similar to: Dialogic pricing & Natural Micro-systems support

Speaking as former Dialogic/Bayonne user who was frustrated for months with Dialogic's complexity and months of initial testing with GlobalCall only to use their many-years-old and very complex base Dialogic drivers(and eventually scrapping it all for Digium/Asterisk and being up one week later), I can tell you that Digium/Asterisk is definately the way to go. It is 1000 times easier to

I'm pleased to announce the availability of CHAN_NMS - channel driver for NMS Communications (now Dialogic) hardware. The attached README explains it all. The project website is http://chan-nms.hosting.lv/ CHAN_NMS is an Asterisk PBX channel driver that supports NMS Communications [1] (acquired by Dialogic [2]) Open Access line of products, that includes E1/T1 boards [3] for PCI(-X), PCIe,

Hi All, I was wondering, in my effort to show how Asterisk can replace Call Manager, if there is support for call transfers/forwarding from the users Cisco 7940 SIP phone to either another SIP client or through the AS5300 on to the PSTN. I do see some stuff in the docs but seems to be specific to a local PRI board in the PC of which I don't have. Any experiences/comments most appreciated.

We have (10) Dialogic D/240SC-T1 REV 2 voice boards. Prefer single buyer, take all (10) for $675/ea Cory Andrews ***************** b2 Technologies 454 Sonwill Drive Buffalo, NY 14225 ***************** voice: 866-44-B2TECH X22 fax: 716.630.1548 email: sales@b2llc.com

I've been reading up on the SIP and related (SDP/RTP) RFC's and as I would expect the RTP session should ideally be between the two end points of the call, in my case the AS5300 and the 7940 which are connected on the same VLAN as the Asterisk server. When I sniff the packets on the VLAN I find that all RTP packets are being relayed by the Asterisk server causing increased load on the

All, Has anyone had any thoughts/discussion on providing a malicious call trace feature within Asterisk. Most legacy PBX's support this feature which allows a handset user to indicate using DTMF during a call that it's a malicious call which instructs the PBX to send a specific Q931 message over the ISDN to the providers switch telling it to log the call details as malicious for later

Hi All, I have checked the supported hardware list of boards that will work with Asterisk. What I am curious about is whether or not I need to have the Dialogic software installed and loaded before I launch Asterisk. Thanks. Jim

Can someone share pointers to Asterisk's Dialogic support? Which boards are supported, driver status, and etc. Thnx

Hello all Asterisk Users, This is my first post here. We are in a process of moving Dialogic 240/JCT-T1 from old voicemail server to Asterisk box. Which card drivers do we need? Please share experience if anyone have successfully configured Dialogic JCT-T1 card with asterisk? Only source proves that this card work with * http://lists.digium.com/pipermail/asterisk-dev/2003-April/000244.html

Please rest assure that I have been following the * development for a while and understand the value the Digium hardware gives me vs any other vendor. Most of the people on this list probably know whats good for everyone else, but I like to find out for myself (I am not a CNN junky). Now the * site mentions Dialogic as supported hardware at: http://www.asterisk.org/index.php?menu=hardware It

I am working on a project involving the conversion of a Mu-law sound format (Dialogic Mu-law wav format) file into a standard PCM encoded wav file format. Could somebody tell me if this feature is supported in the Vorbis software and if there is any source code available that performs this task. If not, does anybody know of any resources that might provide me with this tools or information.

Hi all, I was just wondering if this is the intended behavior. Here is my setup: controller def index respond_to do |f| f.xml { render :xml => true } f.html { render :layout => :none } end end In my views I have a file for each type index.herb index.xerb The first request I send is cached and interferes with the other one. For example, if I send an xml request

Hi list, Anyone knows where I can get information about configuring a Dialogic card to run with Asterisk?? The model I have is D/120JCT-LS. Somebody told me that I had to buy the driver, but I don't know if this is true and if so, who, how and how much...

Okay. So, after having spent quite some time never really tracking down why my package NEWS files were unacceptable to readNEWS(), I noticed that there was recent (to me anyway) development that allowed the NEWS to be done as an Rd file. Sweet! A more standard format... I converted a NEWS file in one of my unreleased packages to Rd format. checkNEWS() gave it a thumbs up. But then it went south.

I am new to this mailing list. I apologize if any needed information is missing. I know this is a bit much to ask of wine's current serial port implementation, I am hoping someone has maybe figured this out already? Or can help me further the debugging process, I'd rather be part of the solution then simply another complaint about wine's serial port. ***** problem description

As kindly pointed out to me (oh my decaying gray matter), is.object() is better suited for this test; $ svn diff src/library/base/R/diag.R Index: src/library/base/R/diag.R =================================================================== --- src/library/base/R/diag.R (revision 68345) +++ src/library/base/R/diag.R (working copy) @@ -23,9 +23,11 @@ stop("'nrow' or

Is there a tidy way to get the names of objects passed to a function via the "..." argument? rbind/cbind does what I want: test.func1 <- function(...) { nms <- rownames(rbind(..., deparse.level=1)) print(nms) } x <- "some stuff" second <- "more stuff" test.func1(first=x, second) [1] "first" "second" The usual

Spanish/Espa?ol: Hola a Tod at s, Estoy en la implementaci?n de una soluci?n a medida en la cual requerimos conectarnos v?a SIP a un IMG de DIalogic y salir hacia otras centrales (MSC) v?a SS7, la conexi?n entre Asterisk y el IMG es SIP, pero como requerimiento necesito enviar un NOA (Nature of Address) con valor 8 por requerimientos normativos, hasta ahora no he podido encontrar como puedo

Hi, Asterisk 1.4.17 Sangoma a102DE I'm having some issues sending CallerID Name to a Dialogic based phone app. According to the pri debug (asterisk2a-pri-debug.txt in [3]) you can see that it is sending the CallerID Name "Mike - Budgetone - reachme.com" to the Dialogic card, but it isn't regestering on the Dialogic based system. I can receive CallerID Names from our Paetec,

Below are a number of errors that appeared in a log file today. I am running Samba v2.2.5 on a Red Hat Linux v7.3 system. The client experiencing/causing the errors below is a WinXP(SP1) machine. The log entries below pertain to 2 errors, the first in handling file "6.zip" and the second in attempting to run file "DiskeeperWks413zssi.exe". I didn't see the first