similar to: question on software raid-1

Hi, I'm trying to copy my CentOS install to a new drive. - old drive is /dev/hda and had hda1 : /boot hda2 : swap hda3 lvm hda5 : lvm hda4 : /usr/local - new drive is /dev/hdb hdb1 : /boot hdb2 : swap hdb3 : / I decided to get rid of lvm which is useless to me. I've created and formated the new partitions and copied anything from the old drive to the new one

I have a CentOS 4.2 system that was set up VERY quickly following the demise of its former life as a CentOS 3 server - you don't want the full story, but it had to be done quickly to get a company up and working following a slight disaster involving an electrician, a portable appliance safety tester and a pulled power cable - anyway, here's where I am at... Everything is running fine but

Hi all, I've installed CentOS 4.4 in a box which previously had dual boot (XP SP2 and Ubuntu) I can run CentOS without problem but I can't boot XP SP2. When I try it the system simply hangs... [root at seth ~]# fdisk -l Disco /dev/hdb: 40.0 GB, 40020664320 bytes 255 cabezas, 63 sectores/pista, 4865 cilindros Unidades = cilindros de 16065 * 512 = 8225280 bytes Disposit. Boot Start

Hi, When I perform a software RAID 1 or RAID 5 installation on a LAN server with several hard disks, I wonder if GRUB already gets installed on each individual MBR, or if I have to do that manually. On CentOS 5.x and 6.x, this had to be done like this: # grub grub> device (hd0) /dev/sda grub> device (hd1) /dev/sdb grub> root (hd0,0) grub> setup (hd0) grub> root (hd1,0) grub>

Hi All, I'm currently trying to install centos 5.4 x86-64bit on a raid 1, so if one the 2 disks fails the server will still be available. i installed grub on /dev/sda using the advanced grub configuration option during the install. after the install is done i boot in linux rescue mode , chroot the filesystem and copy grub to both drives using: grub>root (hd0,0) grub>setup (hd0)

I set up IDE software-RAID on a test machine for testing the recover functionality. The problem is that it somehow won't boot after removing the first disk, although grub etc. seems to be setup okay. Here's some background: 2 disks hda and hdb RAID 1 setup: /dev/md0 (hda1 + hdb1) /boot /dev/md1 (hda2 + hdb2) / /dev/md2 (hda3 + hdb3) swap done with disk druid during initial setup from

Hi, I'm currently experimenting with software RAID1 on a spare PC with two 40 GB hard disks. Normally, on a desktop PC with only one hard disk, I have a very simple partitioning scheme like this : /dev/hda1 80 MB /boot ext2 /dev/hda2 1 GB swap /dev/hda3 39 GB / ext3 Here's what I'd like to do. Partition a second hard disk (say, /dev/hdb) with three

I have Windows 7 on /dev/sda and CentOS 6.4 on /dev/sdb. Here are the layouts: (parted) select /dev/sda Using /dev/sda (parted) print Model: ATA WDC WD10EZEX-00Z (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 374MB 373MB primary ntfs boot

I have a p4 motherboard with 2 ide interfaces, I connect 2 40 GB drives as hda and hdc, I install Centos 4 from a CDROM, and partition the drives as 2 x raid partition each plus a swap partition on hda, the make md0 and md1 to install /boot and / respectively. Install goes well, everything looks great, go to reboot from drives, and all I get is "grub" but no boot. I have tried this ten

Hi I have a degraded array /dev/md2 ===================================================================== $ mdadm -D /dev/md2 /dev/md2: Version : 00.90.01 Creation Time : Thu Oct 6 20:31:57 2005 Raid Level : raid5 Array Size : 221953536 (211.67 GiB 227.28 GB) Device Size : 110976768 (105.84 GiB 113.64 GB) Raid Devices : 3 Total Devices : 2 Preferred Minor : 2

Hello, I have two disks sda and sdb. One of the was broken so I have changed the broken disk with a working one. I started the server in rescue mode, and created the partional table, and added all the partitions to the software raid. *I have added the partitions to the RAID, and reboot.* # mdadm /dev/md0 --add /dev/sdb1 # mdadm /dev/md1 --add /dev/sdb2 # mdadm /dev/md2 --add /dev/sdb3 # mdadm

I must have really shot myself in the foot on this one. I reinstalled CentOS 4.4 (have to, for now) on my test machine, exactly the way it was before (same options anyway), but when it comes up, I get: Booting 'CentOS-4 x86_64 (2.6.9-42.ELsmp)' root(hd1,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.9-42.ELsmp ro root=LABEL=/ rhgb quiet Error 15: File not

Hello fellow xenophiles and happy new year! I''ve documented the install procedure for a prototype server here since I found no similar document Anywhere on the net. It''s a Sarge-based Domain0 on linux root raid from scratch, using LVM to store the data for the domU mail server and its mailstore. I humbly submit my notes in the hope that they are useful to some weary traveller.

On 8/5/2015 12:34 PM, Chris Murphy wrote: > On Wed, Aug 5, 2015 at 9:12 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >> I am trying to upgrade my system from 500GB drives to 1TB. > I'm going to guess that there are no IDE drives that have 4096 byte > physical sectors, but it's worth confirming you don't have such a > drive because the current partition

I have been trying to multiboot centos 4.1 and the current solaris express build 15. I have two hard drive s, the first one ( hd0 ) devoted to CentOS 4.1 and windows xp (no problems). The second drive (hd1) for Solaris 10 only. I tried to boot solaris from CentOS grub and got the following error messages: Booting Solaris 10 root(hd1,0) Filesystem type unknown, partition type 0Xbf kernel

On 8/5/2015 1:00 PM, Chris Murphy wrote: > On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >> How would I go about pointing it at the partition? >> >> What I am currently doing is this: >> device (hd0) /dev/hdg >> root (hd0,0) >> setup (hd0) > > setup (hd1,0) > > It's hd1 if your device map is correct and

I have configured 2x 500G sata HDD as Software RAID1 with three partitions md0,md1 and md2 with md2 as 400+ gigs Now it is almost 36 hours the status is cat /proc/mdstat Personalities : [raid1] md0 : active raid1 hdb1[1] hda1[0] 104320 blocks [2/2] [UU] resync=DELAYED md1 : active raid1 hdb2[1] hda2[0] 4096448 blocks [2/2] [UU] resync=DELAYED md2 : active raid1

Hi! Can extlinux boot Linux kernel from the second drive? I want to leave Windows XP on the first IDE drive and put Linux to the first partition (ext2/ext3) on the second IDE drive. I am allowed to change MBR on the first drive. Will the following configuration work? /dev/hda1 - Windows /dev/hdb1 - Linux root (/, /boot, ...) /dev/hda - extlinux in MBR /boot/vmlinuz extlinux /boot

Hi, I'm installing CentOS 4.4 64 bits with RAID 1 per software. But when the installation finishes, i cannot boot the system. I always get GRUB error 15. Any ideas ? Thanks in advance. Warm Regards, M?rio Gamito -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070228/9c237e08/attachment.html>

I have attempted to address all comments: http://wiki.centos.org/HowTos/SoftwareRAIDonCentOS5 Give me your best shot! :-D Phil