similar to: Using asterisk as voicemail with SER

Hi, I saw your posting about the cisco ata186 I2 vs I1 and the simple vs complex impedance. I ordered a cisco ata186 i2 for use in Canada by mistake, didn't know that I needed the I1 version. Will the I2 version work in Canada with regular anlog phones, or will I need to change it. Thanks for your answer. Samy -------------- next part -------------- An HTML attachment was scrubbed... URL:

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Hi, I've been browsing for FXO devices, and I'm really surprised at their costs. Why such devices are so expensive and somehow hard to get ? Samy. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030805/a92ee327/attachment.htm

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

I'm sure asterisk would make a great stand alone voice mail server. Basically I want to get rid of our voice mail system and replace it with *, but the problem is we use a cisco cluster with skinny clients. So I was thinking the way to contact a * server, would be through our 3640. But so far any attempt has failed. I am wondering if anyone has done something similar. Just want to verify the

I would like to setup Asterisk for voicemail with CallManager 3.3(5). I would like to know what would be the best Distro of Linux to use and version, what version of Asterisk works best to interact with CallManager, and what H323 ChannelType works. As you probably read in another thread I tried FC5 with Asterisk 1.4 and OOH323 (included with the addons package). This doesn't seem to work to

Hello, I have Cisco CallManager 3.3.4 and Asterisk@Home latest version. I have earlier tried getting Asterisk to register with CCM via H323 and failed. Back then, I learned that this is a known bug in Asterisk. Also people who tried doing that had also succeeded in getting calls to go through only one direction like from CCM to Asterisk. I am not that expert so excuse my ignorance with this

Hi, Where can I find information on H.323 for Asterisk and/or integration with Cisco CallManager in particular? <http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration> I have oh323 working on Asterisk. Since the CallManger I am working with is running 3.3.3 I cannot use SIP... Thanks, Adi

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hello all, A client of us, is thinking to migrate their actual PBX to a Cisco CallManager. We want to sell him an asterisk box to complement the Cisco PBX. I think to use asterisk as a Voicemail server (Replazing the Cisco Unity) Has asterisk all the functionalities to replace a CIsco Unity server? Which functionalities Cisco Unity has than asterisk could cover? How could asterisk complement the

Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

Anyone have the 7970 xml config for sip yet? Aaron

Hi All, I haven't started sip traces or debug yet, but was wondering what the deal is with the CCM and reinvite, why it doesn't work with Asterisk (using 1.2.9.1). I can make calls back and forth all day with canreinvite=no, when I try to reinvite an inbound sip call from the CCM with Asterisk server 1 to Asterisk Server 2, I get one-way audio issues. All the RTP ports are configured

* compiled from cvs, i am trying call ip phones in callmanager 3.2 10.17.0.2 is my callmanager i noticed from network dumps that instead of sending rtp to the ip phone, * sends it to 10.17.0.2! thereby causing no audio from * to ip phone. audio from ip phone to * is ok. only callmanager calls fail. netmeeting works ok... here is the debug, thanks for any info ~kelvin H323 debug enabled --

Does anyone know how to customize the order of the soft keys on a 7960 running SIP? All the documentation I could find is CallManager related. Specifically, I want to move the transfer function to the first set of buttons during a call.

Hi..... I have just successfully setup Asterisk with 2 Cisco 7940 phones (converted for SIP) and a SIP softphone on a W2K box.....and it all seems to work very well.....to those who wrote this software, it is really cool. Anyway, I am new to this software, and I have a lot of questions which I am hoping someone on the mailing list might be able to answer for me.....I am basically trying to

I'm trying to use Asterisk for its voicemail capabilities while interfacing with a legacy Toshiba PBX. Is there a way to have Asterisk send a DTMF code to an extension to turn on the message waiting indicator light? When a user leaves a voicemail, I want Asterisk to pick up one of the lines attached to it, and then dial #63<ext>, which is what sets the message waiting indicator light

Hi, I downloaded the stable branch of asterisk a couple of month ago, and I'm using it as a SIP UA voicemail server with SER, and my setup works fine. I do have a list of phones defined in voicemail.conf, in the sip.conf file I only have the setup of asterisk as a peer registering to ser. The extensions.conf file contain the extensions that link to the voicemail application. This setup is