Displaying 3 results from an estimated 3 matches for "sipura1".
Did you mean:
sipura
2003 Dec 22
2
Sipura 2000 configuration.
...ine 1 with only
one small problem. But I can't get the line 2 working with asterisk.
Here are samples of my sip.conf and extensions.conf. If I disable line
1 I can then get line 2 working. Is there a sample configuration for
the Sipura to get both ports working with Asterisk.
Sip.conf
[lcs-sipura1]
context=main
username=lcs-sipura1
secret=XXXX
host=dynamic
canreinvite=no
nat=1
disallow=all
allow=ulaw
allow=alaw
;
[lcs-sipura2]
context=main
username=lcs-sipura2
secret=XXXX
host=dynamic
canreinvite=no
nat=1
disallow=all
allow=ulaw
allow=alaw
Extensions.conf
exten => 203,1,Dial(SIP/lcs-sip...
2005 May 30
2
Sipura 3000 dialing "noise"
Hi all,
We have several sipura 3000's working well for outbound calls, however
the issue we have is that when calls are sent to the Sipura with
Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately
and then proceeds with the call "in band" therefore sending dialing
sounds back to the caller. Other SIP gateways we have notably the
Vegastream and others do not do a SIP answer until the call is
successfully connected to the called party.
Any i...
2005 May 31
0
Sipura 3000 Analog Line No Answer, No Audio
...PA, ensure that port is 5061
and set context to from-pstn (disable voicemail & directory on this
extension).
In Trunks add a Sip trunk and copy the Outgoing block as follows (just
leave Incoming as it is - do not delete the any defaults, but you do
not need to change them either).:
Trunk name sipura1
context=from-pstn
fromuser=280 (or whatever extension you used)
host=IP address of you SPA (needs to be fixed IP)
port=5061
secret=your password
type=peer
username=280 (or whatever extension you used)
Inbound User context sipura1-in
Leave defaults in Inbound box and leave Register Strin...