similar to: Important: PSTN access-number for Dutch gateway changed

Yo all, I have a problem with a Dutch (KPN) PSTN-line, connected to an X100P. The call wil sound OK at first, but after 10-20 minutes, the audio will start to crackle. Soon after that, this crackle turns into a continuous noise and the parties won't be able to hear eachother anymore. It also sometimes happens that the party on the TDM400P hears a very loud, short-delay echo of themselves,

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

Hey all, As there seem to be some problems with DTMF-signalling between chan_sip and several clients, due to which many could not properly dial a number at the dial-tone of the XS4ALL-gateway at FWD-number "42442", I've now arranged for a prefix on FWD for this gateway.

Hi all! I am in the same situation here in Sweden, but I just got the X100 card and don t get it to work with DTMF caller ID. Is the only way to solve this to buy a TDM400 card w FXO modules? Is it just a driver question or a HW issue with the X100 card? Where to find dok about the new keywords in conf files like "cidstart=polarity" in zapata.conf? rgds Gunnar >>>

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

On Sun, Aug 17, 2003 at 03:44:21AM -0500, Gnophone Support wrote: > Hello, and thank you for registering at gnophone.com. Your login > information is listed below: > > Username: miernik > Password: ******* > IAX Phone Number: 17002916107 > > Please login as soon as possible to > http://x.linux-support.net/directory/ to complete the

hello everybody well...while trying to make gnophone to gnophone call using IAXtel's PBX server......i am not being able to establish a connetion.... possibly whats happening is, we are not being able to transmit our message packets properly and result is its not being able to establish connection n is resending frmaes again and gain here is message we are getting Tx-Frame Retry[000]

Ok I know that I am new user and would like some information on how to register to use IAXTEL. I looked at the gnophone web but it does not tell me how to register or where! Yes I am very new to Asterisk and Linux so please help. I did a google on this and kept sending back to the main site IAXTEL but I feel lost! Also can someone explain what top posting is? I don't want to do this on your

Hi, I read a lot about US providers that can terminate a PSTN number for you and offer IAX or SIP connectivity. Does anyone know such a company in The Netherlands ? I read about Unet. Anyone with experience with them ? Any information is welcome. -- Michiel van Baak http://lunteren.vanbaak.info michiel@vanbaak.info GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D

I hope this isn't something newbiesque and Steve will denigrate me. . . I just built gnophone, and I'm having trouble figuring out just how to sync the "Telephony Preferences" in gnophone and iax.conf on my asterisk server. I am heading on a trip and I'm pretty sure I'm going to be behind a NAT gateway, and my asterisk server is *separately* behind a NAT gateway. I

I am trying to setup a simple pstn gateway using Asterisk and a X100p card. I have got everything installed using Redhat 9 and am able to load Asterisk. I also configured sip and I am able to connect to the asterisk gateway with Xlite on the windows side. I am able to dial 1000 and get the welcome message. What I am NOT able to do is dial a seven digit local or 10 digit long distance number and

Has anyone tried installing * on a box with two eth interfaces which is acting as a NAT box? I have only one IP at this point and I would like to get * working without all of the NAT issues. My idea is to run * on my gateway (which is also running the firewall and masquerade services). All of my UAs (Grandstream + Xten X-LITE + gnophone) will be inside the NAT screen, and will connect to the *

Hello, trying to get gnophone to fully function under RH9 and finally have the browser working from the rpm from 2001. Turns out I had to get an old Mozilla 1.2 version and alter the startup gnophone script to point to it (MOZILLA_FIVE_HOME and LD_LIBRARY_PATH). How much better is the CVS stuff? I cvs checked out the gnophone and the Changelog only shows a comment about 0.2.5 but no real changes.

I have an Asterisk 0.4.0 install working with two grandstream budgetone 100 phones, gnophone, and kphone. This is a private network segment (172.17.x.x), with the PBX configured on my outbound firewall which has a public address (66.x.x.x). - I can make calls between phones - all extensions are working. - I can make IAX calls to IAXTEL. No problems (apparently gsm only) - I can call SIP phone

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the

Package: xen-api Severity: wishlist Tags: patch l10n Hello, Attached is the Dutch translation of the xen-api debconf templates. Please include it in your next upload. Regards, -- Jeroen Schot -------------- next part -------------- # Dutch translation of xen-api debconf templates. # Copyright (C) 2012 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the

I have tried for over a month off and on to get iaxtel for inbound to work... and tonight after alot of troubleshooting we noticed this: iaxtel inbound will use the last entry in your iax.conf to auth against. So if [iaxtel] is at the top and say [voicepulse] at the bottom. An inbound call will try to auth against that [voicepulse] entry even with the [iaxtel] entry at the top of the file. Has

I am having a really hard time getting gnophone working with asterisk. Gnophone tries to register with my server but there is no response. I can direct incoming calls to gnophone but if gnophone answers them, asterisk does not recognize it. Here is my configuration: iax.conf [jambo] type=user host=dynamic defaultip=136.159.99.100 permit=136.159.99.100 username=jambo secret=fubar

Hi all, I installed all needed RPMs by GnoPhone to be installed without problems but when attempting to install GnoPhone itself I get this message: # rpm -Uvh gnophone-0.2.4-1.i386.rpm error: Failed dependencies: mozilla >= 0.9.2 is needed by gnophone-0.2.4-1 libgtkembedmoz.so is needed by gnophone-0.2.4-1 libgtksuperwin.so is needed by gnophone-0.2.4-1 I'm using

Check this out! Finalist IT Group is about to participate in the Development Tools 2006 contest on 23 en 24 February with two teams. One of those teams is a /Ruby-on-Rails team/. Development Tools 2006 (formerly known as RAD Race), is not just a contest for developing applications as fast as you can. It''s also a serious showcase, evaluation and analysis of the development tools that