search for: resuced

Is it at all possible to chain load to another PXE server using pxelinux? I'm wondering because we are getting ready to roll out a new dedicated server provisioning system at the datacenter where I work. In the past we've used pxelinux to network boot the Linux installations (e.g. anaconda.) We also use it to network boot to rescue mode, memtest86, etc. But we are moving to a new

Hi I got a new Adaptec 6405 card with a set of new harddrives. Problem that I assumed that the card had kernel drivers, which it has but only from 2.6.39 onwards. I installed the kmod-aacraid drivers, they see the card and drives, fine. However, I need to get a "linux rescue" to work, thus I need to load the drivers during the boot of the resuce disk. How do I do this? thanks Jobst

I'm trying to build a SEM using the sem package. I'll attach my model specification below. When I turn debug=TRUE, it seems as if I'm getting to convergence because I get this message: Successive iterates within tolerance. Current iterate is probably solution. However, at the end of the process I get this message: Warning message: In sem.default(ram = ram, S = S, N = N,

On 10/30/2016 12:26 PM, Paul R. Ganci wrote: > <snip>I am thinking of putting the CentOS iso out and then booting the > VM into it just to poke around the file system. Otherwise my other > option is to just clone a twin VM on another server and then just > change the networking IPs/hostname. Anybody have any other ideas as to > how to debug this problem? So I booted off

Hello, When I call an action with some invalid XML or JSON data a parse exception gets raised from within Rails/Ruby (REXML or ActiveSupport::JSON). The problem that I''ve got is how to handle these exceptions. In my application_controller.rb I have the following for debugging purposes: def rescue_action_in_public(exception) respond_to do |request| request.all { render :text =>

Hi, I have been trying to install CentOS 5.4 on a Intel SR1530SHS, Intel S3200SH mainboard.. It has a 3 x 1TB sata hotswap drives with LSI software raid onboard. I had configured the LSI to have Sata0 and Sata1 with raid 1 and the third drive as a hotspare drive. Format the harddisk and installation was a breeze. The server rebooted into a blank screen and the cursor just keep blinking. Please

I'm still having conceptual trouble with this one. I have two PATA and two SATA disks in my home system. When the system comes up, these are, espectively, /dev/hda, /dev/hdb, /dev/sda and /dev/sdb. I have the boot order of the drives in the boot PROM set to boot from /dev/sda (hard drive 2), then /dev/hda (hd 0), and usually that works fine. /dev/sda is properly set up with the MBR and

A bit hard to say. Try chrooting into environment and rebuilding initrd? -- Eero 2016-10-30 22:53 GMT+02:00 Paul R. Ganci <ganci at nurdog.com>: > On 10/30/2016 12:26 PM, Paul R. Ganci wrote: > >> <snip>I am thinking of putting the CentOS iso out and then booting the VM >> into it just to poke around the file system. Otherwise my other option is >> to just

I removed an ATA drive (/home) for a new SATA and my system would not boot. I'm guessing that it put the MBR on that drive instead of the drive that holds the / partition. What's the best way confirm where the MBR resides and, after I verify that's my problem, how I can move (or make a copy) onto a different drive? Thanks, Scott

Hello, First off, I'm not sure if my problem is with my filesystem, or with my partition table, so this may or may not be the appropriate list for this question - if not, I'd appreciate being pointed to a more appropriate forum. My problem is that when trying to resize, copy or move my ext3 partition in parted, I get the following error: No Implementaion: this ext2 filesystem has a rather

so, Just chroot to mountpoint: http://www.cyberciti.biz/faq/unix-linux-chroot-command-examples-usage-syntax/ chroot /mounted/path /bin/bash and then .. mkinitrd (see man page for documentation) 2016-10-30 22:57 GMT+02:00 Eero Volotinen <eero.volotinen at iki.fi>: > A bit hard to say. Try chrooting into environment and rebuilding initrd? > > -- > Eero > > 2016-10-30

Any error in your host logs? On Sunday, 30 October 2016, Steven Tardy <sjt5atra at gmail.com> wrote: > > > On Oct 30, 2016, at 3:27 AM, Paul R. Ganci <ganci at nurdog.com > <javascript:;>> wrote: > > > > grub> set root=(hd0,msdos2) > > grub> linux (hd0,1)/vmlinuz-3.10.0-327.36.2.el7.x86_64 > root=(hd0,msdos2)/ > > grub> initrd