search for: pcib4

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello All, I have had a problem detecting the network card on my notebook when ACPI is enabled for a year. The problem still exists in 7.1-RELEASE. with ACPI: ... bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8 bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). bge0: couldn't

...attached bge3: Ethernet address: 18:03:73:fd:9e:35 pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.0 on pci0 pcib3: domain 0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: no prefetched decode pci4: <ACPI PCI bus> on pcib3 pci4: domain=0, physical bus=4 pcib4: <ACPI PCI-PCI bridge> irq 53 at device 2.2 on pci0 pcib0: allocated type 4 (0xf000-0xffff) for rid 1c of pcib4 pcib0: allocated type 3 (0xd9000000-0xd9ffffff) for rid 20 of pcib4 pcib4: domain 0 pcib4: secondary bus 3 pcib4: subordinate bus 3 pcib4: I/O decode...

...ded elf kernel "kernel" at 0xc0541000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00f5380 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0 pci1: <PCI bus> on pcib4 pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc800-0xc83f mem 0xfe800000-0xfe8fffff,0xfeafb000-0xfeafbfff...

...cib2 em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xe000-0xe01f mem 0xf7e20000-0xf7e3ffff,0xf7e00000-0xf7e1ffff irq 16 at device 0.0 on pci2 em0: Using an MSI interrupt em0: [FILTER] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.4> port 0xd040-0xd07f mem 0xf7d20000-0xf7d3ffff,0xf7cc0000-0xf7cfffff irq 16 at device 0.0 on pci4 em1: [FILTER] em2: <Intel(R) PRO/1000 Legac...

...ASIC rev. 0x105> mem 0xfcf00000-0xfcf0ffff irq 13 at device 8.0 on pci3 bge1: Ethernet address: 00:06:5b:8d:20:5f miibus1: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard IOAPIC #1 intpin 14 -> irq 16 pci4: <PCI bus> on pcib4 pcib8: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on pci4 IOAPIC #1 intpin 15 -> irq 17 pci5: <PCI bus> on pcib8 pci5: <unknown...

...ASIC rev. 0x4101> mem 0xdd200000-0xdd20ffff irq 5 at device 0.0 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:15:60:5f:66:ff pcib4: <PCIBIOS PCI-PCI bridge> irq 5 at device 6.0 on pci0 pci4: <PCI bus> on pcib4 pcib5: <PCIBIOS PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 0.1 (no driver attached) pcib6: <PCIBIOS PCI-PCI bri...

...llocate 1 MSI vectors (1 supported) Sep 20 15:40:31 rmbp kernel: msi: routing MSI IRQ 265 to local APIC 0 vector 62 Sep 20 15:40:31 rmbp kernel: hdac1: using IRQ 265 for MSI Sep 20 15:40:31 rmbp kernel: hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 Sep 20 15:40:31 rmbp kernel: pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0 Sep 20 15:40:31 rmbp kernel: pcib0: allocated type 3 (0xc1a00000-0xc1afffff) for rid 20 of pcib4 Sep 20 15:40:31 rmbp kernel: pcib0: allocated type 3 (0xc1800000-0xc18fffff) for rid 24 of pcib4 Sep 20 15:40:31 rmbp kernel: pcib4: domain...

I'm experiencing similar problems with a 3C996-T under 4.8-REL. In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads to some interesting situations: I can do simple pings across the link, but ssh fails, and heavy pings crash the 4.8 machine. Similarly changing the interface configuration with ifconfig tends to crash the 4.8 machine (mtu, link0, up/down, etc). The

...7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3 em1: Using MSIX interrupts with 3 vectors em1: Ethernet address: 00:25:90:75:c8:08 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7823000-0xf78233ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> mem 0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19 at device 3.0 on pci4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus...

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

...ned 6 Timecounter "PIIX" frequency 3579545 Hz chip0: <Intel 82371AB Power management controller> port 0x1240-0x124f at device 15.3 on pci0 pcib2: <Intel 82454NX PCI Expander Bridge> at device 18.0 on pci0 pcib3: <Intel 82454NX PCI Expander Bridge> at device 19.0 on pci0 pcib4: <Intel 82454NX PXB#0, Bus#B> on motherboard pci4: <PCI bus> on pcib4 pcib5: <IBM 82351 PCI-PCI bridge> at device 1.0 on pci4 pci5: <PCI bus> on pcib5 ida0: <Compaq Smart Array 3200 controller> port 0x4000-0x40ff mem 0xc6ef0000-0xc6ef00ff irq 15 at device 0.0 on pci5 i...

...to bge1: Ethernet address: 00:16:35:05:b6:dc bge1: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 pci4: <ACPI PCI bus> on pcib3 ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4 ciss0: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci5: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib5 puc0: <Titan PCI-800H> port 0x5000-0x501f,0x5020-0x503f mem 0xfdff0000-0xfdff0fff,0xfdfe0000-0xfdfe0fff irq 78 at...

I sent an email out to freebsd-net without a response, soo this is my last attempt at getting any assistance here. I have a QLE3142-CU-CK (rebranded NetXen NX3-20GCU w/ NX3031 chipset) with no driver support in *BSD from anything I saw. I came across solaris's ntxn driver which seems to work appropriately but I have no use for solaris as a host o/s. Naturally I'll attempt at trying to get

...n miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:15:f2:2c:c3:86 pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 0.1 on pci2 pci4: <ACPI PCI bus> on pcib4 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS...

...8d:83 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7c24000-0xf7c243ff irq 16 at device 26.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 usbus0: EHCI version 1.0 usbus0: <EHCI (generic) USB 2.0 controller> on ehci0 usbus0: bpf attached ehci0: usbpf: Attached pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: no prefetched decode pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4...

...bit Ethernet> mem 0xeff00000-0xeff0ffff irq 18 at device 8.0 on pci5 bge1: Ethernet address: 00:06:5b:f3:09:7e miibus1: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib4: <Host to PCI bridge> on motherboard IOAPIC #1 intpin 14 -> irq 19 pci6: <PCI bus> on pcib4 pcib10: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on pci6 IOAPIC #1 intpin 15 -> irq 20 pci7: <PCI bus> on pcib10 pci7: <unknown card> (vendor=0x9005,...

...tel 82371AB Power management controller> port > > 0x1240-0x124f at device 15.3 on pci0 > > pcib2: <Intel 82454NX PCI Expander Bridge> at device 18.0 > on > > pci0 > > pcib3: <Intel 82454NX PCI Expander Bridge> at device 19.0 > on > > pci0 > > pcib4: <Intel 82454NX PXB#0, Bus#B> on motherboard > > pci4: <PCI bus> on pcib4 > > pcib5: <IBM 82351 PCI-PCI bridge> at device 1.0 on pci4 > > pci5: <PCI bus> on pcib5 > > ida0: <Compaq Smart Array 3200 controller> port > > 0x4000-0x40ff mem 0x...

...ge, ATA> at device 15.1 (no driver attached) pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 2.0 on pci2 pci3: <PCI bus> on pcib3 IOAPIC #1 intpin 11 -> irq 20 IOAPIC #1 intpin 8 -> irq 21 pcib4: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib4 IOAPIC #1 intpin 10 -> irq 22 amr0: <LSILogic MegaRAID> mem 0xf0000000-0xf3ffffff irq 22 at device 0.0 on pci4 amr0: <LSILogic MegaRAID Enterprise 1600> Firmware G170, BIOS F316, 64MB RAM pci3: <mass stor...

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

....6> port 0x3000-0x303f mem 0xdd300000-0xdd31ffff irq 54 at device 2.0 on pci3 em0: Ethernet address: 00:30:48:2e:99:ba em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x3040-0x307f mem 0xdd320000-0xdd33ffff irq 55 at device 2.1 on pci3 em1: Ethernet address: 00:30:48:2e:99:bb pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 pci5: <ACPI PCI bus> on pcib5 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16 at device 29.0 on pci0...