similar to: SIP Testing

**** DRAFT **** DRAFT **** DRAFT **** DRAFT **** I've been using the DTA310 from Packet8.net for a couple of weeks. The DTA310 is about $130 without the Packet8.net VoIP service. It only supports SIP. On the back of the DTA310 is a power connector (power supply is provided with the product), a 10/100 Ethernet port, an FXS port, and a reset button. The front of the device has LEDs for

Come to think of it since the DTA310 uses DNS to find the SIP server, you could setup a DNS cache and override the DNS entry for what packet8 uses (proxy2-eqix-sjo.packet8.net : 15062, over here) to point to the IP of your own SIP server? Kind of a hack but it should work as long as it's running on port 15062. I am very new to this so I don't know if there's a port standard for SIP

I have my DTA310 getting an IP via DHCP. I loaded the unlocked firmware version (Application Code Version: DTA version 1.0 US (8x8 001111)) onto it via TFTP, so I could access the SIP configuration. Under the SIP config, I put the IP of my * system, the 5060 port, and for Domain Name, I put default (is that right?). I checked off the Send Registration Request box. Dial Plan I left at the default,

I received a message from Packet8 last night telling me they added some new area codes. I took a look at their new area code/rate center finder page and it looks like the added a LOT of new area codes. They now have phone numbers available in almost every state. The URL for finding out which area codes and rate centers are available with Packet8 is at http://www.packet8.net/about/areacodes.asp

I have a lot of experience, all of it pretty good, with various Sipura products, Grandstreams, Zultys, IAXy, and numerous SIP/IAX soft phones connecting into Asterisk as clients. Good sound quality, great reliability. I've tried two of the units named in the subject line, and frankly I'm frustrated. Calls usually start out OK, but within a brief period the sound goes totally to

Sorry for the misspelling... Thanks for the replies. I will set it up and start playing. This is all very exciting. I've been using VoIP as my primary phone but this is going a bit further. At the office we have a T1 that is probably fairly dead after hours. Supporting 5-10 users should be fine I'd imagine. I've read 1 VoIP connection uses about 64kbps or 8KB/s? So...

I am looking to help out my company find a more budget conscious but reliable way to hold conference calls between 5+ people. 4x a month we hold several hour long conference calls during non-business hours. All of the employees have high speed internet. Currently we dial up an AT&T conf using regular analog phones. I don't have a great grasp as to what Asterick is capable of, but my

was breezing over http://voxilla.com/ Looks like a new ATA from the founder of Komodo Technology (aka the Cisco 186) Sipura SPA 2000 http://www.sipura.com/products/spa2000.htm to join the others Cisco ATA 186/188 http://www.cisco.com/warp/public/cc/pd/as/180/186/ 8x8 DTA-310 http://www.8x8.com/products/home_office/dta-310/index.asp.html Grandstream HandyTone 286

Hi ;) I'm a french newbie and i installed asterisk 1 day ago. I've got an ATA186 and a computer with Sjphone installed. If i want to call the sjphone from the ata or call the ata from de sjphone everything is ok. My problem is ,that i can't call the voicemail or any other phone number ..as 600 for exemple from the ata or the jphone. I don't know why but i looked after a long

I am setting up a new asterisk based call center. I just read: http://www.voip-info.org/wiki-IAX+versus+SIP After reading this and other google results for "IAX vs SIP" is there any reason why i should use SIP anywhere !! t

I'm trying to get asterisk working w/ packet8 (incoming and outgoing) and a dta310 so I can have more control over voicemail. I've looked at the data stream coming from the dta310 and from packet8, but I haven't managed to get the phone to actually place invites through asterisk. On the asterisk end with chan_oss.so, I can make it dial and I hear ringing and the first second of

Hi All, I've got an * PBX up with couple of stations and now I'd like to integrate my Vonage service for outgoing PSTN calls. Is this possible if I have an account with them that uses their hardware box (ATA186) or do I need a 'softphone' account? thanks...

Can anyone recommend a client / phone that runs on Windows XP, with either a sound card or some other hardware? Ideally free, but does not have to be. Thanks...

Hi, I've downloaded samba-2.0.7-hppa1.1-hp-hpux11.00.tar.Z and installed it on a HP K380 HP-UX 11.00 server. After starting the services I receive the following messages in the syslog and therefore can't get it to work: May 31 01:54:45 gemtst inetd[5462]: netbios-ns/udp: Service enabled May 31 01:54:45 gemtst inetd[5462]: bootps/udp: bind: Address already in use May 31 01:54:45 gemtst

I found some old messages regarding a possible pkt8 DTA "bypass". Anyone is using Packet8 with Asterisk? ========== http://www.dslreports.com/forum/remark,7292324~root=voip~mode=flat Got Softphone Working with Packet8 Friendly name: {Anything you'd like.} SIP domain: packet8.net SIP proxy: packet8.net Leave everything else at the default. When you login, it will ask for a username

Noob here, my apologies in advance. Recently my employer decide to stop paying for my home POTS line, so I ordered packet8 for a home line instead of another POTS line, since I really dislike my local phone company, and the POTS line without any long distance would cost more than the $20 to packet8 with unlimited US calling. Anyway, this whole thing got me started thinking about VOIP a lot

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: siproxd.url Type: application/octet-stream Size: 82 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030507/bddd870b/siproxd.obj

I have packet8 and I have spent many hours on the phone with them. If someone has found away around there DTA configuration I would like to know so I can bring it in house to my * box. But as far as your question is concerned. No. Not that I know of. They wouldn't give me any information about the configs. .o-------------------------------------------------------o. Brian Fertig Network

Hi John, I've been using Packet8 via a physical ATA and XP100 card for some time. As far as I know it is not possible to connect to the Packet8 service without the ATA. If this is not the case I would be very interested to hear this. In addition since moving to the USA I now only have a single packet8 line into my asterisk box (I used to have this and a 2nd regular pstn line) I used to be

Looks like www.packet8.com <http://www.packet8.com/> has been hacked :-( The phone service is offline as well. Interesting to note that the whois is showing an update today but doesn't look like details have changed. Domain Name: PACKET8.NET Registrar: REGISTER.COM, INC. Whois Server: whois.register.com Referral URL: http://www.register.com Name Server: