search for: mustek

NUT recently stopped working on my debian. I'm not sure which upgrade broke it. ups.conf: [mustek] driver = megatec port = /dev/ttyS0 desc = "mustek ups" # upsd -DDDD Network UPS Tools upsd 2.4.1 listen_add: added ::1:3493 listen_add: added 127.0.0.1:3493 setuptcp: try to bind to 127.0.0.1 port 3493 listening on 127.0.0.1 port 3493 setuptcp: try to bind to :...

Disclaimer: I've setup APC UPS monitoring and it works... ... but when it comes to mustek powermust 600usb (connected via com-port), I can't make it work. Got NUT installed via aptitude in ubuntu feisty and a basic setup, exactly the same as for the apc, except for the name of the ups and the corresponding section of ups.conf -- [mustek] driver = megatec port = /dev/...

Markus Layr wrote: >Hi, > >thanks for the mustek driver for the nut packages. >It works nearly perfect for my Mustek PowerMust USV 2000VA. > >There is only a little problem concering the battery.charge, perhaps you >can help me to solve it. > >I always get 100.0 as value for the battery.charge, it never changes. > >Regards...

...p. A year ago I came across this project and didn`t find my model on the list. I lost interest because of this but now a year later I thought: "hey, let`s look again" - but still not being listed..... On the PowerWalker website, I read that the person behind that company was related to Mustek before - so I thought, that there is a chance that the PowerWalker is a rebranded Mustek. I downloaded the source and grepped it for "mustek" and saw: hey, there is a driver - so I gave it a try and it really seems that my UPS is a re-branded Mustek. with the mustek driver - upsc gives:...

...p. A year ago I came across this project and didn`t find my model on the list. I lost interest because of this but now a year later I thought: "hey, let`s look again" - but still not being listed..... On the PowerWalker website, I read that the person behind that company was related to Mustek before - so I thought, that there is a chance that the PowerWalker is a rebranded Mustek. I downloaded the source and grepped it for "mustek" and saw: hey, there is a driver - so I gave it a try and it really seems that my UPS is a re-branded Mustek. with the mustek driver - upsc gives:...

...d 0665:5161" show? > Also, what OS and kernel are you using? (I thought certain kernels had USB-to-serial drivers for that chip.) > -- > Charles Lepple > clepple at gmail I don't know whether someone needs help with this or not anymore, however I had a similar problem with a Mustek 848 LCD UPS and the solution was easier than I thought: there was no need to load the cypress_m8 module, because, at least on the systems that I've tried (Ubuntu 12.04 and an Openwrt i386 build), using the blazer_usb module, the first serial console was being used to communicate with the UPS an...

...some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less "mustek" and more "megatec protocol", which can be seen in the attached patch. If this is ok, I can rebuild the patch with the other changes necessary for this (rename powermust and change the docs and manpage). Carlos Rodrigues -------------- next part -------------- diff -ruN nut.ori...

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually w...

Hi, I'm trying to setup my Mustek 600 with USB (no serial ports on my computer) on Gentoo. The configuration I use is: [Mustek] driver = megatec_usb port = auto desc = "Power Mustek 600 USB" The NUT I use on my x86_64 machine is: sys-power/nut-2.4.3-r2 USE="bash-completion ssl usb xml -cgi -hal -snmp" W...

"mustek" is all but deprecated, so the effort should be to get powermust/megatec working. Since you have the latest development code installed, can you please run "/path/to/megatec -DDDD -a the_name_for_your_ups" (this without starting NUT normally - i.e. without upsd, upsmon, etc) and send...

...but 2.2.0 soon) and most of all the new megatec driver. 2007/6/10, esva2 at inbox.lv <esva2 at inbox.lv>: > Dear "Network UPS Tools" developers, > > Sorry for this mail, but we have some question! > Maybe you can help us. Did you product "NUT" supported "Mustek > PowerMust 800VA" UPS??? We have some problem with this model. All work fine > but when we start > use "upsmon" it don't shutdown our server correct. First halted UPS > and our server don't have time to start "shutdown -h +0". > > We use "mus...

Hi there I have a Mustek PowerMust 1000 USB using serial port /dev/ttyS0. I use nut 2.2.1 with the megatec driver on Debian Lenny (testing), running on an AMD64 X2. (I was using a Debian Etch as slave, but to keep it simple I turned it off) My problem is that sometimes the UPS is running OK, but when the message "UP...

Hello, We are using the equipment "MUSTEK PowerMust 3000 NetGuard RM". That is using Megatec protocol. But unfortunately not all the data can be viewed correctly when dumping from utility "upsc". For example: upsbox# upsc mustek at localhost battery.voltage: 108.00 battery.voltage.nominal: 96.0 driver.name: megatec driver...

Hi all, I'm thinking buying a UPS Mustek PowerMust 600 USB to shutdown a Linux box on case of power failure. Can I use nut with this UPS without problems? I checked the page http://www.vamos-wentworth.org/upsinfo.html and was only something (incomplete) about Powermust 400 (information from November 2005). Could this be already changed?...

Dears, I have centos 5.5 with kernel 2.6.18 UPS: Mustek PowerMust 2000VA USB I trying to setup monitoring for this ups, I connect ups with server via COM port and USB. But here is the problem (with megatec_usb): [root at optimus ups]# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools 2.2.0- - Megatec pro...

...ioth.debian.org [mailto:nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org] On Behalf Of Vladimir Micovic Sent: Saturday, October 30, 2010 8:00 PM To: nut-tracker at lists.alioth.debian.org Subject: Problem with starting nut Dears, I have centos 5.5 with kernel 2.6.18 UPS: Mustek PowerMust 2000VA USB I trying to setup monitoring for this ups, I connect ups with server via COM port and USB. But here is the problem (with megatec_usb): [root at optimus ups]# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools 2.2.0- - Megatec pro...

On Feb 2, 2008 10:16 AM, Luki <looky at poczta.fm> wrote: > Hello Carlos > > could you please help me to solve issue with Mustek 1000VA UPS under > Freebsd ? > I am not able to connect with it : > > >Network UPS Tools - UPS driver controller > >Network UPS Tools - Megatec protocol driver 1.5.4 [megatec] > >Carlos Rodrigues (c) 2003-2007 > > >Megatec protocol UPS not detected. > &g...

On 10/30/2017 03:19 PM, Alexa Catalin wrote: > System: Cenots Linux 6.9 > Application: nut-2.7.5-0.20170613gitb1314c6? [with usb 0.1 from distro] > Device:??Mustek PowerMust 1060 LCD > Comunication log file: dump.txt > > We are looking at the possibility of successful communicating with > this device UPS?Mustek PowerMust 1060 LCD. > > PS: wolfy on the list gives me assistance and i can install any new > compiled nut version from sources...

...being an USB UPS), so I did i. sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - Megatec protocol driver 1.5 (2.0.5) Carlos Rodrigues (c) 2003-2006 Megatec protocol UPS not detected. Driver failed to start (exit status=1) ----- sudo /lib/nut/megatec -DD -a mustek Network UPS Tools - Megatec protocol driver 1.5 (2.0.5) Carlos Rodrigues (c) 2003-2006 debug level is '2' Starting UPS detection process... Attempting to detect the UPS... Sending "Q1" command... Wrong answer to "Q1" command. Attempting to detect the UPS... Sending &quo...

On 2/27/07, Markus Layr <tuxian@yahoo.de> wrote: > do you now if there is a possibility to get an connection betwenn nut an > the Mustek PowerMust 2000VA via USB? > I tried if with newhidups but I always got "No matching HID UPS found". In the latest development version of NUT there's a new driver called "megatec_usb" that may support your UPS. If it doesn't, support may be added if you care to help w...