similar to: Asterisk to H.323 without gatekeeper

How do I get asterisk to populate the "Calling Party Number" field in an H.323 call? I have asterisk configured to accept a SIP call and connect it to an H.323 IVR system. The call goes through, but the caller id is put in the "Display" field rather than the "Calling Party Number" field. -----Original Message----- From: Skuse, Phil [mailto:Phil.Skuse@vicorp.com]

I have posted soo many times in the past but never recieved even a single reply . seem like you people are ignoring me or either way too busy .. never mind this is my last try . How can record a conversation with asterisk ? I tried to use Record() but dint work for me .. here is what i tried . exten => s,1,Wait,1 ; Wait a second, just for fun exten => s,2,Answer

Please I need help, I don't know why,almost every time I dial on my dect phones, the dialtone doesn't go off and * doesn't recognise anything!!!! I'm using two dlink voip gateways, MGCP: DL102s. Any ideas? thanks in advance michelle matis ----- Tu cuenta de correo gratuita Mixmail http://mixmail.ya.com Ya.com ADSL Home 24 h, Módem + Alta ¡Gratis!

I'm not sure if I am wording this correctly, but I'll try. I have a Cisco 2621 w/ a couple FXO and FXS ports. I have a couple cheap analog phones plugged into the FXS ports. I am able to get * to ring those phones when a call comes in, but I cannot get the phones to dial out. I guess it's all syntax that I'm doing wrong. Does someone have a couple small snip-its to accomplish

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

Greetings, I need if possibile an explanation on how to manage the incoming callerid for an incoming call. Let me explain the situation: We have two different companies in this office that shares the same PBX (* box). Each company have its own number for the incoming calls. What i'd like to implement is something that, depending on the incoming line that is involved in the call, plays a

I've been trying to figure this one out for a while, but to no avail. I have my cisco ubr924 setup for MGCP with Asterisk as the call-agent. I have manually registered the endpoint in mgcp.conf. When I pick up the phone, I get no dialtone and debug shows errors. IOS on the ubr924 is 12.2. Any help is appreciated. from mgcp.conf: [ubr924] host=65.37.86.203 context = from-sip (just as a

I'm trying to link up Cisco MGCP-enabled router (residential gateway) with Asterisk, and it looks like some sort of protocol mismatch, could it be MGCP 0.1 vs 1.0? Look at this (x.x.x.99 is the router, x.x.x.98 is Asterisk): MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427Verb:

asterisk*CLI> load cdr_unixodbc.so Loaded /usr/lib/asterisk/modules/cdr_unixodbc.so => (unixODBC CDR Backend) == Parsing '/etc/asterisk/cdr_unixodbc.conf': == Parsing '/etc/asterisk/cdr_unixodbc.conf': Found -- cdr_unixodbc: dsn is MySQL-asterisk -- cdr_unixodbc: username is root -- cdr_unixodbc: password is [secret] -- Connected to MySQL-asterisk it

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) --

Hi, in following of a recent discussion I got to work on MGCP with the Cisco ATA186 again, and got it to work very nicely. However, there is a little thing with transfers I would like to get comments on: Call comes in from PSTN and goes to an ATA186 (MGCP) Call is answered and then, using flash, transferred to another extension If the extension is available, there can be an announcement and

Hi, I want to configure * to use a gatekeeper for routing calls to H.323 endpoints. I imagine it will work like that: * (chan_h323) will query the gatekeeper where to terminate the dialed number and the gatekeeper will return the information for the h.323 gateway. after that chan_h323 will try to make the call to the gateway it has received from the gatekeeper. so instead of duplicating a

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i have a working Microsoft ISA firewall with buildin H.323 Gatekeeper.... So Far, i got registerd the asterisk on the M$ Gatekeeper... here is the h.323 configuration: ; Open H.323 driver configuration ; [general] port = 1720 bindaddr = 0.0.0.0 allow=all ; turns on all installed codecs dtmfmode=rfc2833 gatekeeper =

Hello, I am new to this list and to asterisk and going through the archive file I did not find an answer to my problem. I have a VoIP network working fine with multiple gateways registered to a Cisco H.323 Gatekeeper. I have successfully registered Asterisk as a GW in that network and also successfully registered two X-Lite SIP Client to asterisk that call to each other. I want to connect to

Hi every all, since a few weeks I came back to asterisk and tried to install version 1.6. The installation went fine so I decided to buy new dids on Voxbone. I have added the sip peers of Voxbone Belgium1 like this in the sip.conf [81.201.82.39] host=dynamic type=friend insecure=very context=your_context canreinvite=no qualify=no deny=0.0.0.0/0.0.0.0 permit=81.201.82.39/255.255.255.255 but

Hello I am a newbie to Asterisk. We have set up Asterisk on a PC with Redhat 9.0. We have installed H323 openphone on our PC's. We are wondering what a gatekeeper does. It seems we need one but what I have seen in this group is that a gatekeeper must be installed on another box on the network. As all our PC's on the network use Microsoft OS is there a free gatekeeper software for

Hi All; First of all, I am looking to have the H323 Gatekeeper service available at Asterisk, and really I do not know if 1.4 or 1.6 or 1.8 started implementing H323 gatekeeper functionality or not? Until 1.4.26.2 version, there is no h323 gatekeeper functionality. So, any implementation for this feature has been done in the other versions?

Hi all, i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper. Maybe, i do wrong anything.... I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gatekeeper. gatekeeper=x.x.x.x But no one of the

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

I'm trying to connect an Asterisk 1.6 to an Avaya with gatekeeper (CLAN). When chan_ooh323 first loads it tries to establish a connection with the gk but I it fails. I have the following extract from the ooh323 log. Can anyone give some insight? Thanks! MD 23:02:59:045 Sent GRQ message 23:02:59:045 GkClient Received RAS Message 23:02:59:045 Received RAS Message = { 23:02:59:045