search for: udevs

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

Hello, The current dependancy on hotplug|udev (>= 0.59) seems bad. As far as I remember, last week, when I tried to install Ralph packages, I got an error from hotplug/udev and I had to use udev from backports.org Anyone know which version of udev/hotplug we will have to depends on ? Maybe we could simply rely on a recent udev dependancy, because afaik udev now provides hotplug. -- Julien

Hello, Got cocky and decided to upgrade from from 4.7 to 5.2. Have a couple problems I can't figure out. The first is I cannot access webmin securely. I had to use httpd.conf.rpmnew to even get apache to start. Got it running but now I seem to have no secure connection to webmin. Next, I have never seen this before but I don't appear to have problems that I have found. Upon startup,

On Fri, 2015-08-14 at 12:39 -0500, Michael Hennebry wrote: > On Thu, 13 Aug 2015, Leon Fauster wrote: > > > Could you provide more context information? > > Appliance setup, Dekstop setup, server setup? > > There exist a lot scenarios where something > > happen automagically? > > It's a Chimera Desktop 2014. > More specifically, I bought the case, the

When I try to start up zaptel, whilst running ztcfg, I get the following error: Jan 1 10:48:18 bu ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6) My /etc/zaptel.conf is: fxsks=1 fxoks=2 loadzone = au defaultzone=au Channel 1 is a X101P card connected to the PSTN and channel 2 is a S100U box driving an analogue phone. The zaptel kernel module gets loaded OK as does the

I have set up a kvm host and configured a standard clone prototype for generating new guests. One persistent (pun intended) annoyance when cloning is the behaviour of udev with respect to the virtual network interface. The prototype is configured with just eth0 having a dedicated IP addr. When the prototype is cloned udev creates rules for both eth0 and eth1 in the clone. Because eth1 does not

I have set up a kvm host and configured a standard clone prototype for generating new guests. One persistent (pun intended) annoyance when cloning is the behaviour of udev with respect to the virtual network interface. The prototype is configured with just eth0 having a dedicated IP addr. When the prototype is cloned udev creates rules for both eth0 and eth1 in the clone. Because eth1 does not

This is a way to create virtio based devices from user space. This is the background for this patch: We have some images works fine under qemu, we'd like to also run the same image on Google Cloud. Currently Google Cloud doesn't support virtio-vga. I had a patch to create a virtio-vga from kernel directly: https://www.spinics.net/lists/dri-devel/msg248573.html Then I got feedback from

This is a way to create virtio based devices from user space. This is the background for this patch: We have some images works fine under qemu, we'd like to also run the same image on Google Cloud. Currently Google Cloud doesn't support virtio-vga. I had a patch to create a virtio-vga from kernel directly: https://www.spinics.net/lists/dri-devel/msg248573.html Then I got feedback from

I've been testing * on FC3. I have everything compiled and installed. However, when I do 'modprobe wcfxo' (I have an X100P clone), I get the following in /var/log/messages: Nov 24 10:23:40 jfd wait_for_sysfs[3366]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/zaptel/zaptimer' properly (no device symlink) or the sysfs-support of your

On Thu, Aug 13, 2015 at 12:52:26PM -0500, Michael Hennebry wrote: > On Wed, 12 Aug 2015, Jonathan Billings wrote: > >Its not ?autofs? specifically (which is a simple thing) but udev > talking to udisks, allowing your login session to use udisks to > mount the volumes if allowed by PolicyKit, speaking through dbus. > > How do I get the ask-first behavior? > How do I tell

Hi, I have upgraded an Asterisk installation with a Xorcom BRI Astribank that was working under Ubuntu 8.04 to Ubuntu 9.10 and the device is no longer initialized. When I reload the udev rules, I see that the rules seems to be correctly loaded: udevd[452]: reading '/etc/udev/rules.d/40-xpp.rules' as rules file However, these rules do not seem to be triggered: # udevadm trigger

Please be aware that I HAVE NOT TESTED THIS PROGRAM... please try it in a "safe" environment since for all I know it could nuke your "real root" by mistake. -hpa

Package: xen-utils-common Version: 4.0.0-1 Severity: normal A strange issue, when deploying Xen using Puppet, /etc/udev/rules.d/xend.rules and /etc/udev/rules.d/xen-backend.rules files are empty. Specifically, the symlinks point to ../xend.rules and ../xen-backend.rules respectively in /etc/udev, but neither of those files exist. Manually copying those files from another host that was not

In case people here don't follow the udev mailing list, udev seems to be quasi-dropping klibc support. Well, see the forwarded message below. As I don't agree with the "omg udev is complex! use glibc!" rationale, I want klibc and udev to remain working with each other.... Assuming some minor breakage in the near future, is klibc open to accepting patches for "basic C

Hi all I recently setup a CentOS 5.2 server, running XEN (using HyperVM), and then moved the hard drive from my test box to my Intel server.The problem I now have, is that it doesn't bootup properly. Shortly after I see the udev service started, the machine reboots. This keeps on going the whole time. I have managed to kill udev on start-up (with CTRL + C), and then it boots up. So, do I

On Wed, Apr 29, 2020 at 08:59:18PM -0700, lepton wrote: > On Wed, Apr 29, 2020 at 4:58 AM Gerd Hoffmann <kraxel at redhat.com> wrote: > > > > > 3) Need to be verbose on how the vring processing work in the commit log of > > > patch 1 > > > > Ecven better a file documenting the interface somewhere in > > Documentation/ > I put a uvirtio-vga.c

Hi, I had problems described in another thread so went from a start, but now have problems when loading qozap module. I get : # insmod qozap.ko ports=9 insmod: error inserting 'qozap.ko': -1 Unknown symbol in module and in /var/log/messages: module qozap unsupported by SUSE/Novell, tainting kernel. qozap: disagrees about version of symbol zt_receive qozap: Unknown symbol zt_receive

Hello, I hope someone can help me. I'm trying to get this all working without some stupid hack. So far no dice. Not sure if there is a new feature in CVS or something that might help. I'd appreciate any suggestions. Got a belkin F6C550-AVR. redhat FC3ish system libusb-0.1.8-3 nut-2.0.3-0.fc4.2 udev-039-10.FC3.8 Now first off while udev is nifty, but the whole usb udev subsystems were

Hi e, I am normally use gnome and would do the following to make my CD / DVD mount with exec gnome-mount --write-settings --device /dev/sdc0 -o exec What is the equivalent in KDE ? My initial research suggests that I actually have to write a custom udev rule to achieve this. This has led me as far as running udevinfo -q path -n /dev/scd0 udevtest /block/sr0 (the output is below) My