Displaying 20 results from an estimated 87 matches for "sio1".
Did you mean:
sdo1
2009 Feb 25
1
7.1 reports serial ports disabled (but they work OK)
...g in
dmesg..
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
However the ports do work fin...
2008 Sep 15
1
sio => uart: one port is gone
...COM ports.
Recently (last Friday) I decided to update my RELENG_7 system and also
to transition from sio to uart.
This what I had before the upgrade:
kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags
0x10 on acpi0
kernel: sio0: type 16550A
kernel: sio0: [FILTER]
kernel: sio1: <16550A-compatible COM port> port 0x2e8-0x2ef irq 3 on acpi0
kernel: sio1: type 16550A
kernel: sio1: [FILTER]
This is what I have now:
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
This is what I have in device.hints for uart:
hint.uart.0.a...
2003 Apr 15
0
NVIDIA driver / internal modem irq conflict
...pci0
Apr 14 09:30:27 chapel-hill /kernel: sio0: moving to sio2
Apr 14 09:30:27 chapel-hill /kernel: sio2: type 16550A
Apr 14 09:30:27 chapel-hill /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10
on isa0
Apr 14 09:30:27 chapel-hill /kernel: sio0: type 16550A
Apr 14 09:30:27 chapel-hill /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Apr 14 09:30:27 chapel-hill /kernel: sio1: type 16550A
==========
Kernel probe info with NVIDIA (system locks up then modem accessed):
Method: just let it boot and load the nvidia.ko module:
Apr 14 09:32:26 chapel-hill /kernel: Preloaded elf module "agp.ko&...
2008 Sep 30
4
[FreeBSD] Fix for ServerWorks HT1000 in upcoming 7.1?
Hi,
I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which
I'd like to try installing FreeBSD. I've already failed to make 7.0
work on this box and was wondering if you have information about the
behavior of the upcoming 7.1 on this hardware.
I've been following the "HT1000 chipset errata saga" thread, and the
commits by sos@ to CVS (around Jan 2008), but have
2008 Nov 25
1
sio vs uart vs ucomm problems / differences
...compatible> on puc0
uart3: [FILTER]
the applications does not work. When its the sio driver, it works as expected
puc0: <Oxford Semiconductor OX16PCI954 UARTs> port
0xe520-0xe53f,0xe540-0xe55f mem
0xa0005000-0xa0005fff,0xa0006000-0xa0006fff irq 15 at device 17.0 on pci0
puc0: [FILTER]
sio1 on puc0
sio1: type 16550A
sio1: [FILTER]
sio2 on puc0
sio2: type 16550A
sio2: [FILTER]
sio3 on puc0
sio3: type 16550A
sio3: [FILTER]
sio4 on puc0
sio4: type 16550A
sio4: [FILTER]
Unfortunately, we only control the FreeBSD side of things and the
other end of the serial connection is a windows app...
2003 Oct 01
1
Upgrade to 4.8 STABLE - Root mount failed: 6
...flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O...
2008 Sep 05
1
Tripplite SMX1500XLRT2U through serial
...nect to SMX1500XLRT2U using serial cable shipped with UPS under
FreeBSD 6.3-STABLE and NUT 2.2.2 installed from ports. Unfortunately,
it looks like it couldn't be recognized.
%dmesg | grep sio
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ups.conf:
[tripplite]
driver = tripplite
port = /dev/cuad0
%/usr/local/libexec/nut/tripplite -a tripplite -DDDDD
Network UPS Tools - Tripp-Lite SmartUPS driver 0.8 (2.2.2)
debug level is '5'
Failed to find UP...
2003 Sep 06
0
Boot from CF stalls when mounting root
...f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port...
2003 Sep 29
3
Frequent reboots...
Hello,
I am having a problem with a new server running FreeBSD 4.9-PRERELEASE.
Once every two days or so, it reboots itself.. there is no exact time of the day it reboots..
It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today).
I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...
2003 Aug 09
0
USB problems (I/O-Error => USB da(4) quirks, uscanner0)
...2 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lp...
2008 Feb 29
1
FreeBSD 7.0 + Xen 3.1 + HVM: Success!
...irtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2793128576 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad0: 10240...
2003 Apr 07
0
strange crash
...oard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to deny, unlimited logging
ad0: 6204MB <ST36531A> [13446/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a...
2006 Mar 30
5
boot problem in HP Proliant ML370 G4
Hi,
I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4.
The problem is "-" appears on the screen and it never boots unless
somebody hits the
"Enter" key. Sometimes even PS2 keyboard doesn't respond during that
time. Tried with
USB keyboard, same problem.
The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic
(mpt-5.0.5.20.00 bios) LSI1030-IT
2003 Aug 03
0
Multiple kld loads?
...oard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interru...
2003 May 16
2
make installworld fails : touch not found ?
...(scbus & pass)
options ATA_STATIC_ID
device wdc0 at isa? port IO_WD1 irq 14
device wcd
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device pci
device agp
device miibus
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device ppc0 at isa? irq 7
device ppbus
device lpt
device plip
device ppi
o...
2006 May 09
0
MegaTech UPSilon 2000 usage
.....
Another thing: I really need your help because also the
/usr/local/ups/bin/upsdrvctl start does not exist.
With dmesg command I can see
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on...
2003 May 13
0
Health monitoring
...d controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
sm...
2003 Jul 17
1
device troubles after stable update
...tkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbu...
2003 Jul 27
2
SMP Problems with 4.8-RELEASE
...100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
# PCI Ethernet NICs that use the common MII bus controller co...
2008 Nov 30
1
panic: spin lock held too long on 7.1-PRERELEASE (sio)
...CPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib5
puc0: <Titan PCI-800H> port 0x5000-0x501f,0x5020-0x503f mem 0xfdff0000-0xfdff0fff,0xfdfe0000-0xfdfe0fff irq 78 at device 2.0 on pci6
puc0: [FILTER]
sio0 on puc0
sio0: type 16550A (multiport master)
sio0: [FILTER]
sio1 on puc0
sio1: type 16550A (multiport)
sio1: [FILTER]
sio2 on puc0
sio2: type 16550A (multiport)
sio2: [FILTER]
sio3 on puc0
sio3: type 16550A (multiport)
sio3: [FILTER]
puc1: <Titan PCI-800H> port 0x5040-0x505f,0x5060-0x507f mem 0xfdfd0000-0xfdfd0fff,0xfdfc0000-0xfdfc0fff irq 78 at device 2.1...