search for: pre14

...booting from DHCPD & TFTPD-hpa on Centos 6 x64 all booting RHEL7 kernel/initrd over TFTP or HTTP, and then loading the install.img from HTTP.... ---------------- 6.03-pre11 BIOS: pxelinux.0: boota OK TFTP 6.03-pre12 BIOS: pxelinux.0: boots OK TFTP 6.03-pre13 BIOS: pxelinux.0: boots OK TFTP 6.03-pre14 BIOS: pxelinux.0: boots OK TFTP 6.03-pre15 BIOS: pxelinux.0: boots OK TFTP 6.03-pre16 BIOS: pxelinux.0: boots OK TFTP 6.03-pre17 BIOS: pxelinux.0: boots OK TFTP ---------------- 6.03-pre11 BIOS: lpxelinux.0: boots OK TFTP & HTTP 6.03-pre12 BIOS: lpxelinux.0: very slow compared to pre11. boots T...

I just tried to build syslinux-3.71-pre14-5-gfa6a60e and got the following: make[1]: Leaving directory `/syslinux/syslinux-3.71-pre14-5-gfa6a60e/dos' make[1]: find-mingw.sh: Command not found make[1]: Entering directory `/syslinux/syslinux-3.71-pre14-5-gfa6a60e/win32' gcc -Wp,-MT,syslinux.o,-MMD,.syslinux.o.d -W -Wall -Wno-sign-co...

...ferent directories) > all booting RHEL7 kernel/initrd over TFTP or HTTP, and then loading the install.img from HTTP.... > ---------------- > 6.03-pre11 BIOS: pxelinux.0: boota OK TFTP > 6.03-pre12 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre13 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre14 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre15 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre16 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre17 BIOS: pxelinux.0: boots OK TFTP > ---------------- > 6.03-pre11 BIOS: lpxelinux.0: boots OK TFTP & HTTP > 6.03-pre12 BIOS: lpxelinux.0: very s...

...-hpa on Centos 6 x64 > all booting RHEL7 kernel/initrd over TFTP or HTTP, and then loading the install.img from HTTP.... > ---------------- > 6.03-pre11 BIOS: pxelinux.0: boota OK TFTP > 6.03-pre12 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre13 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre14 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre15 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre16 BIOS: pxelinux.0: boots OK TFTP > 6.03-pre17 BIOS: pxelinux.0: boots OK TFTP > ---------------- > 6.03-pre11 BIOS: lpxelinux.0: boots OK TFTP & HTTP > 6.03-pre12 BIOS: lpxelinux.0: very s...

...een pretty quiet, so as soon as Ady and Matt have tested this one and confirmed that the disabled entry bug is finally gone I'll do the final release. And in case anyone missed it, the release can be grabbed here, http://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/4.06/syslinux-4.06-pre14.tar.bz2 http://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/4.06/syslinux-4.06-pre14.zip --- Geert Stappers (1): README: document the need for /usr/include/uuid/uuid.h Matt Fleming (1): menu: Disallow navigation to a disabled entry via *any* key Sebastian Herbszt (2):...

Hello. I've been testing pxelinux.0 (4.04-pre14) on some laptops: - HP EliteBook 6930P with BIOS F.18. - HP EliteBook 8440P with BIOS F.06. - Dell Latitude E4310 with BIOS A06. When booting pxelinux.0, the machines first display some random letters in different colors and then reboot. We've been using 4.02 for some time without problems....

If there is anything that you think should have been in Syslinux 4.04 which isn't there please holler now. -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.

>> Hi, >> >> We have some problems while network booting thin clients. The type is T5540. >> >> At this moment we are using pxe linux 6.03. >> >> The systems are booting correctly with pxe linux version 6.03-pre14. >> We have seen the same error with version 6.03-pre9. >> >> The error message: >> >> Failed to load ldlinux.c32 >> Boot failed: press a key to retry, or wait for reset... >> >> Any idea? >> >> Willem >> ____________________________...

> Message: 3 > Date: Fri, 06 Jun 2014 08:13:36 -0700 > From: "H. Peter Anvin" <hpa at zytor.com> > To: Andrew Rae <A.M.Rae at leeds.ac.uk>, "'syslinux at zytor.com'" > <syslinux at zytor.com> > Subject: Re: [syslinux] EFI booting over network - can't then load > anything > Message-ID: <5391DAA0.2050207 at

...the serial console port, which is the primary bios console. I've tried different configurations with setting serial in the config file, but no change (though I dont even thing it's getting to reading the config file, see below). I've confirmed that I experience the same symptoms at 2.20-pre14 and all versions above. I did not test any version before that as I need to use extlinux. Enough with the setup, on to the show: The system boots fine and loads the code off sector 0 without fail. It displays (for example) SYSLINUX 2.20 2.20-pre14 Then does nothing. I dont even get the copyright...

So it turns out that -pre13 was quite buggy after all. Once I started running the list of tests that I described in my email, a bunch of those bugs came to heed. Now I think I've fixed them, and so have released -pre14. I have also formally decided to call the final release 3.00 when it's ready. Between code base rewrite + EXTLINUX + libcom32 + simple menu, there is plenty of reason to bump the major version number. Yes, libcom32 was introduced a little bit ago, but only with the simple menu system has...

...argeman wrote: > >> Hi, > >> > >> We have some problems while network booting thin clients. The type is T5540. > >> > >> At this moment we are using pxe linux 6.03. > >> > >> The systems are booting correctly with pxe linux version 6.03-pre14. > >> We have seen the same error with version 6.03-pre9. > >> > >> The error message: > >> > >> Failed to load ldlinux.c32 > >> Boot failed: press a key to retry, or wait for reset... > >> > >> Any idea? > >> > &gt...

...nux.sys with syslinux 6's COM32R modules. Fair enough. Now, I need to know how strong this "versions *must* match" requirement is when dealing with different versions of syslinux 6.x. E.g. * MBR and ldlinux.sys installed by syslinux 6.03-pre1 * all *.c32 modules installed by 6.03-pre14 Has this a chance to work? Of course, feel free to ask me to just try myself. Still, assuming this currently works fine, it would be good to know to what extent such incompatibilities are likely to happen in the future, when mixing bits of different versions of the 6.x branch. Can anyone make a...

I have addressed all the issues that I know about (including, hopefully, the isohybrid version dependence...). I would like to release this this week so please let me know as soon as possible if this version is "go". -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.

I get this error trying to compile current git: nasm -O9999 -f elf -g -F stabs -DDATE_STR="'0x484e9ecd'" \ -DHEXDATE="0x484e9ecd" \ -l pxelinux.lsr -o pxelinux.o pxelinux.asm pxelinux.asm:2693: fatal: unable to open include file `pxeidle.inc' make[1]: *** [pxelinux.o] Fehler 1 - Sebastian

This version fixes the "PXELINUX reboots immediately on error" problem. This actually turned out to be due to a NASM bug; I have changed the code slightly to avoid the problem. Please, people, test this out so I can release a final... ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/ -hpa

This release includes Murali's menu positioning patch; it is otherwise identical to 2.09-pre13. I will release this as 2.09 on Sunday unless I hear objections. Note that I've effectively been out of the loop, moving houses, for almost a month, so if there is something I'm forgetting please tell me... -hpa

It really turned out not to be all that hard to do, after all. I definitely feel a bit silly, but there you have it. Please test this out as 3.50 really is way overdue to get out the door. -hpa

I have pushed out what I hope to be the last release candidate for Syslinux 4.04. Please test it if you have the chance as I would like to have 4.04 out as soon as possible. -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.

Hi, After fixing the --with-tcp-wrappers problem I decided to look closer at configure.in and found that --with-md5-passwords didn't work either. This patch fixes both problems (remember to run autoconf.) diff -ur openssh-1.2pre14.orig/configure.in openssh-1.2pre14/configure.in --- openssh-1.2pre14.orig/configure.in Mon Nov 22 06:11:05 1999 +++ openssh-1.2pre14/configure.in Mon Nov 22 20:21:53 1999 @@ -284,7 +284,7 @@ ) dnl Check whether user wants TCP wrappers support -AC_ARG_WITH(skey, +AC_ARG_WITH(tcp-wrappers, [ -...