similar to: X100P FXO PCI Card

Hi, Does anyone know where I can get a telephone card that will fit into the PCI slot on my PC and work with the UK telephone system (BT) ? I would really like the retailer to be based in the UK if at all possible ? Also, is there any way to set up asterisk so that only certain phones can make external calls, but all phones can receive incoming calls if they are routed to that phones by some

Hi, I have got one X100P telephone card in my Asterisk server and it's working well. I have two phones lines and would like to install a second card so I can use both lines. I have installed the card and tried to set it up, but all to no avail ! Could someone outline the changes that I need to make (and in which .conf files) in order to get the second card going ? Thanks in advance,

What is the proper method to install/configure an X100P FXO card? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031009/ce8a7803/attachment.htm

Is the X100P FXO PCI Card capable of detecting a fax, answering the call, and then emailing the fax content to an email address? Thanks. Paul.

Hi We are trying to get better sound quality out of the prompts on our Asterisk system. We had some new ones made by thevoice.digium.com and they are in WAV format instead of the default GSM format on the Asterisk server. The problem is, when you dial in to the server using the FXO card (X100P) you really can't tell the difference between the WAV prompt and the GSM prompt, however, if you

Hi I have the X100P card which as to sockets (LINE - for fxo line ) and PHONE (to connect a n analog line) This card is setup as fxs_ks I was getting dial tone but suddenly no Dial Tone....Help appreciated.... When I try to route the Call using - Dial Zap/1) to this FXO Line I get this error: ------------------------------------- linux*CLI> -- Executing

Just installed the new 4-port FXO card and moved two pstn lines from existing x100p cards to ports on the FXO card. All zapata.conf entries that were functional on the x100p's were copied to the new FXO channels (including callprogress=no). Observations thus far: 1. asterisk will spontanously decide a pstn call has arrived, and ring the sip phone designated in the dailplan. Verified

Hello List, Im just dipping my feet into the asterisk world, and im having major fxo problems Im running Asterisk (from svn) + libpri (from svn) + asterisk-addons (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a Debian Etch box, with 1gb ram, running all of the services for my home server (web / db / music server etc), and i would like to run my PSTN line from Kingston Comms,

Hi, When I installed my X100P card there was a two ring delay before the phone started to ring. I managed to solve that by stopping the Caller Line ID being passed to the phone. I'm in the UK so that doesn't matter anyway. The problem that I have now is that when a call comes in on the external phone line and it is answered by a standard phone (not connected to Asterisk), the IP

I know the X100P cards are not supported by Digium any more, but for home office use, are they still acceptable? I have two POTS lines, one residential and one business line comming into the house. I'd like to get both into my * server and $15 total compared to > $100 for the newer TDMxxx card sure is desirable. Having said that, will the sound quality, functionality, stability, etc. be as

I have two X100P card in my box. I want to connect regular phone (not the phone line!) to one of thse cards. Does anybody think about the same? I don't really want an expensive solution buying additional card with FXS port, I prefer to make something by myself. It'll be great if somebody can point me to technical materials or show electric scheme of such converter. I believe it should

Hi all, Is there any alternative hardware components for multi port FXO cards, other than Single and E1 or T1 level? For example 4 or 8 port FXO card is ideal. Also the price matters. Thanks!

Hello All , In some ocasions i?m getting a problem with my X100P board. I?m trying to trace tre problem , but i didn?t find a possible answer. -> I get those messages when trying to use Zap Channel Sep 29 14:15:46 WARNING[-1094796368]: chan_sip.c:2107 sip_new: Unable to allocate channel structure Sep 29 14:15:46 NOTICE[-1094796368]: chan_sip.c:7283 handle_request: Unable to create/find

I get echo on my X100P for about 15 seconds then it disappears. Believe me, when I get a chance I'm going to tweak it since my wife nags me about it. I converted my house over to *. My setup: Compaq Deskpro EN SFF P3 500 Dual NIC for real IP and internal IP X100P Card for PSTN. Cisco ATA186 (two cordless phones for the old lady) Cisco 7960 Phone Cisco 2621 w/ 2 FXO's and 2 FXS (Fax is

Message: 20 Date: Mon, 16 Jan 2006 00:18:18 +0000 From: Mike Hemstock <mike@csits.net> Subject: [Asterisk-Users] Choosing an FXO card To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Message-ID: <200601160018.18517.mike@csits.net> Content-Type: text/plain; charset="iso-8859-1" Folks, I'm looking at buying an FXO card

Hello my brothers and sisters, Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" and "Asterisk" Package? or i need also to other cards or packages? and if "X100P" card not suitable to VoIP, please recommend a another card, (please take in your account that i would like to connect standard analog line to the card

PROBLEM: My x100p only does bad things. When I plug the line from the wall into the card, other phones in my house go nuts, no dialtone, crazy clicking, random tones, etc. Following the steps below, the line is screwed up any time I test after step 2. Just plugging the line from the wall into the x100p takes my other phones off line. External calls to my line hear busy. Obviously, can't

Hello, Can anyone tell me what the "normal" number of interrupts per second is for an X100P card? I've used FreeBSD 5.3 and a linux 2.6.11 kernel on the exact same hardware (only the disk changed) and `systat -vmstat 1` on FreeBSD and `procinfo -dS -n1` under Linux. For both, I'm seeing roughly 1000 interrupts per second on my X100p card. It was a bit worse under FreeBSD, and I

Hi, I'm thinking of purchasing a TDM400P card and was wondering if anyone has experienced any echo issues with phones off these cards connecting to the PSTN via the X100P cards? I have had my fingers burnt with a Voip phone > X100P. Cheers, Taff. --------------------------------- ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself -------------- next part

I have an X100P used, at present, largely for outgoing calls. It shares the single incoming POTS line with a number of analog phones. Is it possible to talk the X100P (Zap/1) to answer a ringing call only if I ask it to? I'd like to use only the SIP phone in my office, but let the analog phones continue to work in the rest of the house (until I can afford FXS cards anyway..) I can force