similar to: VoIP Phone Recommendations

I recently got a Pulver Innovations WiSIP wireless SIP phone to determine if we want to use them in our organization. Since the WiSIP phone arrived last week, I have had nothing but headaches. I do think I now have the problem narrowed down. I have spent a bulk of my time trying to get the WiSIP to work with a couple of Linksys WAP11 Version 2.2. I have met with no success in getting the WiSIP

Hello, I found serveral discussions about the Zyxel ePhone Prestige P2000W and the WiSip from Pulver Innovations on this mailings list but still have some questions: 1) are there other affordable wireless SIP Phones on the market? I haven't seen or found anything else till now ... 2) is p2000w and wisip the same hardware?? so could I use firmware from both companies regardless of what

I am having problems with * not hanging up an incoming PSTN line, if that line is not answered before the person calling in hangs up. The line hangs in various states, it has hung with a busy tone, with no tone at all. I am running *@home and have a digium 4port line card. This was configured by the genzaptel command I then added trunks for each line. I also have a Pulver WiSip phone which I

Hi Folks, I have an IAX trunk link to a collegues house. I'm using AAH and he's got the latest CVS as of last Tuesday. Problem we're having is this; when I dial his extension 7201 (Pulver WiSIP phone) his * box sends me 1 ring and then Alison's busy message. If I call his 7202 extension (X-Ten Pro on a Win2K laptop) I get through but with only 1 way audio (me to him). Until

Hello list, I was going to buy this weekend a Wisip from http://www.pulverinnovations.com/, but jeff got out of stock and he wont have Wisip for the next 3 to 4 weeks. So I start searching for other wifi phones because I was really upset about it and I found IPC5000 from http://www.fahdtel.com/sip_phones.htm, I liked so much the pic that I email the guy and he send me the PDF with all the details

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Anyone have any experience with either of these, I 'd appreciate some feedback? Plus it seems pretty easy to steal a connection with this. Zyxel Prestige 2000W WiSIP thanks, - -- Steve "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." Benjamin

All, I just had the fortune to take one of the new Senao Wifi SIP phones for a short test drive. First look - it's a nice, compact phone. Weighs around 87g and roughly the size of a Nokia 6210. More on the those later. The thing that struck me was the RF power, it's rated at 100mw (20dBm). That's 10 times more than any of the other brands out on the market Cisco, WiSIP, Zyxel

Folks, I'm looking for a SIP or IAX phone for field techs to take with them when out on service calls. The regular desktop phones are just way too big. Is there anything like the size of a full-sized cell phone? Or smaller, not I doubt that... Tim --

BroadVoice sells a wireless SIP phone for $149. Does this phone as sold by BroadVoice work with Asterisk or is it a locked down device like the Vonages ATA186? Adi

In that example you could make outgoing calls only correct? (since incoming likely needs port forwards) I guess the questions becomes "how often are you going to do that to justify the extra $100 or so you going to pay for a wifi sip phone?" Paul Fielding (paul.fielding@shaw.ca) wrote: > > I think some people are missing the point. You can't throw your cordless >

Greetings, I purchased a WiSIP at the VON conference and am now trying to configure it to work with Asterisk. I have read all of the previous postings regarding the WiSIP and most of the information apparently does not apply to the version of firmware installed on my phone (version WF.00.0F). I cannot get the WiSIP to register with my Asterisk box. It leases an IP from my DHCP server, then

http://www.pcphoneline.com/skype "The VPT1000 is NOT a simple last generation USB phone audio device but is rather a next generation integrated gateway and USB phoneset with simultaneous dual mode Skype and SIP calling support. Skype is not forecast to have "SkypeIn" available until June 2005 but you can have the capability now via its built in SIP capabilities." Is this a

Hello - Here's my first impression review of the first SIP 802.11 phone. I got my hands on the "first" one sold, so that perhaps makes me the first person to have a real 802.11 SIP phone commercially in the US interworking with Asterisk. Whee! Can someone point me to other commercially shipping phones to prove me wrong?

I am currently looking at putting together an Asterisk PBX system for my home office. One of the things I need is an expandable 2-line corded/cordless phone system. If I wasn't using Asterisk, I'd be getting one of these AT&T systems with 2 extra handsets. http://telephones.att.com/attui/shop/product_detail.cfm?itemID=ad53fe08-495e-41b6-b390-3aaa1c84cc40 So, the question is,

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: Steve Beaumont.vcf Type: application/octet-stream Size: 215 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041226/1c213f8a/SteveBeaumont.obj

Sirs, Thank you for your quick response. But when i try to make a call to FWD the following error appears: For example, when i call to 612 (a service number of FWD) -- Executing Dial("SIP/Phone4-e85b", "SIP/612@fwd.pulver.com|90|Ttr") in new stack -- Called 612@fwd.pulver.com -- Got SIP response 500 "I'm terribly sorry, server error occured (1/SL)"

I bought three plus two Grandstream BudgeTone 101 phones. The shipping cost more than the phone itself from Pulver store. The first shipping had one phone defect. Nothing on the display. (Can happen!) The second shipment had one phone with a defect display, but it still worked. The second phone's handset was defect too (microphone did not work). Changing the handset from this one to the

I have a small HUGE problem with *. I have installed * but I have 2 problems. 1 - Making call to FWD. 2 - Receiving call from FWD More info of the problem at the end. Here is the sip.conf file. ; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = sip ;default Default for incoming calls register =>

Anybody care to muse on Wi-SIP vs. SIP-DECT? My limited research indicates that none of the WiSip phones will ever be able to match the performance of DECT phones. Maybe I'm wrong but a Wi-SIP phone seems like a DIESEL sports car. There is nothing wrong with the technology, but it seems like a shoe-horned fit into the requirements of a wireless endpoint. DECT uses a wireless radio layer

I have setup a dedicated print server running on RH 8 with Samba 2.2.5-10 and LPRng-3.8.9-6 to service a HP9000 printer. The print queue for this HP9000 gets it print jobs from a Windows server via a script and the queue is set to HOLDALL status. The HOLDALL status is necessary because the script runs overnight to produce the print jobs which can total anywhere from 500 to 12,000 individual print