search for: mpt0

Hello, I think this needs a few more eyes: http://lists.freebsd.org/pipermail/freebsd-scsi/2009-January/003782.html In short, writes are slow, likely do to the write-cache being enabled on the controller. The sysctl used in 6.x to turn the cache off don't seem to be in 7.x. Thanks, Charles ___ Charles Sprickman NetEng/SysAdmin Bway.net - New York's Best Internet - www.bway.net

...r model is HP DL 140.My 'uname -a' is: web# uname -a FreeBSD web.xxxxx.com 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Mon Feb 20 09:16:50 EST 2006 root@web.gltcall.com:/usr/obj/usr/src/sys/GENERIC i386 web# dmesg is attached.Any advice on what is happening ? Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc06e8 Timed out. Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bbf478 Timed out. Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc02d8 Timed out. Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc0080 Timed out. Mar 11 13:00:52 web kernel: mpt0: Attempting to Abort Req 0xc4bbfdd8 Mar 11...

I''m looking at the newly-orderable (via Sun) STEC Zeus SSDs, and they''re outrageously priced. http://www.stec-inc.com/product/zeusssd.php I just looked at the Intel X25-E series, and they look comparable in performance. At about 20% of the cost. http://www.intel.com/design/flash/nand/extreme/index.htm Can anyone enlighten me as to any possible difference between an STEC

...ld server with build 58 and a zfs scratch filesystem. When trying to upgrade to build 63 using liveupgrade I get the following upon reboot. The machine never comes up. Just keeps giving the error/warning below. Is there something I am doing wrong? WARNING: /ssm at 0,0/pci at 1c,600000/scsi at 1 (mpt0): Received invalid reply frame address 0x480 WARNING: /ssm at 0,0/pci at 1c,600000/scsi at 1 (mpt0): Received invalid reply frame address 0x480 WARNING: /ssm at 0,0/pci at 1c,600000/scsi at 1 (mpt0): Received invalid reply frame address 0x480 WARNING: /ssm at 0,0/pci at 1c,6...

Hi, I have a LSI Logic sata/sas raid running, is there a way to see the state of the volume, like optimal, degraded or resyncing? I've tried several commands with camcontrol but I cant figure it out. -- Peter Ankerst?l peter@pean.org http://www.pean.org/

...(no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci3: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib3 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem 0xdeff0000-0xdeffffff,0xdefe0000-0xdefeffff irq 28 at device 1.0 on pci4 mpt0: [ITHREAD] mpt0: MPI Version=1.2.15.0 mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE ) mpt0: 1 Active Volume (1 Max) mpt0: 2 Hidden Drive Members (6 Max) ahd0: <...

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's

Hi all, First, I''ll say my intent is not to spam a bunch of lists, but after posting to opensolaris-discuss I had someone communicate with me offline that these lists would possibly be a better place to start. So here we are. For those on all three lists, sorry for the repetition. Second, this message is meant to solicit help in diagnosing the issue described below. Any hints on

...l via three 8-disk RAIDZ2''s. As you can see, we don''t have the server maxed out on drives... In any case, this new server gets between 400 and 600 of these timeout errors an hour: Aug 21 03:10:17 dev-zfs1 scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340f at 8/pci15d9,1 at 0 (mpt0): Aug 21 03:10:17 dev-zfs1 Log info 31126000 received for target 8. Aug 21 03:10:17 dev-zfs1 scsi_status=0, ioc_status=804b, scsi_state=c Aug 21 03:10:17 dev-zfs1 scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340f at 8/pci15d9,1 at 0 (mpt0): Aug 21 03:10:17 dev-zfs1 Log info...

Hello everybody Unfortunately my problem still doesn't have any solution. But I have an interesting observation. The gateway freezes very quickly, if torrent client programs are running on workstations. I assume the cause of the problem consists in many number of TCP/IP connections that torrent client establishes. Any ideas? Maybe I can tune somehow a TCP/IP via kernel, sysctl or pf settings?

...at could that be - a failing LSI card or a mpt driver in 2009.06? After reboot got four disks in FAILED state - zpool clear fixed things with resilvering. Here is how it started (/var/adm/messages) Feb 23 12:39:03 nexus scsi: [ID 365881 kern.info] /pci at 0,0/pci10de,5d at e/pci1000,3150 at 0 (mpt0): Feb 23 12:39:03 nexus Log info 0x31140000 received for target 2. ... Feb 23 12:39:06 nexus scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci10de,5d at e/pci1000,3150 at 0/sd at 2,9 (sd58): Feb 23 12:39:06 nexus Command failed to complete...Device is gone Feb 23 12:39:06 nexus scsi: [I...

...l X25-E or X25-M SSD disks in a Sun X4240 server with the LSI SAS controller - I never could get things to run without errors no matter what. (Tried multiple LSI controllers and multiple SSD disks). Jul 8 09:43:31 merope scsi: [ID 365881 kern.info] /pci at 0,0/pci10de,375 at f/pci1000,3150 at 0 (mpt0): Jul 8 09:43:31 merope Log info 31126000 received for target 15. Jul 8 09:43:31 merope scsi_status=0, ioc_status=804b, scsi_state=c Jul 8 09:43:31 merope scsi: [ID 365881 kern.info] /pci at 0,0/pci10de,375 at f/pci1000,3150 at 0 (mpt0): Jul 8 09:43:31 merope Log info 31126000 received for t...

...up with 24 disk enclosure connected with LSI3801-R. I created two pools. Pool have 24 healthy disks. I disabled LUN persistency on the LSI adapter. When I cold boot the server (power off by pulling all power cables), a warning is shown on the console during boot: .... WARNING: /pci/path/ ... (mpt0): wwn for traget has changed WARNING: /pci/path/ ... (mpt0): wwn for traget has changed ... It seems that the disk take longer then the enclosure service device SES to boot. SAS1068E''s links are 3.0 G, 3.0 G, 3.0 G, 3.0 G, down, down, down, down B___T SASAddress PhyNum Ha...

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

...on''t appear to give firmware information. We have another nearly identical box that isn''t showing these errors which is why I want to compare firmware versions... the boot logs on the "good" server have been rotated out so I can''t find a Firmware number for the mpt0 device in its logs to compare with. Solaris 10 U8 x86. Thanks, Ray

...scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention Aug 11 17:47:48 thumper2 scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0 Aug 11 17:48:34 thumper2 scsi: [ID 243001 kern.warning] WARNING: /pci at 0,0/pci8086,25f9 at 6/pci1000,3140 at 0 (mpt0): Does somebody know what is going on here? I have checked the disks with iostat -En : -bash-3.2# iostat -En ... c4t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: FUJITSU Product: MBA3073RC Revision: 0103 Serial No: Size: 73.54GB <73543163904 bytes> Medi...

According to various posts the LSI SAS3081E-R seems to work well with OpenSolaris. But I''ve got pretty chilled-out from my recent problems with Areca-1680''s. Could anyone please confirm that the LSI SAS3081E-R works well ? Is hotplug supported ? Anything else I should know before buying one of these cards ? Thanks, Arnaud

Hi, I have a Dell T710 with 4 X 10G ethernet interfaces (2 X Dual port Intel 82599 cards). It is running FreeBSD RELENG_8 last updated on July 13. What I see is packet loss (0 - 40%) on IPv6 packets in vlans, when the machine is not the originator of the packets. Let me try to describe a little more. If a neigbouring machine ping6 it, there will be packet loss. If it act as a router for ipv6,

I've now seen this on two different VMs on two different ESXi servers (Xeon based hosts but different hardware otherwise and at different facilities): Everything runs fine for weeks then (seemingly) suddenly/randomly the clock STOPS. In the first case I saw a jump backwards of about 15 minutes (and then a 'freeze' of the clock). The second time just 'time standing

Greetings, In looking for inexpensive JBOD and/or RAID solutions to use with ZFS, I''ve run across the recent "VTrak" SAS/SATA systems from Promise Technologies, specifically their E-class and J-class series: E310f FC-connected RAID: http://www.promise.com/product/product_detail_eng.asp?product_id=175 E310s SAS-connected RAID: