similar to: PRIMARY=wcfxo?

Thanks in advance root@asterisk01:~# modprobe wcfxo /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

Hi, Thanks for giving me a detailed reply on hardware needs steven. I have been looking at the archives in detail and found a few people have had problems with zaptel compilation on suse(kernel-source-2.4.19.SuSE-342 // gcc 3.2.2 ) ... is shifting to red hat the only viable scenario...would be a pain cuz suse comes with sun java desktop system( just bought it !! ) ... any fixes would be a

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

(I'm producing a writeup on all the things one run into building an * box. Which after a couple of boxes is showing up aplenty.) So this uses the working h/w and config's from another box. All I do is build in a new computer. Loading the modules I got: __________________________________________________ Zaptel Configuration ====================== Channel map: Channel 01: FXS

i have error in install module of tor2. but it compile good. what happen ? ivr2:/usr/src/zaptel # make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f gendigits tones.h rm -f libtonezone* rm -f tor2ee rm -f core cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o

I'm trying to figure out how to start *..... Rh7.3,CVS,TE410P,TA750 If I just try the way the docs spell it out "/usr/sbin/asterisk -vvvc" it fails...... /var/log/asterisk/messages Oct 3 22:23:34 WARNING[1024]: File chan_zap.c, Line 610 (zt_open): Unable to open '/dev/zap/channel': No such device Oct 3 22:23:34 ERROR[1024]: File chan_zap.c, Line 4930 (mkintf): Unable

Hi , I picked up a x100p the other day and thaught I'd havea go at getting the driver going for linux 2.6, things have gone pretty, two basic problems. 1. makefiles, with 2.6 you can't get away with using the old makefile to build the kernel modules, they will build but you'll get an error along the lines of "no module found in object". This is due to not using the new

Hi folks. I am using a X100P card and after some random amount of time of correct operation, say 8-20 hours, the card starts acting up and producng horrid sound quality which is all broken up. All other channels appear to work fine. One thing I noticed, is that "zap show channel 1" always shows the "Actual Hookstate: Offhook" as soon as the telco line is plugged in. Is this

Hi guys, Thanks for your answers on my two questions yesterday. That's exactly what I was looking for, sorry for not noticing it myself, but I'm still getting acclimated to Asterisk and even Linux--from what I see so far, I love it. I've got another one now. Since my Asterisk install and configuration is fairly stable at this point, I'm interested it ensuring that during

It's nice to be able to define the list of asterisk modules we want to load from the /etc/sysconfig/zaptel file rather than directly in /etc/init.d/zaptel. I'm using nufone and don't require anything but the ztdummy (is the rtc-based module better, anyone?), so that's what I've put here. These are based on zaptel-1.0-RC1. John --- zaptel-1.0/zaptel.init.ole

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

I just installed two new X100P's today in my RH7.3 box and was poking around /proc What does the RED refer to on board 2? /proc/zaptel/1 Span 1: WCFXO/0 "Wildcard X101P Board 1" 1 WCFXO/0/0 /proc/zaptel/2 Span 2: WCFXO/1 "Wildcard X101P Board 2" RED 2 WCFXO/1/0 Any clues on how to setup channels on the two interfaces?? I am up to here in

Hi all, After reading great things about the OSLEC Echo Canceller (http://www.rowetel.com/ucasterisk/oslec) and seeing the reactions of people who have tried it on a recent Trixbox thread (http://www.trixbox.org/forums/trixbox-forums/open-discussion/need-people-echo-problems), it sounds like it is the "bees knees" for sorting out echo problems with cards like the x100p. Has anyone

Hi, i can't compile the latest svn update from zaptel: /lib/modules/2.6.14-1.1653_FC4smp/build make -C /lib/modules/2.6.14-1.1653_FC4smp/build SUBDIRS=/usr/src/zaptel modules make[1]: Entering directory `/usr/src/kernels/2.6.14-1.1653_FC4-smp-i686' CC [M] /usr/src/zaptel/zaptel.o /usr/src/zaptel/zaptel.c:6193:5: warning: "CONFIG_ZAPATA_DEBUG" is not defined

Hi, I'm trying to figure out why my Sweex CA000022 is not detected by wcfxo on my SuSE Pro 9.3 running on a VIA EPIA SP motherboard. The card should work as its an Intel 82537EP based card. When Booting the IRQ assignments for the board indicate: Bus Dev Func Vendor Dev Class 0 20 0 8086 1080 0703 lspci shows: 0000:00:14.0 Modem: Intel Corporation: Unknown device 1080

I haven't seen anybody so far post a complex fix for the udev problems on FC3 with the latest kernel. On that note, I have a temporary fix to allow zaptel to load somewhat normally. I found that modifying the zaptel script to 1) load, unload, then load the driver modules and 2) insert a pause between modules seems to allow things to work. This assumes you have followed the instructions

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

I have a X100P and a TE110P in my Asterisk box. I can either get the X100P or the TE110P to work, but never both. Here's my zaptel.conf span=1,0,0,d4,ami e&m=1-24 fxsls=25 When I load wcte11xp and wcfxo, I will get this error. [root at asterix etc]# modprobe wcte11xp ZT_CHANCONFIG failed on channel 25: No such device or address (6) /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install