similar to: Calls to Cisco PSTN gateway

In sip.conf, Allow=All stopping all sounds! When I comment out this command, everything is OK. I can Allow all codecs one by one, but Allow=All produce same consequences as Disallow=All. I have Asterisk 1.0.0. Is this a bug?

On Thu, 12 Jul 2018, Pete Biggs wrote: > The i915 driver is fairly rock solid - virtually all desktop machines > these days have on-board Intel video, it's the lowest common > denominator. And your chipset is not exactly cutting edge stuff. I bought it used. > Are there any errors in the logs - either kernel logs or X logs? I'm not seeing anything that seems very

> > > > Kernel driver in use: i915 > > Kernel modules: i915 > The i915 driver is fairly rock solid - virtually all desktop machines these days have on-board Intel video, it's the lowest common denominator. And your chipset is not exactly cutting edge stuff. Are there any errors in the logs - either kernel logs or X logs? For some reason you say you

Hi All, I have just installed Asterisk and am trying to connect it to a SIP account that I currently have with www.voiptalk.org but without any success. Although I know that voiptalk do provide asterisk accounts I don't want to convert the SIP account until am happy that it's gonna work for me. The asterisk box is currently behind a firewall and the following ports are being forwarded

Hello, Hope everyone is enjoying their holiday! We setup two asterisk servers (From CVS on Wednesday) and set up IAX between the two. Right now they both reside on a switch with a static 192.168.0.x IP address. The first Server is .5 and the second is .30. Our dialplan seems to be working, however on the console we get a flurry of NOTICE and WARNING messages. NOTICE[1116941120]: File

Greetings, I have a couple of questions and figured I would put them all in one message to not spam the list as much as possible. I have searched voip-info, google and the list archives for all of these questions. If I have missed the correct response, please accept my apologies. I have been stuck on these for a long time and I am really hoping that the other users out there will be able to

I have a Vonage acct that uses the Cisco ATA186. Currently, I have the ATA186 plugged into a SPA3000 to act as the FXO port. I installed a X100P card with the idea of replacing the SPA3000. Now, when I plug in the ATA186 into the X100P card and make a call into the system (from cell phone) and hangup when the IVR is playing, Asterisk is not detecting a hangup and keeps looping the IVR. If

Hello: I have problems sending dtmf signal to an ATA186 my configuration is: ATA186 --> asterisk --> ATA186 --> FXS to FXO Converter --> PSTN The ATA186 are set to send dtmf RFC2833, but it seems that the ATA186 can't generate dtmf so I can dial to a PSTN number. Is there a setting that can fix my problem, inband dtmf does not work because I'm using G729 codec Thanks

I dont have a cisco acount yet can some bady hel me with the ata18x-v2-16-030401a-1.zip file. thanks in advance Rodney Acosta Coya. Dpto. Tecnologia de la Informacion. racosta@moanickel.com.cu Tel:(53)(24) 62 611 -----Mensaje original----- De: Paul Rodan [mailto:asterisk@glitch.cc] Enviado el: Martes, 23 de Noviembre de 2004 11:24 a.m. Para: 'Asterisk Users Mailing List - Non-Commercial

Hi All, I'm looking at getting some Cisco VoIP hardware to play with in combination with a Asterisk server. I've heard that there is beta software available to do SIP on the 7905G. So, I'm thinking of either getting a 7905G or a ATA186. My dillema is, which one to buy? I can get both for about the same price, has anyone had any experience with using a 7905G with Asterisk? On

Hi, I'm away at a conference in Amsterdam. My home is in Cambridge in the UK. On a whim, I tossed an ATA186 and a phone into my bags before leaving home. I was able to plug my ATA186 into a LAN here at the conference and was connected to my home Asterisk in a few seconds. Total time from unzipping my bag to talking to home no more than 15 seconds. OK, so the kit could be more portable,

Is there anyway to turn off the call waiting beep in the grandstream and/or cisco ata186? I have a dial statement in my extensions.conf that rings 5 phones at the same time by combining them with the & in the dial statement. i.e.) exten => blah,blah,Dial(SIP/GS1&SIP/GS2&SIP/GS3&SIP/ata186a&SIP/ata186b,25,t) If one of those lines is being used, then the user gets a really

Hi, I'm having trouble getting caller*id to appear on my phone connected to an ATA186, and being called from Asterisk. Does anyone out there successfully see callerid on their ata186-connected phone? The "From:" header in the INVITE to the ATA seems to have the "right stuff" - eg From: "Study phone" <sip:6002@195.217.255.45:5062>;tag=as412db061 But

Hi, I saw your posting about the cisco ata186 I2 vs I1 and the simple vs complex impedance. I ordered a cisco ata186 i2 for use in Canada by mistake, didn't know that I needed the I1 version. Will the I2 version work in Canada with regular anlog phones, or will I need to change it. Thanks for your answer. Samy -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Hi I have a brand new ATA186 with the following firmware: Version: v2.15.ms ata186 (Build 020919a) I have been through the archives about how to configure it, but my colorful configuration web page does not have the same fields that people say I need to adjust. Even the examples on Cisco's web site don;t match. For example, I don't have the GtkOrProxy field, which is an important

Hello Everyone - Well, I think I'm getting closer with the asterisk connection. This is my setup and I keep getting this error below in ,my /var/log/asterisk/messages file. I have opened 5060 port on the firewall box. I would this is Warning which I can ignore! But I see the connetcion coming but NO DIAL TONE on mt ata186 box sitting in my 192.168.200.x site! I'm using ATA186(cisco

was wondering if someone could give any indication of the messages that are appearing on the console of an Asterisk PBX WARNING[1116941120]: chan_sip.c:532 retrans_pkt: Maximum retries exceeded on call ....@192.168.90.1 for seqno 103 (non-critical request) 192.168.90.1 is a 7940 ip phone configured as a SIP dial peer on asterisk pbx i mght added that the call seems to take place ok but this

I thought I'd post my experiences for the benefit of anyone else who may be at the point I was when I first started with asterisk. I have 2 incoming analog lines (north eastern U.S., Verizon) where one is set to ring if the first is busy. I bought a bare-bones system from abs-pc with the following components: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard)

I've installed Asterisk and configured an ATA-186 as described at this link: http://www.djernes.org/~shawn/ata186.htm Unfortunately this guide abruptly ends before it explains how to deal with the sip.conf and extensions.conf files. So I left extensions.conf alone and my sip.conf looks like this: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0