Displaying 20 results from an estimated 32 matches for "rc7k".
Did you mean:
rc7
2005 Mar 28
0
bristuff-0.2.0-RC7k: error on loading qozap : "qozap: Unknown symbol zt_xxxxx"
...udev/rules.d/50-udev.rules
echo "" >> /etc/udev/rules.d/50-udev.rules
echo zap/*:root:root:660 >> /etc/udev/permissions.d/50-udev.permissions
echo "" >> /etc/udev/rules.d/50-udev.rules
cd zaphfc/
wget http://www.junghanns.net/asterisk/downloads/bristuff-0.2.0-RC7k.tar.gz
tar zxvf bristuff-0.2.0-RC7k.tar.gz
cd bristuff-0.2.0-RC7k/
./download.sh
./compile.sh
#clearing SuSE deprecated SuSE modules
for module in /lib/modules/`uname -r`/misc/*; do rm -i
/lib/modules/`uname -r`/extra/$(basename $module); done
#Loading the drivers (quadBRI):
cd qozap
m...
2005 May 30
1
I865, HFC-S etc.
...r - it didn't work.
Solved by disabling APIC.
However, still the driver behaves a little bit strange.
If card 0 & 1 is TE and 2 is NT, TE works fine, but NT is not working at
all.
If card 0 is NT and 1 & 2 TE - all of them works fine.
When all in TE mode - works fine.
brustuff is 0.2.0-RC7k
Anybody knows what can be the reason ?
I used florz path - helped me to make zaphfc driver running with APIC turned
on. However NT mode didn't work @ all, maybe because of my asterisk was in a
different version than the florz path (RC7k , RC8a).
Putting bri_net_ptmp in config hanged up asteri...
2005 Oct 11
2
IAX or IAX2 ?
Hi,
I have read the wiki entries on IAX(2), but I'm afraid, it still have some
questions:
I have a working connection between two Asterisk-Servers (Asterisk
1.0.7-BRIstuffed-0.2.0-RC7k on Debian 3.1) via IAX.
Does this connection work with IAX or IAX2?
When I try to load chan_iax2.so, I get the error message
chan_iax2.so]Oct 11 10:09:52 WARNING[2288]: loader.c:258
ast_load_resource: /usr/lib/asterisk/modules/chan_iax2.so: undefined symbol:
ast_check_signature
Oct 11 10:09:5...
2006 Apr 05
2
chan_modem_i4l delay
Hi,
I currently use? Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k on a debian sarge with a kernel 2.4.27 on a P4 3Gig with 1Gig
of memory
When i use i4l on any call, the called party ( on the telco operator side ) ear me with a delay of 1 sec after 1
minutes , 2 sec after 3 minutes and so on...
After a quart hour, the delay make the c...
2005 Sep 23
2
ZAP ISDN losing digits
Hi all,
I got into a strange problem here. I've got an asterisk box with
bristuff-0.2.0-RC7k, and a HFC PCI ISDN card, running in NT mode.
The ISDN card is connected to a S0 bus and to a Siemens ISDN PBX. Two phones
are connected to the ISDN PBX and are successfully getting calls from the
asterisk box.
When dialling from one of the phones, the ZAP channel seems to be missing
out on some o...
2005 Apr 11
3
CDR and TDS
...ord the call log to my Microsoft SQL Server
using unixodbc and freetds....
but when I compile, I've got this message....
Does anyone have the same problem and/or know how to solve it ?
Thanks
Baste regards
David Masure
make[1]: Entering directory
`/usr/src/asterisk/bristuff-0.2.0-RC7k/asterisk-1.0.6/cdr'
gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes
-Wmissing-declarations -g -Iinclude -I../include -D_REENTRANT -D_
GNU_SOURCE -O6 -march=i686 -DZAPTEL_OPTIMIZATIONS
-DASTERISK_VERSION=\"1.0.6-BRIstuffed-0.2.0-RC7k\" -DINSTALL_PREFIX=\"
\" -DA...
2005 Oct 15
1
Problem with '#' key recognition
...k server acts as if I
have not.
I have installed the ztdummy module, and it seems that Asterisk is
picking it up OK (mainly since it's not moaning about permissions for
IAX timing any more).
I am using the Asterisk version that is packaged in Debian Stable
(Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k) and the call that goes out
expecting a '#' goes over an IAX provider to a UK mobile/landline.
I have Googled on the subject but can't seem to find anything useful. I
was wondering if anyone had any ideas or places to look before I start
tearing my hair out.
Thanks,
Colin
2006 May 03
1
Running applications when a queued call is answered
...application and wait 2 seconds while the caller
still heard ringing. Is there a way to do something similar when a
queued call is delivered? Maybe with AGI?
I've seen some recommendations to tail the logfile, but that seems
kludgey...
I'm currently using the "1.0.7-BRIstuffed-0.2.0-RC7k" Asterisk package
included with Debian 3.1 (Sarge), but I'd be happy to upgrade to a
newer version if that would help.
Thanks for any tips or ideas!
----Scott.
2005 Mar 24
2
rxfax trouble on bristuffed capi
Hi all,
My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls
over ISDN2.
Now I want to implement receiving incoming faxes into my setup so I did a
google and some reading on the wiki.
I got the spandsp 0.0.2pre10 package compiled and installed, patched
asterisk's apps makefile and compiled * again.
This al...
2005 Sep 08
1
Hangup problem
i have a box running debian sarge with asterisk installed from distribution
packages:
CLI> show version
Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by kk@nyx on a x86_64 running Linux
I have managed to configure a simple dialplan (the PBX task is quite simple as
this is a small office with just a few phones)
I have one Zap (PSTN) line connected to it and one SIP to a local provider.
After some googling most things seem to work well, b...
2006 Feb 19
3
Cisco 7905 can't register
My Cisco 7905 can't register with Asterisk (1.0.7-BRIstuffed-0.2.0-RC7k
on Debian stable). It could, however, register with another
installation of Asterisk and the settings on the phone (apart from the
SIP proxy address) haven't changed since then.
On the new Asterisk box my sip.conf contains this:
[jeremy]
type=friend
regexten=801
allow=g729
host=dynamic
se...
2005 Aug 26
4
system crash
We just had * crash on us - no calls could be made / received. We had to
kill -9 the * process.
Checking the error logs, I came across these two lines, with the times
matching the crash:
Aug 26 13:48:00 WARNING[19282] pbx.c: Local/6024@AgentQ-94ce,2 already
has PBX structure??
Aug 26 13:48:00 WARNING[19282] channel.c: Thread -1105359952 Blocking
'Local/6024@AgentQ-94ce,2', already
2005 Mar 24
1
voicemail problems with CVS-HEAD
Hello,
I have moved from Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k (debian pkg) to
CVS-HEAD, and realtime. Compiled no problem and now running, with
realtime extensions and sip users in postgres (ODBC connection) database,
trunking also works.
I have looked on google, wiki, and this mailing list, along with talking
to some peers, but to no avail.
My problem rev...
2005 Mar 28
1
Connecting quadbri to EuroISDN with 2 TE and 2 NT ports - what cables and settings ?
Hi,
I'm trying to connect quadbri between powered ISDN phone and ISDN line:
ISDN <---1---> TE - * - NT <--2--> Phone
I use quadbri, suse 9.2 and latest 0.2.0-RC7k bristuff. I've used sample
settings provided with package, but do get strange error (I think that I
have wrong setting for P2P or P2MP setting and cables 1 and 2).
If I connect phone to ISDN with straight cable it works. I've put quadbri in
between, and connected ISDN to span1 in TE mod...
2005 Jun 01
1
rxfax problems - cont.
...hirdcall = -1
Jun 2 00:10:41 DEBUG[16900]: chan_zap.c:2577 zt_setoption: Set option TDD
MODE, value: OFF(0) on Zap/10-1
Jun 2 00:10:41 DEBUG[16900]: chan_zap.c:1352 update_conf: Updated
conferencing on 10, with 0 conference users
-- Hungup 'Zap/10-1'
Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k
libspandsp-dev 0.0.2pre17-1
libspandsp0 0.0.2pre17-1
txfax/rxfax from spandsp-0.0.2pre18
Physical test fax is Panasonic KX-FT908PD connected to TDM400P FXS port
I also tried incomming fax through BRI interface - the same result, error
code 41 (on Panasonic)
Maybe someone meet this problem ?...
2005 Jun 27
2
R: zaphfc: empty HDLC frame or bad CRC received
...pt, load both modules manually (modprobe wcfxs zaphfc)
3) Issue the ztcfg command
4) Load asterisk
That way it worked without problems.
Julian J. M.
On 6/27/05, David Masure <d.masure@ucr.fr> wrote:
>
>
> Hi all,
>
> I'm using asterisk 1.0.6 with bristuff-0.2.0-rc7k. I've already set
> up 3 boxes with the same config, but I'm facing something strange with
> the fourth one :
>
> In my messages log, I've got thoses lines :
>
> 0xff).
> kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 13,
> stat = 0xf...
2005 Mar 11
0
Asterisk@home 0.6 + bristuff
How install bristuff in Asterisk@home ?
i tried version 0.2.Rca to last RC7k and when try to compile zaptel
(after patched it) i've this error:
make: *** [zaptel.o] Error 1
2005 Mar 23
1
Wilcard X100P doesn't hang up when in Voicemail() and calling party hangs up.
Asterisk 1.0.6-BRIstuffed-0.2.0-RC7k is installed
I have a x100p card and it doesn't detect a hangup from the calling
party when going in voicemail(). My PSTN provider is sending open loop
disconnect (voltage decrease for a given moment of time). Actually
Progress Detection is HIGHLY EXPERIMENTAL so it should not be required...
2005 Mar 29
1
HFC-S
Hi!
I have just installed Redhat 9 and Asterisk to my computer, and now i have
problems with my non-zaptel Card, I don't know how to set it up since all
instructions are for digium's hardware.
I have searched from the Internet for hours now, can you help me to understand
all this HFC-s thing and how it is related to CAPI, ISDN4Linux, bristuff and so
on.
I have to say that I am not so
2006 Apr 06
0
chan_modem_i4l delay again..
Hi,
I currently use Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k on a debian sarge with a kernel 2.4.27 on a P4 3Gig with 1Gig of memory
When i use i4l on any call, the called party ( on the telco operator side ) ear me with a delay of 1 sec after 1 minutes , 2
sec after 3 minutes and so on...
After a quart hour, the delay make the conversation just impossible...