similar to: Asterisk and Avaya IP phones

Does anybody know if Avaya has a test SIP firmware available for 4620 and 4640 IP phones? The 46xx SIP image from their website is a combo download with SIP for the 4602, and h323 for the the 4620 and 4640. It looks like they demo'd a SIP image for the 4640 as far back as 2004: http://www.sip.org/von/2004/boston/slides/DSC_0042.php Thanks, Andy -------------- next part -------------- An

Hi all, I've been pulling my hair out for two days over this problem... I did *a lot* of Googling around, I searched the list archives to no avail - no one has the same problem! I have two Avaya 4610sw phones. I installed the latest SIP firmware using the TFTP server. So far everything looks good. Each time the phone boots, it retrieves the 46xxsettings.txt from the TFTP server. My problem

So far I have not found a way that I can register the Avaya phone with Asterisk. From what I have found so far is that Avaya phone needs the Avaya Media Server and Avaya Gateway. Looking at the h.323.conf (in Asterisk) and the file 46xxsettings.txt (avaya file located in tftpboot) there are no settings to make the phone initialize. I have sent an email to the Asterisk Users Mailing List to see

Hi, I am trying to use an Avaya 4602 phone, which I just updated from a very old SIP software to the latest I could find on avaya's site (032207). The upgrade went fine and it gets registered on the Asterisk server. Now, a couple of glitches, though. - The phone's web server is not working ... so I have no easy way to configure it. It used to work with the old release of the software. I

I attempted to update an Avaya 4602 phone to the latest SIP firmware and now the phone stops at the bootloader. It keeps requesting an appsip.ebin file from my HTTP server and is no longer checking my TFTP server for update files. Since no appsip.ebin file was included in the firmware update provided by Avaya, I have no idea where I am supposed to get this file. And also since it is no

Hello all, Has anyone used the SIP version of this phone with Asterisk? I see Polycom has a H.323 and MGCP version also, does anyone know if you flash the phone to swith protocols? Thanks in advance for the info. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm

I think I am the first to use the $135 Avaya 4602 SIP phone, but I need some support from the community to fix one problem I have with it. The phone stops working after about 20-30mins if I have mailbox=context in Asterisk; when I do have mailbox=contect in asterisk the sip debug returns "481 extension does not exist." Anyone willing to help me figure out why? I.E. Is it an Asterisk

Dear all, sorry for my OT but I need to know if Avaya voip server uses SIP or H.323 ??? Anybody can't tell me this...so I'm here for thei reason. Thanks a lot

I have an Avaya 4602 IP phone that was previously working with Asterisk. It was being used elsewhere for several months, and I recently set it up again to work with Asterisk. Everything works fine for several minutes -- I am able to receive and make calls as expected. However, after a few minutes, and every few minutes thereafter, I get the following message on the console: -- Got SIP

Hi guys, I installed asterisk and it's working really well. For now I`m using soft phones IAX and SIP but now I want to use the regular IP phone, what I have now is Avaya 4624 and I didn't find a firmware for SIP for this particular phone I believe now is working with H.323, can please someone advice me if exist firmware for this phone to register SIP or IAX2 with my asterisk box, and to

I'd like to start configuring my Avaya 9608G phones for use on Asterisk / FreePBX / PBX-In-a-Flash. I'm using a variety of other phones on my system without major issues. I've read the discussion back in March, May and August of 2016, but unfortunately, my difficulty is much more basic. I think it has to do with DHCP, specifically, what options I'm offering the phone via DHCP.

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

Currently I am having 2 issues with my Avaya 4602 phone: First, the phone registers with my Asterisk server, but when I start dialing I get a busy signal after 4 digits. I specified in the dialplan on the phone to expect 10 digits and that solved that problem, but I still immediately get a busy after the 10th digit. The phone never sends a dial command to asterisk. Second, asterisk is

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23] WARNING[6227]:

Hi, I'm trying to integrate my asterisk PBX to an Avaya PBX. I am using chan_ooh323 from asterisk-addons. I am able to make a call from SIP Phone -> Asterisk -> Avaya -> Station (phone) and vice versa. I am also able to make a call from SIP Phone -> Asterisk -> Avaya -> PSTN. However I face problems when I make DID calls from the PSTN. The DID calls are made through

I have added H.323 support for ASTERISK PBX using the OpenH323 library. I thought that since the Avaya IP phones are H.323 phones I will be able to make them register to Asterisk server. Does anyone know if this is possible ? Katerina

Hi I've a softphone account to a AVAYA H.323 system, basically, it has a numeric ID (which is the extension number) and a numeric password. Instead of using the default AVAYA softphone (H.323), can I make asterisk as a H.323 client and login to the AVAYA system via any one of its h323 modules? -------------- next part -------------- An HTML attachment was scrubbed... URL:

I just connected an Asterisk server to an Avaya Pbx using the instructions at: http://www.voip-info.org/wiki/index.php?page=Asterisk +Avaya Everything seems to be working as I can send and receive calls. The only detail I am having a problem with is that when an extension on the Avaya calls an Asterisk extension, I only get the name part of the CID, not the number. From Asterisk to the Avaya

Hi List, Ive got a bunch of Avaya IP9640 that we want to convert to SIP and then hook up to Asterisk so we can dump this overpriced Avaya system. Ive got ahold of the SIP firmware, but I cannot find anything on how to convert the phone itself to SIP, when I go into setup mode it wants a "command" which im guessing is the program code like the rest of the Avaya systems works. Has anyone

I am facing one way audio problem in sip trunking between asterisk and avaya. +-------------+ +----+ | avaya sip |-------| P1 | +-------------+ +----+ | | | +-------------+ | Asterisk | WAN