similar to: Advantage of Cisco 7960 with 5.x firmware?

Hi all, I noticed yesterday that MOH doesn't seem to work any more on my SIP channels. It works fine on PSTN calls (chan_capi) but on SIP a just get a tiny burst of sound followed by silence. I know it was working a couple of weeks ago, and I haven't made any config changes, but I have updated from CVS a couple of times. Can anyone confirm this? Jamie Neil Versado I.T. Services Ltd.

Hi, I've managed to get X-Lite (v2 build 1050) working pretty well with *, but am having problems with the DTMF signalling. I've used inband signalling with no problems on the uncompressed codecs (G711), but obviously this doesn't work with the compressed ones (GSM). However when I try to use RFC 2833 it doesn't seem to pick up "0" properly. For example if I dial the

Hi, when I make a call, chan_capi always uses controller 2, and never uses controller 1 (so I have 4 lines for incoming calls, but only 2 lines instead of 4 for outgoing calls). this is with 2 AVM Fritz cards PCI. -- _______________________________ Simone Vasoli BK s.r.l. - Brain and Knowledge e-mail: simone.vasoli[at]b-k.it cell: +39 348 0830539 tel: 0187 1874200

Hi, I'm having a problem with DTMF tones from my SIP client apparently crashing the chan_capi driver. However I'm not sure whether this is a bug or misconfiguration on my part: if I set "softdtmf=1" in /etc/asterisk/capi.conf the problem goes away. Does the AVM B1 not support DTMF detection? The set up I have is using latest CVS (3 days old) running RH8 on a 933MHz P3. SIP

What have people found to be the ideal setup for recording asterisk prompts? I'm looking for both the ideal application to record them in, the ideal format, as well as hardware (do I need a fancy studio mic or will a headset mic work?). Thanks, Justin

We've been using SIP with Asterisk for a couple of years now, and it's generally worked fine. However we're now trying to use a more complicated codec setup, and I've hit a problem with how codecs are selected that I can't get around. For a simple configuration: XLite > GSM > Asterisk where GSM is the _only_ codec selected on XLite, and in sip.conf we have:

After creating a simple decoder for theora using liboggz i started profiling. As someone else stated in the lists the conversion from yuv 2 rgb takes a significant time. I decided to go on the way of SIMD not shaders because SIMD is supported on a wider range of computers. I managed to strip out the yuv 2 rgba conversion code from liboggplay but it seems i am missing something. It runs but the

I just inherited a server that has dual quad core Xeons and 16 gigs of RAM running RHEL5. When I started to kick the tires of the server I noticed the dom0 was the 32bit version of RHEL5. My question.. aside from being able to run full virtualization (for Windows and unmodified Linux domUs) is there any compelling reason to install the 64bit version of RHEL5 if I''m only going to run

Phil Karn wrote: > This works well, but then I noticed the SET_FORCE_CHANNELS option. Is > there any advantage to my detecting identical left and right channels > and setting this to force mono? Or does the Opus encoder already do this > internally in the AUTO mode? No, the automatic setting should be fine. The purpose of this setting is for the case where you know the receiver will

Here's another odd question I've been wondering about: Typically a class vtable is an represented as an array of function pointers. Now, since the functions all have different calling signatures, I imagine that you would generate an array of opaque pointers, and then bitcast the pointer to the actual function signature at the call site. However, that's not what I am doing.

Is there a way to run The WindowsGenuineAdvantage.exe? i tried it with Wine 0.9.29 and it crashed. What I really wanted to do was run the WindowsVistaAdvisor.msi, That proceeded and I got the .NET stuff downloaded and installed, but It wanted IE version 5.5 or something. I think if the fake IE stuff in Wine should have made that last step above unecessary? Any ideas? Thanks. NOTE: This is

> There is a bug with nss_ldap and bash32 ... I created a new RPM for the > nss_ldap that is currently in our testing repo. Johnny, I was wondering if that RPM includes the security fixes detailed in https://rhn.redhat.com/errata/RHSA-2008-0389.html Thanks in advance, M

I suppose a lot of it depends on your needs. For us, we run internal DNS servers for all the VMs we have running; mostly for software development and monitoring. It makes sense for us to do so as we have mostly Macs (and my Linux workstation) that work better using DNS. Had we been a mostly Windows shop, we'd likely use NetBIOS internally with some Dynamic DNS for win clients. We also have

On Mon, June 22, 2015 08:14, Timothy Murphy wrote: > What is the advantage, if any, of running one's own DNS server? > Surely the link between domain name and IP address > must already have been established? Response time. If one does not possess delegated authority for ones own forward zone or for the IP address block reverse zone, and thus must operate an authoritative server

On 2015-06-22, Timothy Murphy <gayleard at eircom.net> wrote: > What is the advantage, if any, of running one's own DNS server? > Surely the link between domain name and IP address must already have > been established? > As others have said, it depends on your circumstances and what you want to achieve. In my case I run dnsmasq on my home network, configured to use my

On 6/29/20 1:34 AM, d tbsky wrote: > what's the advantage of NetworkManager for server? The shortest clear answer I can give you is: In the event of a power loss, many servers will boot faster than the managed Ethernet switch they are attached to.? Systems managed by network-scripts may not set up their network because there is no carrier at the time that networks-scripts start up.

Hi all, are there any (dis)advantages in "connecting" dovecot and an MTA (in our case: exim) using LMTP over using other methods (e.g. the exim transports definitions that can be found in the wiki)? Thank you very much! Gruss/Regards, Christian Schmidt

I wish to know if someone knows an IMAP client (desktop or webmail) using Dovecot's virtual mailboxes as server-side search folders. Thanks.

Sat, 2 Aug 2014 06:53:58 -0400 Presently, I have: "virtual_transport = dovecot" in my Postfix main.cf file and dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/dovecot-lda -f ${sender} -d ${recipient} in the master.cf file. Is there any advantage to using LMPT instead? All of my users are configured as virtual

Diburim [diburim@hotmail.com] writes: (Quoted from the subject line - Diburim, it's best to keep the subject line short and put your question in the body of the e-mail. Subject lines are often truncated for display purposes and it can make it more difficult to see your question) > On Windows OS, is there any advantage for completing rsync using > MSVC instead of gcc/cygwin ? Not