similar to: New Version of SJPhone

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

Folks, I've been following recent discussions regarding echo and echo training with much interest, since it's a problem we've never been able to eliminate here. We're facing two challenges presently, and they may be related (or not): a) Cisco 7960s in the office here echo back to our staff, but the customer hears decent sound. b) We've yet to be able to pass faxes through

Hi, I am using SJPhone here for testing ivr with Asterisk. I haven't seen any problem here yet. I have tried different things for that and finally got it working. I am not an expert to explain more about that, but here is the general section form my sip.conf. dont know whether it will help... [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ;

T.38 is often put forward as the solution for reliable FAX over VOIP. Just wondering for anyone using T.38 (with any equipment), how well does it work as compared to a FAX PSTN call? Thanks. Jim James H. Thompson jht@lj.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041129/3ea08b2c/attachment.htm

Hi, I would like to set up a high density FAX/PBX server, am looking at using Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this possible. I know Extensions can be reserved for voice OR fax with the combination of chan_capi used for * voice, capi4hylafax on fax but then channels must be dedicated rather than shared ie. would like to be able to answer voice/fax on same DID.

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Hello, I have spandsp setup to accept incoming faxes and receiving tif files via Email. Using tiff2pdf, or tiff2ps -a2 or even tiffsplit, the last page of the fax is cut off and the quality of the text looks "squished". I "figure" it's a tiff parsing thing, as opposed to a problem with my spandsp installation (heh). Has anyone experienced the same thing, or can

What are your experiences with faxing through Asterisk to the PSTN? We are using g.711u as a codec, and are originating/terminating with Broadvox as well as through our own PSTN gateways. We have had some luck with incoming faxes coming into our network from Broadvox DIDs. They work 50% of the time. Not sure yet on PSTN incoming since nobody that is using FAX is in our local rate centers.

I'm trying to get a Carrier Access Corp. Channel Bank I working with a Digium T100P without success. What is stranger is that the status lights on the channel bank and T100P seem to change almost each time I power cycle the channel bank or reset the T100P. The channel bank has three status lights: T1, Framing, Status. T1 is green, Status is yellow, and Framing is usually red but sometime

Hi, does anyone have any recommended (read tried and tested) way of making asterisk be able to handle incoming faxes. I've a PC running asterisk with a digium E1 card in and simply want to be able to route a call to some application which will take a fax call and save the fax as an image. I guess the bits I'm unsure of are how to terminate a fax call without a modem (if this is

Okay fellow Asterisk users... Listen up (or perhaps more appropriately, "read down"). The Asterisk community is growing at a remarkable pace. I know there are thousands of you out there -- in fact there are over eight *thousand* subscribers to asterisk-users alone, and almost one *thousand* registered users on the bug tracker. The #asterisk IRC channel is consistently in the top 10

Hi. I have sjphone installed on windows and working except for dtmf. I read the docs for sjphone and it uses inband dtmf. I configired dtmfmode=inband but it still does not recognize it. Someone on the lists said that inband only works using alaw or ulaw but i tried only allowing that too but still no go. Hmm.. any other ideas? I can't get any other client to work on windows :-/ I

I am having a problem with softphone registration, having read the list and watched it for a while for similar problems I just cant seem to figure out the problem. Using SJPHONE or DIAX , I can make outgoing calls but I can't get them to register with asterisk, I have other sip devices registering OK-7940's. From the list and the digium web site this seems to be a straight forward set up

I recently setup an Asterisk Server- I was able to follow a tutorial from http://www.automated.it/guidetoasterisk.htm#_Toc49248752 Until it told me to call another line, let it ring until voice mail picks up. My problem is the tutorial left out how to configure a SJPhone so that it connects to my asterisk server not directly FWD. I've tried everything I can think of, I must be missing

I am having a problem with SJphone registration, having read the list and wathced it for a while for similar problems. I just can't seem to figure out the problem. I tryed to follow a tutorial from http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+sjphone, but in SJphone (SIP tab), I can't find the following setting. Use local outbound proxy - checked. Proxy IP Address:

Hi all, I've my Server running well, then sometimes Sjphones looses registry and it only works well again if i restart the pc running sjphone. Has any one experience this? Best regards, Marco Mouta

Today's "frustrated programmer" award goes to Linphone, which has the following debug output: > (linphone:28655): LinphoneCore-WARNING **: this fucking remote sip phone did not answered properly to my sdp offer! I get this message when I connect to linphone using a softphone, or when I try to use linphone to connect to asterisk and listen to an announcement. I suspect that

Hi, I'm following, http://www.voip-info.org/wiki-Asterisk+phone+sjphone. However, I cannot find the SIP tab. Would someone please give me a few pointers? The screen capture can be seen at URL below http://www.dslreports.com/forum/remark,12022987~mode=flat Regards, Norman Zhang

Dear all, Just wanted to know if any one had deployed the Grandstream GXW 4024 yet. Wanted to hear any feedback and/or problems with this unit that you may have experienced. Thank you. -- Faraz R Khan Chief Architect Emergen Consulting Pvt Ltd www.emergen.biz