similar to: Unable to find a path from ULAW to G723

anyone has idea what problem can be here, something with codec but i have today CVS version and grandstream phone with 1.5.0 firmware.I try to change codec in phone and also in asterisk-sip.conf but the same. What can be problem ? tnx, Tomaz *CLI> -- Executing Dial("SIP/102-767c", "CAPI/2:5") in new stack -- Called 2:5 -- CAPI[contr1/2003002]/0 is making

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

I receive the following error when I try to call another H323 extension from another H323 when going through *. NOTICE[27669]: File channel.c, Line 1325 (ast_set_read_format): Unable to find a path from 1 to 8 NOTICE[27669]: File channel.c, Line 1296 (ast_set_write_format): Unable to find a path from 8 to 1 WARNING[27669]: File chan_h323.c, Line 528 (oh323_write): Asked to transmit frame type 1,

Dear all, I am getting the below errors when using asterisk. I am using sjphone for testing purpose. Below are the setting for sip.conf and extension.conf When i dial the number it rings on the remote telephone. but after ringing 1 time it will disconnect. Can anybody tell me what does this error means and the how to solve this issue. Thanking You, Joel sip.conf [general] context=default

I am experiencing a problem that from list archive it appears others are running into. When I dial from Cisco 7960 via the * to Free World Dialup destinations that supports G.729 the call fails. The major error from the debug log is Jan 15 00:11:14 NOTICE[22545]: channel.c:1481 ast_set_read_format: Unable to find a path from G729A to ULAW Jan 15 00:11:14 NOTICE[22545]: channel.c:1451

FYI, asterisk DOES now support g723, but you have to pay for it: http://store.yahoo.com/asteriskpbx/asteriskg729.html -----Original Message----- From: Dan Fernandez <danfernandez00@hotmail.com> Date: Mon, 5 May 2003 17:33:05 -0300 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Has anyone gotten SIP_CODEC= to work? Basically, since I?d like to use g723 for sip

I have installed G729 but I cannot make a outgoing call with it. SIP/dennis-2c23 is making progress passing it to SIP/1010-8b60 NOTICE[311316]: File channel.c, Line 1476 (ast_set_read_format): Unable to find a path from G729A to ALAW NOTICE[311316]: File channel.c, Line 1446 (ast_set_write_format): Unable to find a path from GSM to G729A WARNING[311316]: File codec_gsm.c, Line 136

Hello everyone! I tried to send a fax over SIP with an Asterisk Server in the middle (no Digium Cards, etc. installed, everything is SIP only, the PSTN-Gateway is external). Whenever I start sending a Fax to a PSTN destination, the Call gets answered and asterisk tries to build a native bridging: -- Attempting native bridge of SIP/sip.westend.com-082fd1b8 and SIP/xxx-3ef8 Then the following

Dear All, I just setup the Asterisk with E100P which it's no problem in Dial In but I have problem when outdial. The connection method is like this : E1 PRI <-SIGNAL-1-> MaxLink (PBX) <-SIGNAL-2-> E100P <-> Asterisk <--> SIP \-----> Analog PHone Now when I tried to dial out by SIP X-Lite on Windows, it shows me Connect, Trying,

Hello, I have problem to make SIP calls, i have asterisk + PC InterP4 + Digium TDM400P here is the content of the sip.conf: [SIP_PROVIDER] type=peer fromuser=testcomclient username=testcomclient secret=testr host=IP_SIP_PROVIDER ;dtmfmode=rfc2833 context=interne canreinvite=no ;allerid=Beer disallow=all allow=ulaw allow=gsm allow=g723.1 ; Asterisk only

Can anyone recommend a codec pack with G723 for use under Vista? I have G723 prompts (about 70 prompts totaling 1MB) needing to be converted to G711 uLaw. I tried Audacity but it doesn't have G723 codecs. I tired some google found adware free tools and websites with no success in converting G723. It does appear the old Cool Edit (now Adobe Audition 3.0 for $349USD) can do it -jason

This was submitted to the Dev list last week, but there was no response, and perhaps it wasn't the right group. I am developing an application in which I need asterisk to pass on an incoming call to a separate IVR server. The problem is that asterisk appears to hang up while the IVR is playing back a sequence of recorded voice and systhesized voice prompts. My setup is: Analog line

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 i fixed wrong capi.conf (there was [controller1] after [interfaces]) now capi.conf is: ; ; CAPI config ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=855285,859609 incomingmsn=* controller=1,2,3,4 softdtmf=0 accountcode= context=local ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1

My PBX seems to have just started showing wierd codec negotiation problems. I'm not all of a sudden getting this on certain phone numbers on my system: Feb 8 22:19:19 NOTICE[1125329728]: channel.c:1683 ast_set_read_format: Unable to find a path from ULAW to G729A Feb 8 22:19:19 NOTICE[1125329728]: channel.c:1650 ast_set_write_format: Unable to find a path from G729A to ULAW --

We are having many successes with Asterisk and starting to get the hang of it. But, I am still having problems getting my Budgetone BT100 (firmware 1.0.4.50) to work fully. I can receive calls, but cannot make them. We have the latest version of Asterisk, Fedora Core 3, Digium TDM400P with one FXO and one FXS card configured and working well. We have a PSTN line going into the Digium card,

Hi, Asterisk is new for me. I had a working configuration, but suddenly I can't call anymore with my voip provider. I am not aware that I changed anything in the configuration, but who knows. Can somebody explain me what is happening here? I changed username, password and number. -- Executing Dial("Zap/2-1",

Hi list, Just installed spandsp. In my limiting testing, I have an issue on a Philips fax machine (HFC21) directly connected to my * server through TDM400, reception with rxfax works fine, but txfax always fails. Below is a transcript of failed transmit. This is with asterisk-1.0.3 (with native moh patch but I don't think it is the source of the problem). I already tried libtiff 3.5.7,

Whenever I take an inbound call I am getting the following errors: NOTICE[4719]: channel.c:1698 ast_set_write_format: Unable to find a path from speex to gsm NOTICE[4719]: channel.c:1731 ast_set_read_format: Unable to find a path from gsm to speex What typically generates this issue? ~Dan

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

hi, all I have test echo application for just fun. I can'nt understand why this is used below in .c file, format = ast_best_codec(chan->nativeformats); ast_set_write_format(chan, format); ast_set_read_format(chan, format); without this this application work fine. then why this is used. any suggestion?? Bhrugu mehta