similar to: syslinux-4.10-pre15 and KVM guest booting problem

hello ! i try to use a network technology on one single host, which wasn`t designed for that. to give a short overview of what i`m talking about: AoE is just like a "networked blockdevice" (just like nbd/enbd) - but without tcp/ip. AoE kernel driver is the "client end" (see this like an iSCSI initiator) - and an etherblade storage appliance is the "server end"

If your email was sent to a distribution list, don't worry, someone else on that list will reply to your query. If your email was sent to me directly, please be aware that I am currenty out of the office with no access to email. All issues should be routed to my manager, John.Farey at oracle.com. Thanks

Hi all, With the help of Michael Brown I have root-caused the crash that I had running Syslinux 4.10 under iPXE to a bug in a specific iPXE driver, sky2. As such, I am hereby promoting Syslinux 4.10 to the stabilization track. One important bit which is still not there is to fix sanboot.c32 so that it can switch to an iPXE/gPXE SAN I'm still unclear if gpxelinux.0 should be removed or

If your email was sent to a distribution list, don't worry, someone else on that list will reply to your query. If your email was sent to me directly, please be aware that I am currenty out of the office with no access to email. All issues should be routed to my manager, John.Farey at oracle.com. Thanks

Hi, This series of patches contains the second part of an initial implementation of the IEEE 802.1Qbg standard: code for the exchange of VDP VSI TLVs between a host with virtual machines and an adjacent switch. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptool. A way to deliver profiles to lldpad from libvirt using netlink

Hi, This series of patches contains the second part of an initial implementation of the IEEE 802.1Qbg standard: code for the exchange of VDP VSI TLVs between a host with virtual machines and an adjacent switch. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptool. A way to deliver profiles to lldpad from libvirt using netlink

Hello, I am having a some problems getting SSHD to run on the Ipv6 interface. Interface/Ipv6 Address: ipv6.open-systems.org [kevin at satan kevin/xp-0.0.15] 536 $ping6 ipv6.open-systems.org PING6(56=40+8+8 bytes) 3ffe:1200:3028:ff01::cab --> 3ffe:1200:3028:ff01::caa 16 bytes from 3ffe:1200:3028:ff01::caa, icmp_seq=0 hlim=64 time=73.96 ms sshd_config: ListenAddress

I just picked up 3.10-pre15 and the "PXELINUX corrupts graphic filename referenced from DISPLAY file" bug is zapped. Yipee! Thanks hpa. And Arwin too, if that 'xor esi,esi' was the crux. However, LOCALBOOT -1 and LOCALBOOT 0 don't work the same as they did for me in 3.07. :-( 3.07: LOCALBOOT -1 apears to work as I have a hard disk listed in bios boot order after the

Hi all, I just pushed out SYSLINUX 3.71-pre15. This version officially begins the release candidate stage of SYSLINUX 3.71. To be honest, I'm a bit baffled that the numbers got that high for what has always been intended as a maintenance/bugfix release, but those 15 prereleases only correspond to 55 commits total, so I guess it's really not that much. -hpa

I just released 2.09-pre15; it has a slightly improved E820 memory parser, which I'm hoping will deal with the "incorrect length" BIOS bug some people reported. If you have a machine with this bug, *PLEASE* test out this release, since I really want to release 2.09 this weekend. ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/ Thanks! -hpa

As promised, here's the DCE patch for pre15. (and this time i didn't forget the attachment ;) It enables ssh to authenticate, set groups and attach network credentials. It's a clean implementation (i left out the credential-move-hack). This one adds the --with-dce option to configure Some notes have rised: The for loop 3->64 closing fd's... is it really needed? Is it

I have 3 machines, T60 thinkpad with e1000 NIC Dell PowerEdge 2950 with bnx2 NIC HP DL360 G4P with tg3 NIC All running xen 3.03 / 2.6.16.29-xen I have a netbootable image with 2.6.16.29-xenU. This image when it boots creates a vlan eth0.4002, and then tries to communicate on that interface to a central server. On the machines with e1000 an bnx2 NICs, this works fine. On the

I just installed the 1.2pre15 RPMs and, as hinted in the announcement, it fixed this problem. Thank you! _______________________ Ron Bickers ===== ORIGINAL POST ===== I'm using SecureCRT (http://www.vandyke.com/) to connect to OpenSSH (1.2pre14 built from source RPMs) running on RedHat Linux 6.1. When I forward a local port using SecureCRT to a port on the server and try to connect, I

Hello all, I have done more work on the syslinux shuffle library. This is more higher-level work, in particular it is specific to loading Linux kernels. This stuff allows manipulating initramfs on the fly, if desired. As a demo, I have written up a module which loads a Linux kernel with all the usual stuff, but optionally adds the DHCP packet from the PXE stack into a file named

Okay, I have found a workaround for the build problem that affected -pre13 and -pre14, and as a side bonus I have pulled a couple of fixes, including Sebastian's latest gfxboot updates. -hpa

I don't remember what we did to fix this last time, and I've had to rebuild my system completely from scratch over the past few days, so dont' have past patches to work from ... new-relay:/usr/slocal/src/openssh-1.2pre15> make gcc -g -O2 -Wall -I/usr/slocal/include -DETCDIR=\"/usr/local/etc/ssh\" -DSSH_PROGRAM=\"/usr/slocal/bin/ssh\" -DHAVE_CONFIG_H -c

Hello, I am running Shorewall 2.0.2f, on SuSE 9.2 distro, kernel 2.6.8-24.11-default My ip addr show output is as follows: 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:

Hi, I would like to know if somebody can point me out how to configure several DomUs in a private LAN (for example 192.168.100.0/24) and one DomU with two interfaces (one - 192.168.100.0/24 and two - internet). So far I have enabled in xend-config.sxp: (network-script network-route) (vif-script vif-route) My config files have: /mnt/VM/1.cfg:vif = [''ip=192.168.1.3'']

Hi, poids taille fumeur sexe sport etat 85 184 oui homme 1 malade 65 175 oui homme 1 malade 74 180 oui homme 2 gueri 79 175 oui homme 2 malade 71 165 non homme 3 gueri 80 185 non homme 3 gueri 75 180 non homme 4 malade 69 155 non homme 4 malade 74 168 oui

Hello list! When em0 has an inet address while bridge0 doesn't, it seems to be OK: ----- bs1% uname -a FreeBSD bs1.sp34.ru 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun May 25 20:15:26 MSD 2008 root@bs1.sp34.ru:/usr/obj/usr/src/sys/BSM i386 bs1% ifconfig em0; ifconfig tap0; ifconfig bridge0 em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500