similar to: CallerID, DECT phones and ATA

I've got the following setup: IAXy -> Dect Base Station. When you dial from a SIP phone (cisco 7960), the rings with very little delay. However, if you hangup it takes 3-4 rings after hanging up before the dect base station phone stops ringing. The same applies when an incoming call is directed from PSTN FXO -> Dect Base. Is there a fix to this I've looked about on voip-info but

I have a TDM400 with 2 FXS cards, and a Samsung 6100 DECT base station connected to one of the ports. The base station appears to only support UK (BT) style CLIP Caller ID signalling. Does anyone know if it is possible to configure the ZAP channel to send in this format, or alternatively can you recommend a GAP compatible base station which will handle both BT and Bellcore signalling? A search

Dear all, I am happy to tell you that I received a Digium's TDM20B card for my Asterisk box today. but the phone jack is RJ45 instead of RJ11. So Please I need precise instructions to connect a phone to this card. please, assume that I have a phone (a normal analouge phone connected to the one end of a cable with an RJ11 jack (at the phone side). and now I want to connect the other end to the

Anyone have practical experience using inexpensive GAP-compliant DECT handsets with the Snom M3 basestation? When I asked Snom support, the answer was that 'basic functionality should work', but they didn't elaborate. I'm _guessing_ that means registering/unregistering with the base, making calls, and receiving calls (including presenting caller ID). They also stated that they

Hi all, I am going to have a TDM20B FXS card and sit in it in my Asterisk box, I need out going calls only. I am quite a newbei of it, I hope your tips and tricks with valuable links. Thank you Kumara

We've deoplyed a number of pure VoIP wireless (wifi & proprietary) phones, but not dect. Is there a simple overview of integrating DECT phones with Asterisk somewhere? I assume the DECT basestation has a multi-account SIP VoIP interface, and the handsets are just plain old dect? Can you push configuration info to individual phones? (Are they individually addressible / configurable

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

I am trying to find an example of how to set up my FXS Station Card in my Asterisk. I have (1) XP100P I have (1) tdm20B (2 Port FXS) Could someone tell me if this is correct? /etc/zaptel.conf fxsks=1 fxoks=2 fxoks=3 loadzone=us defaultzone=us /etc/asterisk/zapata.conf [channels] ; language=en ; ;X100P Port 1 context=inbound-analog signalling=fxs_ks usecallerid=yes echocancel=yes

I have posted this to the Asterisk Forums, but got no response yet. Sorry if you are reading this for the second time. What fax hardware do I need for a T1? Ideally, I will switch my T1 to a digital PRI (not CAS I'm told, which is not as good) coming into the building. My CLEC said I can do this switch no problem. I have an analog T1 coming in now. >From the Asterisk box, I will connect

Hello, I need to setup this configuration: - asterisk as IVR; - dect phones. So basically I need a "standard set" of features: - each dect phone has its extension so I can call it directly; - handover of a call with "R" key; - if a call is not replied by someone ring all phones. I have little budget. I can choose to buy a fritz!box or a gigasect dect/ip base station. Which

Hello, I need to setup system of aroud 60 DECT phones with asterisk. So far I found http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-ip-phones/dp715_710 However is there some cheap base station(similar to GSM cell) so I can handle all DECT phones centralized and plug it inside asterisk ? Thanks, Peter

Hi all, I'm looking for a PCI card which i could install on asterisk box, with purpose to use 15-20 cordless dect phone in a very "dect cell". Is there anyone that could help me pls ? Thanks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Do you if a DECT-GAP (or DECT-CAP) compliant handset MUST or MAY support roaming and handover and are these functions transparent for handset (then, these functions are implemented in DECT base stations) ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080110/4254f602/attachment.htm

Hi I have a problem with a new DECT phone I have bought The key pad works like a Mobile phone where you dial first then pick up the line, but it seems to dail too fast or spuriously, ie 012826736464 show on thew Asterisk console as 0012282677, could any one offer advice how to fix? Also when doing a ZAP bridge to this phone from an outside line the call is very echoy, but not an internal

Hello. Is anyone aware of a manufacturer of DECT cordless phone interface cards to act as the DECT base station that would be addressable channels under * ? Regards Petar -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040418/c8885bbc/attachment.htm

Hello, I have been experiencing audio problems when accessing the Voicemail application using DECT phones and the g729 codec. The issue is that whereas the vm-password is always played correctly by the DECT phone, the rest of audio files, randomly, are played or not by the DECT phone. Everything works correctly if another codec (alaw,ulaw) is used. I have noticed that asterisk doesn't send

Hi folks, The recent mention of DECT on this list has got me thinking....... (yeah dangerours!) I have very little experience/knowledge with DECT and mainly where I have seen it used in a multibase base situation where handoff between bases occurr. This has been and ericsson system used as an adjuct to an ericsson pbx on a large multistorey property. If I remember correctly the bases are fed 2

Hello, Does anybody have already use TEDAS VoIP DECT PABX or some Kirk hardware to integrate DECT to VoIP? Thanks! Ignace

Off topic but I am after a DECT phone to connect to my sipura 3000 that has a FSK VMWI light or flashing envelope on the LCD screen. Any ideas Chris

I've received my Com-on-Air DECT card this morning and while I have configured it (both the DECT registration and SIP to Asterisk configuration), I am running into a "Call missing Call ID from" error message. I can call from a DECT handset to an extension, but not the reverse. Not being an expert, it seems to me that Asterisk is looking for a CallerID from the DECT card. I