similar to: IAX and Speex?

Hello list, I've got a problem (maybe only a problem of understanding how * works) with IAX and WaitExten. To simplify the problem I've brought it down to the following scenario: - 3 Asterisk Server A,B and C (central). - A and B both register with C. Now I want to be able to dial an extension at A to become connected to C and there I want to dial an extension to become connected to B.

Hi All - Well, after happily existing in a one office environment with asterisk for a few months, I've now decided to start adding in our other offices with their own * boxes and IAX connections (over VPN). Unfortunately, I'm an idiot and I can't get it to work. I'm having some kind of problem with codecs, I guess, but I don't understand what or why. When trying to use

Hi - I'm running CVS-HEAD from 2005-08-11 20:17:17 UTC, and I'm trying to set up some redundancy on IAX connections between locations. I have two IAX peers set up that work correctly by themselves: "ast551-out" and "ast551-out-backup": [ast551-out] type=peer secret=secret username=ast551 host=X.X.X.X qualify=1000 disallow=all allow=gsm allow=ulaw trunk=no

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call

Hi, I am a newbie in asterisk. trying to configure firefly third party edition to connect to aserisk 1.0.3 im able to authenticate but cannot dial extensions. I have been reading the documentation cant seem to find the correct configs. Attached the error message and configs. What am I missing? *CLI> Urgent handler Feb 12 15:52:05 NOTICE[16537]: chan_iax2.c:5718 socket_read: Rejected connect

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

Hello! I have a number of IAX clients behind a NAT (on the same LAN) and asterisk server on the Internet. And that clients doesn't speak directly to each other, traffic goes through the asterisk server. What should I configure to make IAX clients on the same LAN to speak directly, please? notraster=no is set in iax.conf The asterisk server is on real IP behind a NAT (at DMZ with full 1-to-1

I am having some problems getting TelIax service to work with *. Outbound calls work just fine. When I try an inbound call the phone rings and there is no audio. Upon further investigation "iax2 show channels" indicates that the codec is "unknown" The provider confirmed that they are set for ulaw and so am I. Does anyone have an idea what could be causing the codecs to

Hello, I have a 3 server asterisk configuration where one asterisk (say A) (v 1.4.25) has a digiuim card connected to E1 from which calls are routed to another asterisk server (B) (1.6.0.9) over IAX trunk from which calls get routed to third server (C) (1.6.0.9) again via IAX trunk. SIP clients are connected to third server. A is the PSTN termination server, B runs the menu and AGI and C is

Has something changed in the recent modifications to Asterisk that would break dialing of the IAX peer? We're getting these authority failures everywhere. Everything is configured just the way it was half a year ago, this is the message we're getting on the most recent vers of asterisk. Wiki says nothing, nor does the ast-dev list.. -lost Mar 18 12:55:23 NOTICE[3479]: chan_iax2.c:6545

I have 2 asterisk boxes: asterisk-alpha (running 1.0.3) and dev-asterisk (running latest CVS). I am the only SIP user on dev, everyone else in the office is on alpha. If someone dials my extension, it should go IAX to the dev server and the dev server should ring me. Here is what I see on the dev machine's console: -- Accepting AUTHENTICATED call from 192.168.1.25, requested format = 256,

HI ALL. Please help. Problem: video calls drop after 15-20 seconds all the time. Use * latest cvs. from sip.conf [1102] type=friend username=1102 host=dynamic callerid=Veo webcam<1102> canreinvite=no disallow=all allow=gsm ;allow=ulaw allow=h261 allow=h263 from iax.conf [peer2] ; 192.168.0.7 type=friend port=4569 auth=md5 secret=second2 context=local host=dynamic qualify=yes trunk=yes

Hi, I have a problem with IAX accounts... I set up a few months ago an Asterisk server, with mysql support to load iax accounts. Settings seems fine because apparently the system works as expected. Yesterday I tried to add another iax account in the iax.conf directly. And I have a problem with this new account (named 444). I can authenticate from 444 to the server, and I can receive calls from

I didn't know how else to caption this. I'm trying to play around with codec pass-through. I have two SIP phones, both with g729, behind two Asterisk servers. I set all the configs, SIP and IAX, to "disallow=all; allow=g729" on both servers. But the originating server won't even try to call the destination server: -- Executing Dial("SIP/btel-c7d7",

Hi all, I'm a newbie and I have a configuration problem with Asterisk. Seems that I'm not able to call an outbound number. I'm quite sure that it is a configuration problem, but I'm not able to find out where is the mistake, even reading several docs to www.voip-info.org. I do not have a good knowledge of Asterisk, I'm not very familiar with its configuration and I've a

I'm testing a few IAX trunk scenarios in a controlled lab. From server2 extension 5000 (Server IP Address 172.16.200.212) I dial 6001 which goes across the IAX trunk to server 1 (IP address 172.16.200.210). Instead of ringing the 6001 phone, it plays tt-weasels (the s extension). When I dial 6099 it also plays tt-weasels as it's supposed to, but it's not the tt-weasels under its

Hi, at my Asterisk box, I have a few of IAX2 phones (configured with alaw/ulaw/gsm codecs, in this order) and a PRI E1 line. In iax.conf I hav: disallow=all allow=alaw allow=ulaw allow=gsm During some incoming call, I read at console: -- Executing Dial("Zap/2-1", "IAX2/215|20|TtwW") in new stack -- Called 215 -- Call accepted by 10.97.1.7 (format ulaw) --

Hi All, I'm having problem with IAX, I'm trying to connect to speex.co.il from asterisk using: register => username:password@speex.dyndns.org and I cant get it to work. Maybe someone who already got this to work will help... When dialing my speex extension I see the next output from consol: IAX2 Debugging Enabled *CLI> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno:

Hi All, Sorry if this has been covered in the past; I've tried searching the archives, but haven't had any luck finding a similar problem. Basically I have problems when using IAX2 (which I now understand is just IAX). I have three IAX connections setup - VoicePulse, IAXtel, and an Asterisk IAX<->PSTN termination provider here in Sydney (ATP) If I try to use the CVS STABLE version

I've asked this before but I don't recall seeing anyone respond. Maybe the answer is so simple that it should jump right out, but its not. I've got three iax connections defined, two working fine (including one to iaxtel), and one that is somewhat intermitant. If I do a cli 'iax show registry' and 'iax2 show registry' I see "both" iax and iax2