Displaying 2 results from an estimated 2 matches for "mode5".
Did you mean:
mode
2012 Sep 06
2
[Advice] CentOS6 + KVM + bonding + bridging
...hen the KVM
bridge interface is attached to the bonded interface.
Initially I tried to use the balance-alb mode (mode6), but had little
luck (receiving traffic on the bond appeared to be non-functional from
the perspective of a VM). After some reading [0] [1] - I switched the
mode to balance-tlb (mode5) and hosts are now reachable.
See bottom of [0] for a note on "known ARP problem for bridge on a
bonded interface".
I'd prefer mode5 or 6 since it would balance between my slave
interfaces and need not worry about 802.3ad support (mode4) on the
switch this host will be connected to....
2003 Jun 18
3
ext3 2.4.21 htree tests
...ct=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0
CurCHS=4047/16/255, CurSects=-217054981, LBA=yes, LBAsects=160086528
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2 mode3 mode4 *mode5 mode6
[ct_sys@installed TEST]# hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 9964/255/63, sec...