Displaying 3 results from an estimated 3 matches for "testbridg".
Did you mean:
testbridge
2004 Dec 23
1
PRI unable to request channel
...e been unable to fix this by restarting asterisk and zaptel, but
don't know whether it is a problem with the switch or the T1 card
(TE405P).
I have a channel in that state at the moment, and here is the output
from "pri intense debug span 1" when attempting to make an outgoing
call:
testbridge*CLI> pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (1)
> [ 00 01 01 03 ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (rec...
2007 Apr 18
0
[Bridge] Re: [VLAN] newbie problems
...interface. The physical interface is still connected to the cisco switch
with a single cable to a trunked port.
I'm pasting the configuration of this port:
interface GigabitEthernet0/1
switchport trunk native vlan 10
switchport mode trunk
no ip address
duplex full
Pasting bridgeinfo:
root@testbridge:~# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.000103bdb23b no eth0.4
eth0.40
(stp on/off have no diff)
Anyone got any good ideas? (design flaws?)
Posting this also t...
2010 Jun 16
0
H323 Trunk Problem calling from Asterisk to Avaya PBX
...dr = 10.101.4.224
> amaflags = AVAYA
> progress_setup = 8
> progress_alert = 8
> faststart = yes
> h245tunneling = yes
> gatekeeper = DISABLE
> disallow=all
> allow=g729
> allow=g723
> dtmfmode=rfc2833
> context=from-internal
> h323id=ObjSysAsterisk
> callerid=testbridge
> logfile=/var/log/asterisk/h323_log
>
> [Avaya]
> type=friend
> context=from-internal
> host=10.100.7.15
> port=1720
> disallow=all
> allow=g729
> allow=g723
> canreinvite=no
> dtmfmode=rfc2833
>
> Please help me find out why the call isn't going thro...