similar to: Voicepulse and IAX

I'm trying to use Jeremy's suggestion of dialling using just the peer name instead of user:pass@peer but I'm running into some really funky issues. It does the same thing with both VoicePulse and another * server I have. [voicepulse] type=peer host=gw5.voicepulse.com trunk=yes user=USERNAME pass=PASSWORD and in my dialplan: Dial(IAX2/voicepulse/${EXTEN:2}@VPWS,90,r) The log shows

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

Greetings, I have been experimenting with Asterisk for a few weeks and finally decided to take the plunge and purchase a few DIDs for inbound calling. Our attempts at IAX/IAX2 connectivity with VoicePulse have been less than successful. We get "Registration Refused" errors from Asterisk whenever we launch the server. The front-line support folks at VoicePulse suggested that we are

Hello- I'm obviously doing something wrong here in trying to get an inbound DID to work with voicepulse. I have an outbound context set-up for those calls in iax.conf, and the appropriate register in- statement. within extensions.conf I am doing something like this: exten => 212xxxxxxx,1,Dial(SIP/admin,t) (where admin is the phone i am looking to forward to from sip.conf). i'm

Hello: I am new to the list. I am trying to set up asterisk with voicepulse. I have a voicepulse username + password, and SIP DID. When I login to voicepulse, I have this under my devices tab: Devices *Login:* Sysxxxxxxx *Password:* xxxxxxxxxx *Context:* VPWS *Connects to:* gw5.voicepulse.com My question is: Do I need a 2.4.x kernel? Currently I am running Debian/stable stock 2.2.x ? Has

I have a DID with VoicePulse Connect, but the sound quality is horrible, it is often choppy and the caller's voice cuts out for 2-3 seconds at least once a minute, I have contacted VoicePulse many times, and they do not do anything about it! Does anyone have any similar problems? It isnt my Asterisk config because I have 0 problems using NuFone.

I've been using my voicepulse connect number for over a month now, but today it simply won't connect. My partner and I each have a number, both are mapped in my iax.conf and extensions.conf files. This has been working fine. Today, either number gives this message: Feb 16 21:53:14 NOTICE[4330]: chan_iax2.c:5757 socket_read: Rejected connect attempt from 66.234.228.170, request

Does anyone know what happens if you try to have 5 concurrent outgoing channels with VoicePulse Connect? Does it give you an error message or a reorder or something? I'm worried about using them as my primary carrier if this is the case. I noticed that they supposedly only allow 4 channels for free and then you have to pay $20 a month extra per channel. I'm guessing this is for inbound

In response to the postings by Andrew Kohlsmith and Ernest W. Lessenger: Andrew, I modified the exten line in extensions.conf as you suggested. Unfortunately, It still does not work... Ernest, I spent approx. 4 hours reading list archives (and anything else Google served up) on how to configure iax.conf and extensions.conf to work with Voicepulse. Then, I sent an email to voicepulse

I have two questions regarding number portability... 1) If I port a DID over to Voicepulse, can I then move that DID elsewhere somewhere down the road. Or does voicepulse now OWN that DID? 2) Can I take a DID assigned by Voicepulse and transfer it to someone else? If not, why? -jwb

I'm looking to set up multiple inbound Voicepulse Connect lines and have Asterisk route them direct to different IVR or Voicemail based on the inbound number that is called. Unfortunately, I just can't see how one would go about identifying the number that is being called. Has anyone been able to do something like this with Voicepulse? I appreciate any assistance. Phil

Has anyone been able to get * working with VoicePulse OpenAccess (SIP not IAX). I have found a ton of information about VoicePulse Connect but very little on the proper * settings for OpenAccess. Tried contacting VP with no response. If anyone has this working, can they share their extensions.conf and sip.conf files? Better yet, if it could be posted on the Wiki. Keith

I can ping it just fine. I am on gw5.voicepulse.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040615/054c83f4/attachment.htm

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

Dear Sirs, Anybody ever tried running SIP up against Voicepulse? On their http://connect.voicepulse.com they claim they support both SIP and IAX, but I can't seem to get SIP running. I have as mentioned before on this list - huge problems getting any timing devices running on some of my machines, so IAX is not really an option right now. If I try I get a "Service Unavailable"

I'm having trouble configuring these services the way I want. Basically I prefer using iLBC before GSM, however Iaxtel only want to talk GSM. It _seems_ that Voicepulse prefers GSM also, because even if I put ILBC before GSM in the "allow=" part of iax.conf, if GSM is mentioned, Voicepulse will use it. If I don't allow GSM Voicepulse will use ILBC. Does anyone know how to

Is anybody else out there using VoicePulse Connect and having problems this morning? I just noticed that they have absolutely no contact information in their website.. just want to make sure I didn't break something in my asterisk configs. -fedl

I don't know if this has been mentioned yet: Voicepulse is now offering wholesale pricing and IAX2 connectivity for Asterisk users. No fees, pay as you go. They also offer incoming calls for $7.99 per month. See wholesale.voicepulse.com.

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

...my VoicePulse Connect account is timing out on its login requests. Was working fine a hour ago. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc. mgraves@mstvp.com o713-861-4005 o800-905-6412 c713-201-1262 "Can't you see it all makes perfect