search for: wvdialconf

I've been having a problem with getting a Mainpine OCTO+ working on CentOS Version 4. I know at some point I'll have to recompile the kernel in order to access all 8 ports but something is still not right. Wvdialconf almost every will id all of the ports. All too often it can fine the modem on at least half the ports on the board. I'm starting to hear that something is not right on V4 when using the mainpine. System config: Dell 2650 dual Xeon with 2GB ram. Has anyone setup a OCTO+ on V4 yet? Thanks Joh...

...Dialer Defaults] Modem = /dev/ttyUSB0 Baud = 57600 Setvolume = 0 Dial-AT-OK ATDT Command = Init1 = ZTE FlowControl = Hardware (CRTSCTS) Phone = #777 Username = 7228412233 Password = 7228412233 New PPPD = yes Carrier Check = no Stupid Mode = yes wen i try to detect the modem it gives me a failure wvdialconf /etc/wvdial.conf ::::::: Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Port Scan<*...

...oot at spoolbox crash]# l /dev/ttyACM0 crw------- 1 root root 166, 0 ago 8 20:54 /dev/ttyACM0 In my case, i wasn't sure about this phone modem facilities, and i start playing with init secuences to discover the modem with 'minicom' tool, without success. Finally i decided to use 'wvdialconf' utility to check out my lack of kwlg. : [root at spoolbox crash]# wvdialconf newconffile Scanning your serial ports for a modem. Port Scan*1>: S0 S1 S2 S3 S4 S5 S6 S7 ttyACM0*1>: ATQ0 V1 E1 -- OK ttyACM0*1>: ATQ0 V1 E1 Z -- OK ttyACM0*1>: ATQ0 V1 E1 S0=0 -- OK ttyAC...

I am a rank newbie to Linux and wine. I am running Ubuntu Dapper on an AMD 1800 mhz machine, wine 0.9.15 Everything I have read says use the installer to load windows programs. Where is the installer? Thanks, -- Ron Thompson On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA http://www.plansandprojects.com My hobby pages are here:

I am running a Xen installation on a Centos-4.4 based test box, my desktop unit, and I am having intermittent problems installing certain pieces of software. Some time back I posted to this list regarding my inability to install Adobe Acrobat on this unit and was advised to essentially repackage the software and try again. This is beyond my present means of knowledge or time to acquire same and