search for: winbond

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1...

Hi, Looking for a driver/s for Winbond W83792AG Or a how2 for CentOS. TIA Gerald -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hi! It is the first time I post to this ML, so please be patient :-) I read that a zaptel driver for Winbond 6692 ISDN adapter is on going ... is there any chance to get some "test code" ? I just bought a similar adapter: I tried getting a HFC based card, but here in Milan (Italy) ISDN card are getting really uncommon..... :-( The home PBX is working fine right now with chan_modem, but I sup...

Hi! Have anyone any idea why w83793G driver is not in the upstream vendor kernel? do i have to compile my own kernel for this to work? Thank you, Adrian -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3110 bytes Desc: S/MIME Cryptographic Signature URL:

...yan piece of junk and going back with the S-M board. I believe it has similar north/southbridge chips on it -- at least they are the intel MCH ICH5R and PXH plus the 82546GB. One area that the Tyan board was seriously lacking in was in the hardware monitoring department. The S-M board uses a winbond 83627HF chip. Another area I'm wondering about is with the SATA controller. Supposedly the ICH5R supports Raid 0, 1, and JBOD's, but does CentOS handle the sata raid without difficulty? Tnx.. -- Snowman

HI: Is there any way to raise up sound volume on fxo on TDM04B without changing tx-gain and rx-gain ? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

...nel: usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 May 22 16:52:40 mega2 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 22 16:52:40 mega2 kernel: usb 1-1.2: Product: Hermon USB hidmouse Device May 22 16:52:40 mega2 kernel: usb 1-1.2: Manufacturer: Winbond Electronics Corp May 22 16:52:40 mega2 kernel: usb 1-1.2: configuration #1 chosen from 1 choice May 22 16:52:40 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 May 22 16:52:40 mega2 kernel: generi...

Can anyone shed some light on this subject? I don't have a clue where to begin looking. It's RHL 6.0, Samba 2.0.3, stock kernel. Kevin --- |\ _,,,---,,_ ZZZzz /,`.-'`' -. ;-;;,_ |,4- ) )-,_. ,\ ( `'-' Kevin Alan Pieckiel '---''(_/--' `-'_) kapieckiel@harding.edu (This message was written with

..."Details" button in the error message. Who put that in; it's pretty cool? So I used the details button and got the backtrace and put it here: http://pastebin.com/7srywFKG. Because people usually ask, here's my hardware info: Dell XPS 8300 Intel i7-2600 processor 64-bit @3.4 GHz Winbond Motherboard 8 gigs of SODIMM DDR3 RAM @ 1333 MHz, 4 two-gig sticks, only 4 slots Winbond A03 BIOS [SB X-Fi Xtreme Audio] CA0110-IBG (sound card) ATI Redwood [Radeon HD 5670] (graphics card) But mind you, last time we had this bug, it did not work on my laptop either (haven't tried laptop + Hyp...

I have a weird problem and I cannot put my finger on it. I hope somebody can help me out. Incoming and outgoing calls via the internet go perfectly well. Calls that originate from a SIP or AIX client on the local LAN (100 Mbx) and terminate via a Winbond BRI often (not all of the times, but most of the times) are having a (about) 5 second delay starting from when I say something until the other end hears what I said. Everything seems to go okay at the start of a conversation. But the problem seems to get worse when the call lasts longer (only a...

Hello, I have an SMP motherboard (Gigabyte GA-7DPXDW+) and I'm trying to monitor the temperature of the processor. The chipset for I/O control is Winbond W83627HF. When using any program for monitoring temperatures, I only get the temperature reading for the second processor. How do I get readings for both processors or only the first one ? TIA

...'t seem to be any variable speed (the fans are PWM compatible) ... they either idle at almost nothing, or suddenly burst into a high-pitched scream that gets my ears bleeding after a few seconds. Once they jump to warp-10, they remain there. The "Super-I/O" chip on this board is a Winbond W83627DHG which does the temperature and voltage monitoring. Is anyone aware of which driver or kernel module I need for that chip in order to get control of the fans? The Supermicro web site and the board's manual aren't any help. Fresh installs of CentOS-5.5 and RHEL-6 don't ex...

Subsequent to some previous E-Mails, I've been trying to dig into the ISDN - BRI situation a bit more. I have determined that I have a HFC card with Winbond chip, but I'm not sure what combination of drivers is best or usable. zaphfc is out because it only supports the cologne chip. misdn is a possibility. I haven't determined if it supports the card natively, or needs a card specific driver under it. capi is a possibility, but again, I don...

...-a997-11e1-83eb-00259061b51a to enc at n500304800182f4fd/type at 0/slot at 6/elmdesc at Slot_06/gptid/faa2b1ca-a997-11e1-83eb-00259061b51a - path too long Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: <Winbond Electronics Corp> at usbus0 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 kbd2...

I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch of errors. (By the way, can I use chan_capi for ISDN card with winbond w6692cf chipset?) I'm not a linux expert, still :-) Before compiling, when I type "modprobe capi" to load capi module, and then "lsmod", i get list of modules: capi 6208 0 kernelcapi 30496 1 [capi] capiutil 22272 0 [kern...

hello, anyone has worknig ISDN hfc-pci card in DDI (DID) point2point mode? what kernel ? and second question mISDN driver .. anyone has working solution with mISDN and maybe fritz card? what you suggest for DDI -> point2point mode (card,kernel,chan_..., ...) ? thank you, Tomaz

...sb: (Again, after the problem appears) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon Bus 001 Device 004: ID 13fe:5200 Kingston Technology Company Inc. Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB I plan on verifying/updating the BIOS tonight. Is there any other information that I could provide to help diagnose this? -Ben

I may have found a source of an A-Ticked HFC 4BRI PCI adapter in Australia, and will be testing one next week if all goes well. I don't want to post the details of the reseller online unless invited to do so, so if nobody replies and says they are interested then I won't :) I'll follow up once I've tested it. Let me know if you want the details. James

Hello everyone, I'm unable to read temperature Gigabyte H77-DH3H motherboard. Is that motherboard supported or am I doing it incorrectly? When trying to access hw.acpi.thermal everything appears to be ok, but it is not, the system always returns 27,8C and 29,8C which fooled me initially - the values never change. Here is output: [chinatsu]:/root# sysctl hw.acpi.thermal

...ing list, bugzilla & git repos Chris Ball (2): Build fix for EXA 3 Revert "Build fix for EXA 3" Stefan Dirsch (1): Prevent MergedFB setups from crashing. Thomas Jaeger (1): Fall back to software for unsupported repeat modes Yannick Heneault (9): fixed winbond/nuvoton min pll clock to correct value (18.75Mhz). Fixed PLL m,n,p selection for G200eW to respect byte granularity. Updated PLL algorithm for G200eW. Fixed bad access issues and ddc1 implementation for IP core. Modified memory count rountine for G200eW to detect up to 16Meg...