similar to: Reorder tone ...when it should be Busy...

These taken tonight (9/22/2004) at the Expo and Reception Enjoy. http://photos.tropiano.org/gallery/astricon-2004 Lenny

I am originating a call to a Local channel using an Originate Action: Action: Originate Channel: Local/dial at outdial Context: outdial Exten: answer Priority: 1 Timeout: 45000 ActionID: some_id In my dialplan, I have this: [outdial] exten => dial,1,Dial(${DIAL_STRING}, ${DIAL_TIMEOUT}) exten => dial,n,NoOp(Dial Status = ${DIALSTATUS}) exten =>

Hello, we have a PRI (E1) to a carrier and a second one to a legacy PBX: DTAG ---pri---- * ------ Hicmo (PSTN) | | Sip and more Many normal inbound calls are direcly routed to the hicom. Outbound calls from the Hicom go through LCR and then to PSTN. Inbound faxes are working, but outbound faxes from hicom to pstn are

Hi, I'm looking fore a way to play a dial tone before our IVR platform answered the phone line. I want to use for the following reason: When a caller calls our Voice Platform, the call will direct dial out to a number. I want to dial out before the inbound call is answered. But now the inbound call here's nothing. When the outdial call is picked the inbound call will here

Can I get the voicemail application turn on / off the MWI (message waiting indicator) on the Cisco 7960?

Hi, I am using phpagi for agi scripting. and want to update callerid number but didn't get any success. please help me how to update PHPAGI is new for me. Below is the code which I write. #!/usr/bin/php -q <?php set_time_limit(30); //require(.phpagi.php.); include("phpagi.php"); $agi = new AGI(); //answer the call $agi-> answer();

Hi! I have an T1 line for using with IVR AGI. I receive the calls in my T1 but my dialplan has an error but my extensions doesnt have the error that show me asterisk. I dont know from where asterisk take extension 8 and how is playing ss-noservice because in my dialplan is not exist. Any help or any cluees? Verbosity was 5 and is now 7 -- Starting simple switch on 'Zap/1-1' ==

The echo canceller algorithms aren't doing anything. We get extreme echo during the conversation, it appears even before the call connects, the echo is there... This only happens with SIP to/from WCFXO (analog POTS). Looking at the Zaptel configuration: /etc/asterisk/zapata.conf: echocancel=yes echocancelwhenbridged=yes rxgain=0.8 txgain=0.8 (although none of the above options

Hello all, I've been playing around with early audio, and I'm able to get some things working We have PSTN calls coming in to asterisk in SIP from a Cisco AS5300. If I do the following: Exten => i,1,Playback(ss-noservice,noanswer) Exten => i,2,Congestion(15) Exten => i,3,Hangup() The PSTN caller does not get an answered call (doesn't get billed) but hears the ss-noservice

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) --

I would like to use * as a standalone voicemail system. As such I need it to be able to outdial a certain extension for MWI-ON and another extension for MWI-OFF Is there anyway to get * to automatically dial an extension when a voicemail is left and another extension when the mailbox is cleared? Thanks -------------- next part -------------- An HTML attachment was

All, I would like to play an announcement to the user on what external line a call came in, right before this call get bridged to this user. How would I go about implementing this in * ? Regards, Hans -- The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may

Hi all, * was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a Today chan_capi stopped working, without any changings at the system. It seems, that not * is the reason, because isdn-log also shows no calls. If I try to call * from outside via capi, I only get a busy. That is the try from inside to outside: stern01*CLI> -- data = @89930:0107901723168212 -- capi

Hello - I never heard back on this and continue to experience this bug. Can someone help me to locate the patch for this so that I can be sure it's included in my source? It's not happening on every boot, but about every other or third. And just as described in the bug report (the boot works OK, but at the end rather than GDM starting nicely, I get a "fuzzy" screen and the

Hi all, I have a connect between a siemens hipath & Asterisk system over PRI The connection works perfectly I can call from the Hipath to an Asterisk Extension. I want to allow the hipath extensions to dial out over a SIP trunk on asterisk but I keep getting "The number you have dialed is not in service" In this CLI I'm dialing from hipath extension 9 (prefix for sip trunk)

> Post your extensions.conf and what's on the CLI (asterisk -r) As requested: # cat /etc/asterisk/extensions.conf [incoming] exten => s,1,Answer() exten => s,n,NoOp(CallerID is ${CALLERID}) exten => s,n,NoOp(DID is ${DNID}) exten => s,n,Background(enter-ext-of-person) exten => 1625,1,Playback(digits/1) exten => 1625,n,Goto(digits/1) exten => i,1,NoOp(CallerID is

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>

GoIAX, the Asterisk community's free IAX provider, is offering free US dids now. I loaded about 175 dids in and put up a very beta sign in page. Unfortunately I had to restrict the free us/canada outbound calling back down to toll-free only. There was a lot of war dialing and prank calling going on. I'm working on some stuff to hopefully curb that kind of stuff down so I can

First off, I also posted this on the digium forums so if anyone here also reads those, sorry for the cross-post. When I place an outbound call using SIP to my cell phone, asterisk immediately starts processing the dialplan without waiting for the call to be answered. We could handle this on DAHDI using callprogress, but I don't know of a similar setting for SIP. Here is the contents of

hi, i have connected a SNOM 200 to the asterisk. here are my settings, Codecs ------- Default codec - g.711u/g.711a Packet size - 20ms Negotiation - Interoperable Type - 160 DTMF ---- Inband - negotiate Outband - negotiate Payload Type - 101 when a call comes to the SNOM or when making an outdial, following warning messages are coming on asteisk, WARNING[1209214400]: File dsp.c, Line 1198