similar to: NO DTMF detection in the Outgoing call with GW Cisco5300

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

Guys. I need some advice on some h323 issues. I need to test connectivity from Asterisk to a Cisco AS5300 that has PSTN lines and to cisco 3600 voip routers. H323 needs to be used here but I was wondering if anybody has linked Asterisk to these Cisco routers before? Thank you for any pointers.

I'm stuck running a old copy of asterisk because something strange is going on in later versions of the CVS.. When I call in from a PSTN into my cisco 2610XM gateway which then routes the call to my asterisk box via sip.. Asterisk can no longer process DTMF tones generated by the calling party. This affects DISA, prompts and menus.. Has anyone else had this problem?? and use.. I DO have

Hello, I've got an ISDN PRI circuit terminating in a Cisco AS5350, which in turn is talking to an Asterisk server via SIP for call origination and termination. Seems simple enough, and it works for the most part, but: 1) Caller ID name data comes in on the PRI, but doesn't appear to get handed off to the Asterisk server via SIP, at least not in any format that Asterisk

Hello, Has anyone experienced a segmentation fault in asterisk for using G729 against an AS5300 in SIP ? I'm having this problem. Also, any other codec I use gives me incompatible media (can be read in SIP DEBUG messages). AS5300 configured for multiple codecs, so is Asterisk. Tried G711u/A G723 and G.729. Any clues ? Regards, Jorge A. Info: Asterisk ver 1.0.7 stable Using AMPortal

All, I've found problems in my setup with the latest couple of revisions (1.135/1.136) of asterisk/channels/chan_sip.c In my setup I have a RH9 asterisk server, AS5300 (single E1 to PSTN) and a dozen 7940's, everything is in the same VLAN and only running SIP. Outbound calls work fine: 7940 -SIP-> Asterisk -SIP-> AS5300 But inbound calls fail, I see the initial INVITE from the

Greetings, I am attempting to configure an AS5300 to provide a SIP based gateway to the PSTN from Asterisk. I have been unable to identify through the docs how specifically this should be configured in Asterisk and have not been able to get things working through trial and error. I am sure I am missing something fairly obvious here but any guidance (or example cfgs) would be much appreciated.

Hi i test a new equipment on my backbone: a Cisco AS5300 with voice dsp ressource connected at a E1 Voice Link. I want that all call incoming on the cisco 5300 are sent to Asterisk and all Asterisk outgoing call are sent to Cisco AS5300. Actually, i configure the AS5300: isdn switch-type primary-net5 ! voice service voip sip ! voice class codec 400 codec preference 1 g711alaw codec

Hello, I'm trying to receive faxes with asterisk. My configuration is like this: PSTN fax -> ISDN -> Cisco router with VoIP module -> Asterisk When I try to send a fax from PSTN fax I got the standard fax signal, Asterisk starts rxfax application and then call ends and there is no tif anywhere. On the fax display there is still one message: Calling... Part of my extensions.conf:

>Please I have combed the Archive to no avail on this problem protocol >control problem in oh323. >I'm receiving calls from CISCO AS5300 -> Asterisk -> Zap Channel. The >calls clears the remote location but drops on my own end. Please what >could be >wrong. I have included the oh323.conf and log files. I have tried >various configuration and I thought I should

hi .. i've just installed and licensed an instance of the G729 codec. I am trying to connect through asterisk to Go2Call server .. According to their info it involves dialling extension 729 on voip01.go2call.com, to get the IVR. my extensions.conf shows : exten => s,2,Dial(OH323/h323:729@216.52.153.206) which I think is correct, I have G729 enabled in the OH323.conf file and it seems to

Hi Now, my Cisco AS5300 sent call to my asterisk, but two problems: When i call the phone number, i have: [Oct 28 06:01:16] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension '0426000000' rejected because extension not found. [Oct 28 06:01:18] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension

Hi all. I have a strange problem, I've got a AS5350 hooked up to a telco using two trunked E1's The 5350 should only act as a GW to a sipproxyserver. THe thing is it seems to be only oneway audio? There are no firewall at all, and the audio still only get one-way When I call from pstn --> as5350 --> sip-sip-phone I can here the sip-phone ,, but the sipphone cannot her the

Hello all, I have a cisco AS5300 which is register with a gatekeeper and a Asterisk server also register with the gatekeeper. PSTN ---->AS5300 ---->Gatekeeper ---->Asterisk I set up a conference room on the Asterisk sever (Room No 1234). I try to call from PSTN to AS5300, The AS5300 will call the Asterisk server through the gatekeeper. I manage to get to the start of the conference

Hello, We have a sip trunk end point with cisco media gateway. VoIP works fine. But when we try to send faxes thru this trunk, we simply can not. Is there anybody experienced such problem and solved? How should i set sip.conf and udptl.conf. I already have t38pt_udptl=yes in sip.conf Thank you.

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

Hi folks, The obligatory newbie disclaimer: "Hi, I'm new to Asterisk and I have a couple questions..." OK, now that that's over with: I've just started working for a small CLEC, and I'm trying to sell * to my boss as a replacement for some expensive/inflexible/closed-source software he's been using to provide residential dialtone with for a couple years now.

Hello, We are working on implementing a solution for a medium service provider. They were previously using a Cisco AS5300 gateway with some PRI trunks to receive modem calls, then route them out the Internet. The Telco they were buying the trunks to discovered this configuration and restricted them due to legal conventions, and stated that in order to continue doing this, they would have to talk

Hello, I have a Cisco AS5300 connected to Asterisk (1.6.2.9) Between 15-16 minutes, the call is disconnected without reason. Here is what is displayed in the debug: Received an SDES from 10.4.0.10:17399 -- Got SIP response 420 "Bad Extension" back from 10.4.0.10 -- Stopped music on hold on SIP/as5300-1-0000004d == Spawn extension (dialin, 065939191, 2) exited non-zero on

Good time of day all! 1) I am trying to use as5300 and asterisk. As5300 sends calls to me. I get the following in * console: -- IAX2/magrathea/6 is making progress passing it to OH323/R27464 Sep 8 10:57:59 NOTICE[1140046640]: chan_oh323.c:1159 oh323_indicate: Ignoring PROGRESS indication. As5300 user does not hear anything, just silense instead of dial tones. My config is oh323.conf