similar to: SIP QUESTION

toy buy my first cisco 186 but when i read this page http://www.djernes.org/~shawn/ata186.htm i cant find in my dev page some parameters just like " UseSIP " what i need to do to show this parameters Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030626/42e66005/attachment.htm

Hi, I'm away at a conference in Amsterdam. My home is in Cambridge in the UK. On a whim, I tossed an ATA186 and a phone into my bags before leaving home. I was able to plug my ATA186 into a LAN here at the conference and was connected to my home Asterisk in a few seconds. Total time from unzipping my bag to talking to home no more than 15 seconds. OK, so the kit could be more portable,

When i make a call using oh323 channels, how i can send a ringing sounds to indicate to the users that the call is in progress thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030623/95bfcc74/attachment.htm

From: Jorge D Cisneros <jorge.cisneros at hp.com> Problem: The actual code only check for entries with kernel or linux, so this example will not work, this patch is to add support to gfxboot to detect the entry COM32 and use any module, in this case the module is chain.c32 Version: Syslinux 4.04 Example: UI gfxboot.c32 LABEL boot_hd0 MENU LABEL Boot from first hard drive COM32 chain.c32

Hi I have a brand new ATA186 with the following firmware: Version: v2.15.ms ata186 (Build 020919a) I have been through the archives about how to configure it, but my colorful configuration web page does not have the same fields that people say I need to adjust. Even the examples on Cisco's web site don;t match. For example, I don't have the GtkOrProxy field, which is an important

Guess who's here to do an Asterisk demo this week without the power supply for his SPA-841. I have an ATA186 with me. Both phones use a 5v supply. Does anyone know whether the supplies are interchangeable? Thanks in advance; sorry for the noise. B.

-----BEGIN PGP SIGNED MESSAGE----- Greetings, I've just about got Asterisk up and running and am wondering the following. Currently, I subscribe to both Vonage and Broadvoice and as such, I've got a Sipura and Cisco ATA186. Although I'm sure this is expressly prohibited somewhere in my service agreements, can I reprogram these devices to access my own asterisk server rather than

Hi All, I'm looking at getting some Cisco VoIP hardware to play with in combination with a Asterisk server. I've heard that there is beta software available to do SIP on the 7905G. So, I'm thinking of either getting a 7905G or a ATA186. My dillema is, which one to buy? I can get both for about the same price, has anyone had any experience with using a 7905G with Asterisk? On

I've been trying to use net2phone's sip service at sip.net2phone.com with * but keep getting SIP/2.0 401 Unauthorized. Do you know if this should be possible? So far: I can use an ata186 to connected directly to n2p through sip.net2phone.com without any special settings. I can connect from * to iconnecthere, but, whatever I try from * to n2p produces "SIP/2.0 401 Unauthorized"

Hello Everyone - Well, I think I'm getting closer with the asterisk connection. This is my setup and I keep getting this error below in ,my /var/log/asterisk/messages file. I have opened 5060 port on the firewall box. I would this is Warning which I can ignore! But I see the connetcion coming but NO DIAL TONE on mt ata186 box sitting in my 192.168.200.x site! I'm using ATA186(cisco

Hi all: I'm testing a new installation of *, bringing up some ATA186. In * environment, all stuff works greats. The only thing that don't work is a Call Transfer, but the 3Party works ok. Some time ago I read that somebody had proven this functionality successfully. If somebody knows what I missing, please let me know. Thanks in advance, Gus -------------- next part -------------- An

I am trying to do a "factory reset" of an ATA186 using the widely-available instructions (basically dialing "FACTRESET#" on the keypad while at the menu prompt). I have done this a number of times before with success, but on this unit the lady spells out "P A S S W D" when I finish up the entry. Does anyone know what to do next? Hitting the star key (which is

I have an Asterisk server that I use at work. I have a phone that is at home that logs into the Asterisk server at work. My home phone is hooked up via DSL through a Linksys router. You can see the my sip.conf for the phone blow. The problem is each time the phone rings I can hear/be heard 50% of the time. Any suggestion on what to look for. I do have my reg time set for 180 seconds on the

Is there anyway to turn off the call waiting beep in the grandstream and/or cisco ata186? I have a dial statement in my extensions.conf that rings 5 phones at the same time by combining them with the & in the dial statement. i.e.) exten => blah,blah,Dial(SIP/GS1&SIP/GS2&SIP/GS3&SIP/ata186a&SIP/ata186b,25,t) If one of those lines is being used, then the user gets a really

I really should be doing something better on this beautiful weekend, but I'm trying to save myself some time for later projects by documenting some things that have been particularly troublesome in the past. That being said... I've written up a configuration guide for the Cisco ATA-186, which describes some of the features that are possible to set in the ATA and specifically what

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Hi, I'm having trouble getting caller*id to appear on my phone connected to an ATA186, and being called from Asterisk. Does anyone out there successfully see callerid on their ata186-connected phone? The "From:" header in the INVITE to the ATA seems to have the "right stuff" - eg From: "Study phone" <sip:6002@195.217.255.45:5062>;tag=as412db061 But

Hi, I saw your posting about the cisco ata186 I2 vs I1 and the simple vs complex impedance. I ordered a cisco ata186 i2 for use in Canada by mistake, didn't know that I needed the I1 version. Will the I2 version work in Canada with regular anlog phones, or will I need to change it. Thanks for your answer. Samy -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, We are using asterisk 0.4.0 on debian sid with Cisco 7960 and ATA186 phones. All sip entries have: callgroup=1 pickupgroup=1 However I am unable to remotely pickup a ringing phone using *8#. I get fast busy tone. Is there some flag to add in extensions.conf ? Thanks in advance,

I dont have a cisco acount yet can some bady hel me with the ata18x-v2-16-030401a-1.zip file. thanks in advance Rodney Acosta Coya. Dpto. Tecnologia de la Informacion. racosta@moanickel.com.cu Tel:(53)(24) 62 611 -----Mensaje original----- De: Paul Rodan [mailto:asterisk@glitch.cc] Enviado el: Martes, 23 de Noviembre de 2004 11:24 a.m. Para: 'Asterisk Users Mailing List - Non-Commercial