similar to: Mainpine OCTO+ and CentOS v4

I've been working on a way to send faxes from a bash script. It requires changing what parameters are used for each command. I keep having problems with quoted strings passed to the command. I've created a really short test script which fails on my system. commandline="sendfax -f noreply at prudentrx.com -n -x \"Test fax\" -d 13105551212 /etc/hosts" echo

I needed more serial ports that the basic CentOS Version 4 system is built to use so I'm using the following kernel build instructions to build the new 2.6 kernel: http://www.hylafax.org/content/Handbook:Basic_Server_Configuration:Modem-speci fic_Guidance I believe the procedure is correct but the kernel is not building. I used the "kernel-2.6.9-34.EL.src.rpm file that I found on one

Hello experts, I?ll try and keep this brief but detailed (if that?s possible.). I?m sure I don?t understand the technologies sufficiently but I believe I?m seeing counter-intuitive behavior with my Samba 3 setup. What I want is nice, tight Win 2K3 security. What I?ve got is ADS integration, including domain user authentication using winbind, but I can?t get the security level right. Problem

Hi all, I have been asked to look into using asterisk as part of our setup. The eventual goal is to replace as many parts of the existing setup as possible, but in the interim, I just have to make it bolt on and work with all existing parts. My current setup is as follows: Cisco 7940 (ext 2000) | v Asterisk -> Snom SIP proxy(v2.22) -> Vega100 PSTN gw -> Index PBX |

I have an existing Hylafax system using a mainpine 4 port board, 4 POTS lines. Have a recently installed Asterisk system, with a dedicated T1 line. (Well, it's really a fonality system). What would I need to do, or where is the reading material, for what I need to do, to convert the Hylafax server to use the T1 line? Reliably. Preferably to use DID's as well. The current FAX works

Hello All, Ipsos is currently hiring a Data Scientist, if this position is of interest, please apply using the link below.?? If you have any questions, please do not hesitate to reach out to me directly. Data Scientist - Culver City, CA Summary: A capable and creative programmer with unrelenting attention to detail, an ability to work well with a small team (including both programmers and

Hello All, Ipsos is currently hiring a Data Scientist, if this position is of interest, please apply using the link below.?? If you have any questions, please do not hesitate to reach out to me directly. Senior Data Scientist - Culver City, CA Summary: A capable and creative leader who is experienced in designing, conducting and selling Data Science analytics.? Role includes sales and

We have to rebuild our kernel to add support for a Mainpine fax board on a CentOS 5.5 board: http://www.hylafax.org/content/Handbook:Basic_Server_Configuration:Modem-specific_Guidance#Mainpine_IQ_Express We followed all steps, but when calling rpmbuild, we are getting: [root at hylafax SPECS]# rpmbuild -ba --target x86_64 kernel-2.6.spec Construction pour plate-formes cibles: x86_64

Hmm beginning of the end of free trixbox by the sounds of it. It was good while it lasted but time to download the latest iso while it's still available by the sounds of it. Regards, Dean Collins Cognation Pty Ltd dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 Ph +61-2-9016-5642 (Sydney in-dial). ________________________________ From: trixbox

Hi I am trying to connect a reliance netconnect data card on my linux box ( cent os ) , i am able to the detect the device /dev/ttyUSB0 these are the following steps I did : Check your card is recognized by the kernel # cat /proc/bus/usb/devices ..... ..... T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P:

If you live in Orange County, California, USA, please come join us at the OC Ruby User''s Group. http://www.ocruby.org We have formal meetings every 4th Thursday, usually at the Microsoft Office in Irvine (405 and Jamboree). And on all of the other Thursdays we have informal get togethers at Panera Bread in Irvine (Culver and Barranca) which has free WiFi. So come join us, get on the

I''m posting this job for Sony Imageworks. They''re located in Culver City, in sunny Los Angeles. http://www.imageworks.com/films/index.html They are looking for people who are well versed in a number of technologies and enjoy learning new languages and being somebody who can be thrown at a problem and learn what they need to do get the job done. Ruby on Rails is being used in

Ipsos -- a global market research firm -- has an opening for a Data Modeler/ Statistical Programmer. We seek an experienced and creative programmer with unrelenting attention to detail, an ability to work well with a small team (including both programmers and non-programmers), and a strong interest in behavioral consumer research. Fluency in R is required.

There are some tools for handling genetic data in the 'genetics' package on CRAN. These were motiviated by the need to process population genetic data. -G > -----Original Message----- > From: Daniel Edmund Davison [mailto:davison at midway.uchicago.edu] > Sent: Monday, May 05, 2003 1:58 PM > To: r-help at stat.math.ethz.ch > Subject: [R] DNA > > > > Hi, is

Irvine California, Heritage Park Library on the corner of Yale and Walnut. The Walnut is just south of the 5 fwy and Yale is between the Culver and Jeffery offramps. Meeting will run from 6 - 9pm. This week will feature a review of the SNOM 320, a demo of SIPX, some book giveaways courtesy of O'Rielly, and much more. For more information, contact me Kerry Garrison Director of Technical

Hi folks, Don't know if it could be interesting or not, even useful, but past days i was spending my time trying to use an old gsm motorola v150 mobile phone to get access to my host from my palm device with pssh (http://www.sealiesoftware.com/pssh/), these are the steps i did to accomplish it, feel free to suggest or improve it, anyway i found it usefull. First, this motorolla has an usb

Hi everybody, I'm looking for information about using GlusterFS with ZFS. I got information that talked about a sort of incompatibility between the both technologies because of unsupported xattr feature in ZFS. What are the latest news about this ? Thank you in advance.

Bonjour a tous, voila j''ai quelque soucie a comprendre comment s''enchaine les appels de la vue/controleur/model dans Rails :( j''ai une classe qui me permet de faire la liaison entre ruby et c++ (ca marche parfaitement) que j''ai mis ds le repertoire model (je ne l''ai pas cree avec generate parce que je ne veux pas de BD! et j''avais

Hello, The problem: With the command: net ads join my_linux_box my samba 3.0.1rc1 works fine with a W2k kerberos server But i prefer use the ktpass command on w2k server (and our m$ guru). The problem seems to be that samba dont use /etc/krb5.keytab. The quick read of source and some mail in the archives gives me the beleive that it use a memory keytab (and secrets.tdb ?). I m not sure. Could

Salut alex, j''ai un petit souci. quand j''utilise "demotaskbaricon" avec traducteur-wxruby, que j''ouvre mon application(donc l''icone apparaît dans la barre de lancement rapide) et que je ferme mon application, l''icone disparaît tout de suite. Mais quand je l''utilise avec l''exemple Wizard et que je ferme mon application