similar to: telantek.adsi

I just received an unlocked ADSI phone and I am playing with the ADSI script. I was wondering how I can include Voicemail functions (Check new messages, Delete message) into the soft buttons. I checked in app_voicemail.c and it looks like these functions have already been programmed. Is there a voicemail.adsi script somewhere? If not, then how do I get the functions I want onto my phone? Thank

I recently set up Asterisk with an Adtran TA750. All is well except the phones do not show the MWI. I have configured zapata.conf properly, as all phones will receive a stutter dial tone if there is a message waiting in it's assigned mailbox. Does anybody know how I might fix this problem? Thank you for your time __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free,

I have just received a T100P and an Adtran TSU 600 in the mail. I seem to be having a problem with the T100P card. So far I have done the following: vi zaptel.conf fxoks=1-22 fxsks=23-24 ... vi zapata.conf ... signalling=fxo_ks ... channel => 1-22 ... signalling=fxs_ks ... channel => 23-24 I then run modprobe zaptel modprobe wct1xxp ztcfg -vv There are no errors to report. In

Has anyone solved the problem on the ADSI phones that when you hit one of the soft keys, the Number Pad stops working?

Is there any way to program a soft key in ADSI to put a caller on hold. Then able to retreive that caller. Example - Softkey Hold Softkey Retreive Call Softkey End Call -gcc

I have ADSI working on my Aastra (Vista/Nortel) 350 phone and everything is working fine. However, I want the asterisk.adsi to load into the 'self-load' slot but can't figure out what the correct FDN for doing this is. Does anyone know the right FDN for the SL slot on these phones? Also, does anyone have any cool/interesting ADSI scripts they wouldn't mind sharing? I'm

I have an Aastra 390 ADSI phone. It's not locked. I can call ADSIProg without a problem and it programs my phone. Calling Voicemail2 also programs my phone. However, in order for the VMail option to appear on the screen I have to go into the Services menu, pick Asterisk PBX and pick Select. Then the VMail softbutton appears on the screen, but any time I make a call it goes back to the

Hey Everybody, You may remember be as the one that was generally running in circles trying to get ADSI phones to work? Well, five phones later, I've got a phone and a code that works to program it. I have been discouraged from just posting it to an e-mail forum, but I have been encouraged to get it embedded in the program. Is this possible? How should it be done? Next, after getting it

Can anyone recommend some phone sets that are adsi compliant and work well with asterisk?

There isn't much documentation on adsi, but I called NETXUSA (the vendor of my 480e) and they helped me along. My experience: 1. I really had no experience with ADSI so I had (probably still have) some misconceptions on how the configuration is loaded onto the phone. 2. I set the following in my /etc/asterisk/asterisk.adsi (most of this is the stock asterisk.adsi script): ;

Does anyone know where I can get a list of ADSI functions.. Example *70 (No Call Waiting), Flash = Flash, Hold = ??? Thank you, -gcc

I know I heard people looking for inexpensive ADSI phones a while back. Can't vouch for these guys, but this looks like a reasonable deal for what perhaps are new phones. No experience with ADSI, myself, but thought I'd pass it along. These folks also carry the Nortel analog units that do intercom and 2-line, as has been discussed in prior threads. JT ---------------------

I just need to buy 5-6 ADSI Phones. I wondering which of these models to choose - aastra 390 - I don't know is this an ADSI phone at all. Is there versions with and without ADSI - aastra 350 - I'm sure that it have ADSI. If there is some other good working model, it will be great, if someone points me. Thanks

I keep getting segmentation faults when I do a reload. Here are the core file outputs from gdb: (I have three of them and they produce the same output) (gdb) core core.6044 Core was generated by `asterisk'. Program terminated with signal 11, Segmentation fault. #0 0x401519fc in ?? () I have no idea what that means, but if somebody could point me in the right direction, that would be

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

Wondering, since they appear to be plentiful on eBay, whether I could get a Nortel 350 to use to learn my way around ADSI. The vendor claims that these are "generic," and looking through the archives I wonder if that means that they might be unlocked in the sense that the word is meaningful to asterisk. Of course I am green as could be on this topic, so this question may even be a

I'm trying to work out whether I want an ADSI phone or not, and in fact, whether it is ... useful/works with Asterisk. I have decided that for the cost/performance of the various IP based phones, I am not interested, I seem to get significantly better quality from a plain analogue phone using the TDM40B card. Is it beneficial to get an ADSI phone as opposed to a plain old analogue phone from

Hello list, I have reason to believe that ADSI can be spoken to phones even when they're onhook. Is this true? Does anyone know? Right now, I'm having trouble figuring out how to do anything to an onhook channel other than ring it. Does this require a magic application and some serious voodoo? Any pointers? I got onto this idea because I noticed that whenever I got voice mail on a

Hi, When I try to run the command wmix to mix two WAV files recorded by the Monitor application I get the following warning in the console and the macro exit at that point. Running the command from a standard system console it works. More, even from this macro it works and produce a valid mixed file, but still get that error and the macro cannot continue. Why? I have tried even with a simple

Hi, Would anyone know of a way to set the time automatically on an ADSI capable phone from *? The phone in question is a Aastra 480e. While I am at it, does anyone have any helpful docs on the ADSI script programming? I have managed to do basic functions by modifying the asterisk.adsi file using stuff gleaned from the app_adsiprog.c file, but docs would be really helpful at this point. Tia,