similar to: Voicetronix V4PCI

I am really struggling getting Asterisk up and running utilizing these two cards. Has anyone had success with this combination? If so, would you be ever so kind to submit sample vpb.conf,zaptel.conf,zapata.conf and extension.conf files??? With great thanks, Ronald R. McDaniel Southern Computer Services, Inc. rmcdaniel@southerncomp.net (251) 444-3136 office (251) 446-3137 fax (251)

Hi. I need help with my brand new Voicetronix OpenLine4 board that I installed into Asterisk. After building the Linux device driver and inserting the module, I modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the US settings and comment out the Austrailian ones. I made the appropriate entries for routing in vpb.conf and extensions.conf.... All appears to be well, except

Hello all - I'm trying to get Asterisk working with an Openswitch/6 card with all ports set to FXO for PSTN in/out, and 10 SIP phones on the LAN with the Asterisk server. The SIP phones are working properly to dial one another, but I can't seem to get a call to go out to the PSTN through the voicetronix, and I similarly can't get incoming calls to the lines hooked up to the

Hello all, I hope this is not off-topic, if it is please let me know. I'm currently playing with an Asterisk at home, in order to get to know it's ins and outs. Very very impressive indeed. I've got it hooked up to my home phone line via a Wildcard clone board (Intel modem with Ambient chipset), and it works like a charm. Zaptel picks up the card as a generic clone, and works with it

Has anyone gotten the voicetronix boards to work with Asterisk, what would it take? Or does anyone know where I can get 4 ports or more fxs PCI cards that do work with asterisk? Brian J. Schrock Network Engineer, RHCE, CCNA Anistone Technologies Phone: 614-798-9106 FAX: 614-573-7165 6926 Avery Rd. Dublin, OH 43017

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12

One of the suggestions I got for dealing with my analog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

G'day, First off, I'm not subscribed to the list, so if there are any responses that should be directed to me, feel free to CC me in :) The below url is an updated patch of Professor Tom's earlier SRP patches for SSH. The only things changed was so that it would compile on a newer openssh version. For more information regarding SRP, see http://srp.stanford.edu This isn't

I'm using a Voicetronix OpenSwitch12 with Asterisk. I need the ability to hook-flash a channel while a caller is on the line so I can transfer a call through a PBX. I need the equivalent of the FLASH() application, which only works with Zap channels. Does anyone know how I can hook-flash then send DTMF on a vpb channel? Rodney Hassell -------------- next part -------------- An HTML

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

Hi All, I recently installed and compiled Asterisk in a Red Had (enterprise) box with digium TDM400P card installed in it. Thanks to the good documentation available, I was able to install and configure the hardware as well as software. As specified in the Getting Started with Asterisk Guide, I first installed zaptel driver, then libpri and finally Asterisk. All of them successfully compiled, but

///shameless advert/// I have just listed my two 4 channel voicetronix cards on ebay if anyone is interested. The cards work great but we have now moved to E1 so can no longer use analogue cards so have moved over to asterisk running on digium hardware. Items no 2745081372 and 2745081930 I'm not sure of the current state of the voicetronix driver for asterisk but these cards were from my

Hi there, Besides the problem of Voicetronix dialing too early before the carrier gives a dial tone, there also appears to be issues with the audio quality when more than 1 channel is utilized.

Before I start ... I know there's been a lot of talk over the last couple of days about the list being slow etc... I understand there were problems and that mail is starting to get through now. Just wondering - should I be surprised if something I sent 48 hours ago hasn't turned up at all? And something I sent about 6 hours ago still hasn't turned up (yet). I'm just curious

In my search for a better analog FXO interface, I'm looking into the Voicetronix cards. Can someone let me know if they've been using the OpenSwitch cards with Asterisk? Also, can anybody comment on the differences in FXO performance between the OpenCall and OpenSwitch cards? Thanks in advance, Paul -- Paul A. Dugas Dugas Enterprises, LLC email:

Any one has documented how-tos for making voicetronix openline 4 to work with Asterisk. I have been contacting Australian Digium resellers and Digium cards are not approved in Australia. So I suppose Australian users are interested into putting Voicetronix in use. Any expereience to share will be most appreciated. David Kwok -------------- next part -------------- A non-text attachment was

hi there, i've been able to successfully run asterisk with the Voicetronix OpenLine4 card, it can accept calls and function normally. The only problem I'm experiencing so far is getting the card to outdial to a third party. What I'm trying to achieve is basically call bridging, where the caller dials in to asterisk, some IVR plays and then attempts to perform a "transfer"

Hi, Firstly it appears you are not passing the extension to be dialed to the Dial command, so the driver is dialing badly. It should be something like dial(vpb/1-2/102) since this is a line port. Admittedly the driver needs to check better that the number it is trying to dial is legit but it doesn't :) P. --- You Wrote --- From: "Jacky" <jacky.taiwan@msa.hinet.net>

I'm looking to use Asterisk to replace my current PBX system. I'm in Australia so I need to use Austel approved equipment. My plan is roughly as follows: - Get a box with a suitable card and install Asterisk - Connect our existing PSTN lines to the Asterisk box - Get suitable softphones/ip phones to connect to the Asterisk system - Route all intra-office calls over our VPN - Route all