search for: pre16

I have put a compile hack in for older distros and pushed it out as syslinux-3.62-pre16; for those who have reported compilation problem on older distros I would greatly appreciate if you could confirm if it works now (it worked for me on a CentOS 3.9 VM.) -hpa

...uot; used in the above config > is actually renamed from > http://www.memtest.org/download/4.20/memtest86+-4.20.bin.gz Thanks for the details. I believe this is a result of how/where memtest wants to be loaded. I can confirm it's present in 5.11-pre9 but appears resolved for me in 6.02-pre16. I should be able to test in Workstation-9.0.2 tomorrow. -- -Gene

I upgraded from syslinux 4.x to syslinux 6.01 and am now having issues with pxe chaining. I've tried moving up as far as 6.02-pre16, but I'm still experiencing the same problem. The original config called the next server as follows: LABEL Cobbler KERNEL pxechain.com APPEND 10.x.x.x::pxelinux.0 Which worked for the previous version, but I started getting an error after the upgrade: Loading...

Hi all, I have finally gotten SYSLINUX 3.50 what it feels like feature-complete for release, or something pretty close to it. As a consequence, I am declaring 3.50-pre16 a release candidate. Here is what's news since 3.36: Changes in 3.50: * New keywords allow the type of file to be specified in the configuration file. * It is now supported to load a different configuration file with the CONFIG keyword. * Fix API ca...

On Fri, 02 Aug, at 07:51:12PM, Jonas Keidel wrote: > So will the patch be applied in 6.02? It's in 6.02-pre16. -- Matt Fleming, Intel Open Source Technology Center

...e Cumm <gene.cumm at gmail.com> wrote: > On Wed, Sep 18, 2013 at 4:09 PM, Chris Valentino > <chris.valentino at 1010data.com> wrote: >> I upgraded from syslinux 4.x to syslinux 6.01 and am now having issues with >> pxe chaining. I've tried moving up as far as 6.02-pre16, but I'm still experiencing the same problem. The original config called the next server as follows: > > What's the version of the first and second pxelinux.0? Are they both > 6.02-pre16? Using precompiled binaries from kernel.org without > running make? Tested the precompile...

...5 >=1 | reoffend$pre06 >=1] <- 'V' > pre_ <- new[reoffend$pre07 >=1 | reoffend$pre08 >=1 | reoffend$pre09 >=1| reoffend$pre10 >= 1 |reoffend$pre11 >=1 | reoffend$pre12 >=1 | reoffend$pre13 >=1| reoffend$pre14 >= 1 |reoffend$pre15 >=1| reoffend$pre16 >= 1 ] <- 'N' > pre_ <- new[reoffend$pre01111 | reoffend$pre012 | reoffend$pre013<=0] <-'O' > pre_ <- new[reoffend$pre02111<=0 | reoffend$pre02114<=0 | reoffend$pre2029<=0 | reoffend$pre0212<=0 | reoffend$pre0211 <=0] <-'O' &gt...

...r TFTP or HTTP, and then loading the install.img from HTTP.... ---------------- 6.03-pre11 BIOS: pxelinux.0: boota OK TFTP 6.03-pre12 BIOS: pxelinux.0: boots OK TFTP 6.03-pre13 BIOS: pxelinux.0: boots OK TFTP 6.03-pre14 BIOS: pxelinux.0: boots OK TFTP 6.03-pre15 BIOS: pxelinux.0: boots OK TFTP 6.03-pre16 BIOS: pxelinux.0: boots OK TFTP 6.03-pre17 BIOS: pxelinux.0: boots OK TFTP ---------------- 6.03-pre11 BIOS: lpxelinux.0: boots OK TFTP & HTTP 6.03-pre12 BIOS: lpxelinux.0: very slow compared to pre11. boots TFTP & HTTP 6.03-pre13 BIOS: lpxelinux.0: boots OK TFTP & HTTP 6.03-pre14 BIOS:...

-lwrap on NetBSD doesn't like not having some of its global variables defined, so linking it to anything but sshd is bad. This patch fixes Makefile.in and configure/configure.in to make this work. Thanks, David --- configure.orig Tue Dec 7 01:10:51 1999 +++ configure Wed Dec 8 12:46:12 1999 @@ -2242,7 +2242,7 @@ #define LIBWRAP 1 EOF - LIBS="$LIBS -lwrap" +

...e install.img from HTTP.... > ---------------- > 6.03-pre11 BIOS: pxelinux.0: boota OK TFTP > 6.03-pre12 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre13 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre14 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre15 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre16 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre17 BIOS: pxelinux.0: boots OK TFTP > ---------------- > 6.03-pre11 BIOS: lpxelinux.0: boots OK TFTP & HTTP > 6.03-pre12 BIOS: lpxelinux.0: very slow compared to pre11. boots TFTP & HTTP > 6.03-pre13 BIOS: lpxelinux.0: boots OK TFTP &a...

...e install.img from HTTP.... > ---------------- > 6.03-pre11 BIOS: pxelinux.0: boota OK TFTP > 6.03-pre12 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre13 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre14 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre15 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre16 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre17 BIOS: pxelinux.0: boots OK TFTP > ---------------- > 6.03-pre11 BIOS: lpxelinux.0: boots OK TFTP & HTTP > 6.03-pre12 BIOS: lpxelinux.0: very slow compared to pre11. boots TFTP & HTTP > 6.03-pre13 BIOS: lpxelinux.0: boots OK TFTP &a...

2013/8/5 H. Peter Anvin <hpa at zytor.com> > On 08/05/2013 05:37 AM, Jonas Keidel wrote: > > I have problems with the current syslinux (6.02-pre16) booting CentOS 6.4 > > 64bit via LOCALBOOT 0 with the Intel DX79TO. > > Did it work in previous versions? > As i have written, in every previous syslinux version it didn't work. > > Also in every previous version there is problem exiting the pxe-stack. It > > boot...

...hang machines too. > > > > I've tried 6.02 and 6.03-pre13 (and a load in between) - all with no success. All this has been tried with and without a menu. All tried in VMWare workstation and with a couple of different physical machines. I just tried OEL 6.5 and 6.3 on pxelinux 6.0.3-pre16. Loads vmlinuz, loads initrd.img and then catches a server fault. Yet Fedora 20 loads fine. This is on VMWare workstation. I'll try on physical server / physical PXE server in a few days (once I have access again). > The support for chaining another EFI isn't complete yet, > unfo...

I tried isolinux 3.10-pre20 on an Acer Aspire 1501LMi notebook and a Shuttle FS-40 desktop box; it fails on both, simply hanging after printing the first line. Last known good version is 3.10-pre16; will try pre17-pre19 when I have some time.

I have problems with the current syslinux (6.02-pre16) booting CentOS 6.4 64bit via LOCALBOOT 0 with the Intel DX79TO. Also in every previous version there is problem exiting the pxe-stack. It boots again from bios. With LOCALBOOT -1 it works, but that is not the target. Can you please advice or look at that?

On Wed, Sep 18, 2013 at 4:09 PM, Chris Valentino <chris.valentino at 1010data.com> wrote: > I upgraded from syslinux 4.x to syslinux 6.01 and am now having issues with > pxe chaining. I've tried moving up as far as 6.02-pre16, but I'm still experiencing the same problem. The original config called the next server as follows: What's the version of the first and second pxelinux.0? Are they both 6.02-pre16? Using precompiled binaries from kernel.org without running make? > LABEL Cobbler > KERNEL pxechain....

...cted more information. > > * USB boot is working with the 6.03 final release > * we have tried multiple 6.03 pre releases. Below the results > pre9 - pre11 not working > pre12 working > pre13 not working > pre14 - pre16 working > pre17 - final not working > * I've created a pcap file while booting the HP T5540 client. The tftp > server will deliver the pxelinux.0 file. After this tftp transfer I > will see a error in the pcap file. > Unknown (0xcc32) [ETHERNET FRAME CHE...

...rver using the setup described in message #10 here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=720589#10 I'm running this inside VMWare 9 - switching between x86 and x86_64 to check both EFI32 and EFI64, and then another non efi VM for bios. issue #1: I can only get this working on 6.02-pre16 and before back to 6.01-pre2, but definitely not working for me on the latest precompiled 6.02 zip & tar.gz. 6.02 seems to produce the same behaviour as this discussion - http://www.syslinux.org/archives/2013-June/020195.html (i checked packet capture, it changes port as described in the posts...

...directory has libcom32.c32, libutil.c32. > Tried manually loading libgpl.c32? Loading libgpl.c32 manually doesn't make a change. > > > boot: memtest > > Loading memtest86+.bin... ok > > Booting kernel failed: Bad file number > > This works in 6.02-pre16. > 5.01 worked for me in the past. I can't tell if reinstalling XP from scratch, or something else, broke it. I was considering installing a newer syslinux version. But it seems 5.01 is the last version for which there are premade binaries for XP. I never built syslinux from source....

I've tested it with the ASUS P9D-WS board. I installed Fedora 19 in EFI-mode on SSD and booted after that in EFI-PXE with syslinux 6.02-pre16. I do: LOCALBOOT and then the system doesn't start, just the bios-screen is shown up. Any thought about that? 2013/8/5 Matt Fleming <matt at console-pimps.org> > On Fri, 02 Aug, at 07:51:12PM, Jonas Keidel wrote: > > So will the patch be applied in 6.02? > > It's in...