similar to: Strange warnings from chan_zap

hi guys, I have a little problem maybe you can help ... I have an asterisk setup, with an E100P, and an ISDN-PRI 30 channel line from the telco going into it .. the E1 line is OK, because plugged into a Lucent Portmaster 4 it works OK .. plugged into the asterisk box I just get an engaged tone, and asterisk posts this message on screen : WARNING[1167272000]: File chan_zap.c, Line 5275

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

Sorry Martin to bother you again! I have an ISDN flux with 100 numbers. The local PSTN is sending now the DNIS/DID (so they said!!!) (I have set the immediate=no in zapata.conf) but I have the same problem as before : NOTE : the number is alphanumeric-DID alphanumeric (I will make tests with numeric mumber!). WARNING[9226]: File chan_zap.c, Line 5275 (pri_fixup): Call specified, but not

What am I doing wrong here? Why is this happening? libpri is version 1.0.7-1 (debian package) asterisk is version 1.0.7.dfsg.1-2 (debian package) zaptel is version 1.0.9.2 -- Executing Dial("SIP/739-5935", "Zap/g1/0916000739") in new stack -- Called g1/0916000739 -- Channel 0/1, span 1 got hangup Oct 10 13:14:45 WARNING[7544]: app_dial.c:412 wait_for_answer:

hello all, i'm using TE110P and all configuration prosess is done. but after i do the 'modprobe' for zaptel and wcte11xp, follow by ztcfg -vv and asterisk -vvvgc i have this error. *CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too. May 27 14:44:34 WARNING[3059]: chan_zap.c:8534

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

I haven't seen anything about this is the archives, so here we go. Sorry, its a long one. My setup: Dual Xeon 2.4 GHz. One TE410P card. Span 1 populated with a PRI. Span's 2-4 empty. zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us I'm currently having a problem where one of our PRI channels seems to keep a call even after it is hung up. We have

I've got a system with 5 pri circuits configured into a CFAS group with a primary and secondary d channel. There are three TE410P cards in the system. The 5 circuit span are located as follows: circuit 1 on span 5 circuit 2 on span 1 circuit 3 on span 6 circuit 4 on span 2 circuit 5 on span 9 primary d chan is on chan 24 of span 5 (chan 120) secondary d chan is on chan 24 of span 1 (chan

I am getting: NOTICE[180235]: chan_zap.c:7358 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 on my asterisk box and it seems to be causing a poping sound in the phones, I am wondering if anyone can shed some light on this. I have scanned the archives and get possibilities ranging form motherboards, to pri, to loaded module problems. Can someone tell me the best way to start

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

Hi all, as good? I am trying to go up a board TE110P with link E1 ISDN PRI to establish connection with a central office Siemens HiPath 4000. But I am having the following errors: Server1:~ # asterisk -r Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'

I'm running an E400P. Every now and then Asterisk stops receiving incoming calls. This turns up in the messages log: Nov 25 10:49:12 WARNING[65541]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on span 1. Hanging up owner. Nov 25 10:49:15 WARNING[81926]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on

Hi I' ve just installed TE410P and asterisk-0.7.2 from tar.gz on fedora core 1. When i start asterisk it shows me this: /usr/lib/asterisk/modules/chan_zap.so: undefined symbol: ast_pickup_call Apr 19 16:52:32 WARNING[-1085304704]: loader.c:358 load_modules: Loading module chan_zap.so failed! Where do i look, how can i debug? Thanks in advance Jorge Verastegui G RedCetus S.R.L

I have a serious problem that repeats very often, after 30 - 50 calls and I can only solve it by stopped and restarting * :-( After a while, * seems to loose track of something. When an ISDN call from PBX needs to go to the Telco, I get 'Ring requested on unconfigured channel 255/255 span 2' It's always channel 255/255 ??, the 'span' number is random Setup: * between Local

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

Hi, For a significant time now (since about 0.2.0-rc8n) the qozap driver has become very verbose if an ISDN line is not connected... I get the messages below every couple of seconds in the asterisk logs. The "flaw" in the messages is the "Alarm cleared" message - The alarm cannot possibly be cleared because there is no physical media connected into that port!!! (BTW - All

Hello all, We have a situation where our 30 lines are maxing out, but no one is on a call. We are currently running CVS head downloaded on 15/8/2005 on a Dell Power Edge 2850. Our office mainly functions on a queue system. At the time this happened all our agents were logged in and no one was taking a call. Does anyone have a similar experience and ideas on how to fix this problem?

Since connecting a PRI to a Digium T100P, I have been seeing the following messages in syslog every few minutes: Jun 4 06:51:54 pbx asterisk[13435]: WARNING[1209214400]: chan_zap.c:6176 in zt_pri_error: PRI: Read on 56 failed: Unknown error 500 Jun 4 06:51:54 pbx asterisk[13435]: NOTICE[1209214400]: chan_zap.c:6913 in pri_dchannel: PRI got event: 8 on span 1 Sometimes, these messages come out

I thought this problem with PRI and channels getting out of sync was fixed in the 1.2.x release of Asterisk. Here are the errors: Jan 5 13:59:05 WARNING[1253]: chan_zap.c:8360 pri_dchannel: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. Jan 5 13:59:11 WARNING[1253]: chan_zap.c:8360 pri_dchannel: Ring requested on channel 0/2 already in use on span 1. Hanging up