search for: proton

Thanks Manuel.  I’m following that guide but am now stuck when checking to make sure the nut-sever and nut-client are up and working.  I got this: proton at proton:~$ service nut-server status nut-server.service - Network UPS Tools - power devices information server      Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)      Active: failed (Result: exit-code) since Tue 2020-08-11 22:13:42 EDT; 1min 18s ago     ...

> grep nut /etc/passwd nut:x:129:134::/var/lib/nut:/usr/sbin/nologin > In your manual test do you restore utility power after 3-5 seconds? Yes, I have tried that.  I have also tried less than one second.  I’ve tried for 1-2 minutes, for 3-5 minutes, I’ve tried just about every length of time and all appears Ok when I manually test. -- Todd Benivegna // todd at benivegna.com On Aug 5,

Ok guys, So we just had a storm roll through and of course we lost power for just a split second.  This time I was actually home for it.  Sure enough, the servers shutdown and wouldn’t boot all the way up until I restarted my Synology.  I grep’d the syslog and here’s the results: > proton at proton:~$ sudo grep upsmon /var/log/syslog > Aug  6 19:19:09 proton upsmon[1552]: UPS ups at 192.168.1.70 on battery > Aug  6 19:19:14 proton upsmon[1552]: UPS ups at 192.168.1.70 on line power > Aug  6 19:19:44 proton upsmon[1552]: UPS ups at 192.168.1.70: forced shutdown in progress &...

...…. Just stuck on getting the nut-server service starting automatically.  Got everything else working.  I’ve been able to get the nut-client starting up automatically at boot up (I had a missing “1” in upsmon.conf.  Oooops!)  However, I cannot get nut-server service to start-up automatically still. proton at proton:~$ service nut-server status nut-server.service - Network UPS Tools - power devices information server      Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)      Active: failed (Result: exit-code) since Tue 2020-08-11 23:43:55 EDT; 2min 0s ago     P...

On Thu, 6 Aug 2020, Todd Benivegna wrote: > ... I grep’d the syslog and here’s the results: Could you also grep for upsd and upsmon in the NAS log? Is this possible? > proton at proton:~$ sudo grep upsmon /var/log/syslog > Aug  6 19:19:09 proton upsmon[1552]: UPS ups at 192.168.1.70 on battery > Aug  6 19:19:14 proton upsmon[1552]: UPS ups at 192.168.1.70 on line power > Aug  6 19:19:44 proton upsmon[1552]: UPS ups at 192.168.1.70: forced shut...

...stuck on getting the nut-server service starting automatically.  Got everything else working.  I’ve been able to get the nut-client starting up automatically at boot up (I had a missing “1” in upsmon.conf.  Oooops!)  However, I cannot get nut-server service to start-up automatically still. > >proton at proton:~$ service nut-server status >nut-server.service - Network UPS Tools - power devices information server >     Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled) >     Active: failed (Result: exit-code) since Tue 2020-08-11 23:43:55 EDT; 2min...

...is probably due to a configuration error somewhere on my part. Here's what I have done so far. *APC Back-UPS NS 650M1 UPS* ---USB---> *Synology NAS (DS416 - Master?)* ---Ethernet---> *Netgear Managed Switch* w/ uplink to router <---Ethernet--- *Servers (Ubuntu 20.04 - Plex, Pulsar, Proton - All three set as slaves)* I have all three servers set as slaves, so is the Synology considered the master? Or do I need to set one of the servers as the Master? I've been under the impression that the Synology is the master, but have been unable to confirm this. So what I have done so fa...

Hey Timo, Thanks for the quick turnaround, once we have the test results I'll contact you again. Should I also include instructions on how to run the a self contained server with a dummy backend so you can independently verify our results? Leander Beernaert Proton AG ------- Original Message ------- On Thursday, February 23rd, 2023 at 8:59 PM, Timo Sirainen <timo at sirainen.com> wrote: > On 23. Feb 2023, at 16.13, Leander Beernaert <leander.beernaert at proton.ch> wrote: > >> Hey, >> >> We recently announced Gluon (http...

...were forced to let me go since there were no charges they could file against the victim of their horrible crimes and atrocities under color of law. And City Hall is still in the bedroom & bathroom business to boot. On February 24, 2023 2:29:41 AM EST, Leander Beernaert <leander.beernaert at proton.ch> wrote: >Hey Timo, > >Thanks for the quick turnaround, once we have the test results I'll contact you again. > >Should I also include instructions on how to run the a self contained server with a dummy backend so you can independently verify our results? > >Leander Be...

On 23. Feb 2023, at 16.13, Leander Beernaert <leander.beernaert at proton.ch> wrote: > > Hey, > > We recently announced Gluon (https://github.com/ProtonMail/gluon/) our IMAP server library we are using in Proton Bridge(https://github.com/ProtonMail/proton-bridge). We would love to have it have it listed in the IMAP Server Compliancy Status wiki page (htt...

...rs in the panel.  Anyways, the >> power was out for just a few seconds and of course my servers >> shutdown on me after power being out for just a second or two.  Here >> is my syslog from two different machines.  I included everything just >> in case. >> >> “Proton": https://hastebin.com/uluqaqetuc.bash >> "Plex”: https://hastebin.com/apudatonun.sql >> >> Let me know what you think.  I just tested everything over the >> weekend and it all worked perfectly; cut power and machines stayed up >> until it was time to shut...

Hey, We recently announced Gluon (https://github.com/ProtonMail/gluon/) our IMAP server library we are using in Proton Bridge(https://github.com/ProtonMail/proton-bridge). We would love to have it have it listed in the IMAP Server Compliancy Status wiki page (https://imapwiki.org/ImapTest/ServerStatus). What do we need to do or whom do we need to contact to...

...ichael p.s. dovecot -n # 1.2.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28-hardened-r9 i686 Gentoo Base System release 1.12.11.1 reiserfs log_path: /var/log/dovecot_err.log info_log_path: /var/log/dovecot_info.log protocols: imap pop3 imaps pop3s managesieve ssl_cert_file: /etc/dovecot/ssl/mail.proton-sss.ru.pem ssl_key_file: /etc/dovecot/ssl/mail.proton-sss.ru.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login lo...

...s probably due to a configuration error somewhere on my part.   Here's what I have done so far. > > APC Back-UPS NS 650M1 UPS ---USB---> Synology NAS (DS416 - Master?) ---Ethernet---> Netgear Managed Switch w/ uplink to router <---Ethernet--- Servers (Ubuntu 20.04 - Plex, Pulsar, Proton - All three set as slaves) > > I have all three servers set as slaves, so is the Synology considered the master?  Or do I need to set one of the servers as the Master?  I've been under the impression that the Synology is the master, but have been unable to confirm this. > > So what...

...o the master and > > everything else (including my Synology) to slaves.  Before I did that > > though, I timed the shutdown of my Synology since it is the slowest > > slave to shutdown.  It took 40 seconds to shutdown, so I changed > > HOSTSYNC in upsmon.conf on the master (“Proton”) to 60.  I then did a > > test ("sudo upsmon -c fsd”). The slaves shutdown, then eventually the > > master, but the Synology never powered down and the UPS powered off > > which cut the power to it while it was still on.  Anyone know what the > > heck is going on? >...

...ok out half the city; actually tripped most of the breakers in the panel.  Anyways, the power was out for just a few seconds and of course my servers shutdown on me after power being out for just a second or two.  Here is my syslog from two different machines.  I included everything just in case. “Proton":  https://hastebin.com/uluqaqetuc.bash "Plex”:  https://hastebin.com/apudatonun.sql Let me know what you think.  I just tested everything over the weekend and it all worked perfectly; cut power and machines stayed up until it was time to shut them down (I temporarily configured them to...

...e breakers in the panel.  Anyways, the > > power was out for just a few seconds and of course my servers shutdown > > on me after power being out for just a second or two.  Here is my > > syslog from two different machines.  I included everything just in case. > > > > “Proton": https://hastebin.com/uluqaqetuc.bash > > "Plex”: https://hastebin.com/apudatonun.sql > > > > Let me know what you think.  I just tested everything over the weekend > > and it all worked perfectly; cut power and machines stayed up until it > > was time to sh...

...e: > > On Fri, 7 Aug 2020, Todd Benivegna wrote: > > > > > APC Back-UPS NS 650M1 UPS ---USB---> Synology NAS (DS416 - Master?) > > > ---Ethernet---> Netgear Managed Switch w/ uplink to router <---Ethernet--- > > > Servers (Ubuntu 20.04 - Plex, Pulsar, Proton - All three set as slaves) > > > > I'm guessing that the UPS supplies only the NAS, not the 3 Ubuntu machines. Do > > they have their own UPS's? > > > > > I have all three servers set as slaves, so is the Synology considered the > > > master?  Or do...

...I can make my Linux act as ADS Domain Membership whit out any problem, When I made this command: /usr/local/samba/bin/net ads join "Computers" -U<usuario>%<clave> I get this message that tell me that everything is ok. Using short domain name -- DOMAIN2003 Joined 'PROTON' to realm 'DOMAIN2003.COM' I also have another PC with windows 2000, which is joined too, to my Windows 2003 Server. From my Linux I can connect with out any problem to this machine using "smbclient" and with no password. But when I try to connect form Windows 2000 to my Lin...

...y got a test in after I changed my RPi to the master and everything else (including my Synology) to slaves.  Before I did that though, I timed the shutdown of my Synology since it is the slowest slave to shutdown.  It took 40 seconds to shutdown, so I changed HOSTSYNC in upsmon.conf on the master (“Proton”) to 60.  I then did a test ("sudo upsmon -c fsd”). The slaves shutdown, then eventually the master, but the Synology never powered down and the UPS powered off which cut the power to it while it was still on.  Anyone know what the heck is going on?  I’m feeling a bit cursed, haha. -- Todd Be...