vvc #0 0x42074d60 in _int_realloc () from /lib/tls/libc.so.6 #1 0x420738c4 in realloc () from /lib/tls/libc.so.6 #2 0x47c7da89 in PAbstractArray::SetSize(int) () from /home/sip/pwlib/lib/libpt_linux_x86_r.so.1.5 #3 0x47c7cf4d in PContainer::SetMinSize(int) () from

Anyone have a customer sending/receiving multi-page faxes over Verizon Business SIP trunk/g711 ? Verizon Business indicates they don't support it, and I have 2 recent customers that it doesn't work for, and 1 current large customer telling me he's going to make it work <grin>. The issues is the latency/jitter on fax/g711 over Verizon Business seems to spit out only 11

The scenario we have is fax send/recieve software that ONLY talks T38 and an asterisk box. We have ITSP providers that do NOT talk T38 but G711 only. Does asterisk have the capability to take the T38 call from an ATA or T38 software then bridge/transcode it and do G711 out to the PSTN providers? If not is there another product PAID or FREE software or hardware that can do this easily and

Hello All, Anyone here has experience of accepting a ilbc call and sending it on g711 or g729 I am having problem in VOICE , call goes though but there is no voice. Senario: Call is coming in from Machine A to Machine B, sending to Machine C Machine B is an asterisk box, transcoding it from IBLC to G711 and g729. Problem: Voice is not appearing on the sip user sitting on machine A Already

Hi, I was able to use Unsniff to validate that the incoming 20 byte payloads of audio from the downstream IAX2 trunk was definitely G.729a whilst Asterisk 16.13.0 transcodes to G.711a unnecessarily. Media is confirmed as having been negotiated as g729 on all four streams. Nuance with this call is that it's from a WebRTC client which doesn't transmit any audio, could this be influencing

I have multiple voiceage g729 licenses installed on a RH9 box, and have a remote C7960 configured to use it (low bandwidth). In calls like: Remote C7960 -> g729 -> asterisk -> g711 -> C7960 the audio is oftentimes rather choppy. Changing the remote 7960 to use g711 seems to eliminate/reduce the choppyness. Any ideas on what might be behind this?

Can anyone recommend a codec pack with G723 for use under Vista? I have G723 prompts (about 70 prompts totaling 1MB) needing to be converted to G711 uLaw. I tried Audacity but it doesn't have G723 codecs. I tired some google found adware free tools and websites with no success in converting G723. It does appear the old Cool Edit (now Adobe Audition 3.0 for $349USD) can do it -jason

Dears; I do not know if any had experience in using speex or ilbc with IAX and got good results, because I am facing a problem with GSM. I am facing a noise problem when I am using GSM with IAX trunk as following: IP Phone (G711) ---> Local Asterisk Box ---> IAX Trunk using GSM codec ---> Remote Asterisk Box ---> Digium Card (FXO) to terminate the call to the destination While no