Displaying 15 results from an estimated 15 matches for "misdn_init".
Did you mean:
miscq_init
2008 Nov 03
0
loading misdn.conf strange error regarding out of range
Hello all!
I just noticed, that since installing the latest SVN branch (152803), I
receive the following error, when loading/reloading the misdn.conf file
misdn reload
[...]
[Nov 3 16:20:37] WARNING[5267]: misdn_config.c:938 _build_general_config:
misdn.conf: "misdn_init=/etc/misdn-init.conf" (section: general) invalid or
out of range.
Please edit your misdn.conf and then do a "misdn reload".
The line in /etc/asterisk/misdn.conf is:
misdn_init=/etc/misdn-init.conf
that's EXACTLY copied from the sample and that's EXACTLY where my
misdn...
2009 Sep 01
0
mISDN NT mode config setting
...rt>
</card>
<card type="hfcpci" dtmf="yes" crystalclock="yes">
<port mode="nt" link="ptp">1</port>
</card>
</mISDNconf>
--
etc/asterisk/misdn.conf
;Tried with both config's no change
misdn_init=/etc/misdn-init.conf
;misdn_init=/etc/mISDN.conf
[trunks]
ports=1,2
context=from-trunk
msns=*
[NTports]
context=from-internal
ports=3,4
msns=*
-------------------------------------------------------
I am using Elastix 1.5 not updated
Any tips?
Where can I find documentation?
Thank you!
HB
2006 Dec 28
1
mIDN question
...oes not wait for further digits. I am using an midsn NT
port that feeds into following dialplan context:
[intern]
exten => _X.,1,Macro(dial)
How is this done properly with misdn?
Thanks,
Arik
PS: I am using the following options in misdn.conf (basically they are
the defaults):
[general]
misdn_init=/etc/misdn-init.conf
debug=0
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=misdn
language=de
musicclass=default
senddtmf=yes
far_alerting=no
allowed_bearers...
2007 Jun 19
1
problem with mISDN
...=> 102,2,Hangup
include => outgoing
[outgoing]
exten =>_9XXXXXXXX,1,Dial(mISDN/1/${EXTEN},45,tTwW)
exten =>_9XXXXXXXX,2,Hangup()
exten =>_9XXXXXXXX,102,Hangup()
[default]
exten => s,1,Answer()
exten => s,2,Wait(1)
exten => s,3,Dial(SIP/101,30,Ttm)
misdn.conf:
[general]
misdn_init=/etc/misdn-init.conf
debug=0
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=misdn
language=es
musicclass=default
senddtmf=yes
far_alerting=no
allowed_bearers...
2006 Jun 29
1
beronet BNS40 led blinking: not working or not connected?
Hi,
I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything
seems ok, asterisk gives no error (nothing inside logs) but the 4 led on
the back of the card (which is NOT connected to an ISDN line) are red
and flashing....what does it mean? Is it not properly working or it
means the card is not connected to any ISDN line? The card handbook says
the card has red led but not their
2007 Jan 14
1
Problems with mISDN TE line
...works fine, and SIP <-> mISDN (NT) calls has
no problems.
All comment lines has been removed to keep mail size reasonable.
/etc/misdn-init.conf:
card=1,0x4,dtmf
te_ptmp=1,2
nt_ptmp=3,4
option=1,master_clock
poll=128
dsp_poll=128
dsp_options=0
dtmfthreshold=100
debug=0
misdn.conf:
[general]
misdn_init=/etc/misdn-init.conf
debug=1
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
bridging=yes
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=default
language=en
musicclass=default
senddtmf=yes
far_alerting=no
allowed_beare...
2009 Sep 08
0
Intermittent metallic voice SIP->ISDN ISDN<-SIP
...jitter buffer working):
jbenable = yes
jbforce = yes
jbmaxsize = 200
jbresyncthreshold = 1000
jbimpl = adaptive
jblog = yes
This is the relevant part of the misdn-init.conf
card=1,hfcpci
te_ptp=1,2
poll=128
dsp_poll=128
dsp_options=0
dtmfthreshold=100
debug=0
And this is the misdn.conf
[general]
misdn_init=/etc/misdn-init.conf
debug=0
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
ntkeepcalls=no
bridging=no
l1watcher_timeout=0
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=misdn
language=en
musicclass=default
senddtmf=...
2007 Jun 13
2
mISDN problem
Hello everybody.
I am trying to configure an Asterisk on Debian with the Billion ISDN card. I
am using mISDN.
But when I call on the CLI apears this:
-- Executing Dial("SIP/101-081805b8", "mISDN/1/943833473|45|tTwW") in new
stack
-- Called 1/943833473
P[ 1] empty_chan_in_stack: cannot empty channel 255
P[ 1] --> we have already send Release_complete
== Everyone is
2007 Dec 15
0
OpenVox B800P and asterisk 1.4/ mISDN-1_1_7
...********* SOFTWARE
mISDN-1_1_7
mISDNuser-1_1_7
Asterisk-1.4.15
******************** SOFTWARE
misdn is correctly loaded by misdn-inist start
Here there is the misdn.conf (copied from an existing and working
installation with Asterisk 1.2.x and one BN8S0)
******************** MISDN.CONF
[general]
misdn_init=/etc/misdn-init.conf
debug=0
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
jitterbuffer=4000
jitterbuffer_upper_threshold=0
context=misdn
language=en
musicclass=maracaibo
senddtmf=yes
far_alerting=no
allowed_bearers=all
nat...
2009 Jan 05
1
B410p, Ast1.4, France Télecom Numeris Double T0 problem
Hi.
When I call my RNIS numbers (with a mobile phone for example), I can
see 2 incoming calls on the IPBX, which should not happend.
I'm not sure if it's a problem with the telco France Telecom and their
ISDN setup, or if it's a problem
with the MISDN driver on the IPBX itself.
I'm stuck ...
Any advices for troubleshooting that?
Someone provide working configuration files
2009 Jul 20
0
No subject
I'm wondering if hdlc can be the culprit (not sure what it is and what it does). Should I set hdlc to yes in misdn.conf (I'm asking before testing because this is a production system)?
misdn.conf:
[general]
misdn_init=/etc/misdn-init.conf
debug=0
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
ntkeepcalls=no
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=misdn
language=us
musicclass=default
senddtmf=yes
far_alerting=no
a...
2009 Nov 05
2
faxes received on mISDN
Hi,
My initial setup for receiving faxes worked as follows:
fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine.
Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as
2009 Feb 06
1
set caller id on outgoing calls through BRIISDNlines
You're quite right. We'll need to see your misdn.conf file to check the
settings.
-->> -----Original Message-----
-->> From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-
-->> bounces at lists.digium.com] On Behalf Of Vieri
-->> Sent: 06 February 2009 13:49
-->> To: asterisk-users at lists.digium.com
-->> Subject:
2007 Jul 24
0
mISDN & Asterisk 1.4: HFC-S card not responsive
...i -v. I hope somebody
could give me a hint as to what could be the problem. The system is
freshly installed and both cards are configured identically.
Cheers,
Arik
===== CLI: misdn show config ===== (n.b. port 1=hfcpci; port 2=avmfritz)
*CLI> misdn show config
Misdn General-Config:
-> misdn_init: /etc/misdn-init.conf -> debug: 0
-> tracefile: /var/log/asterisk/misdn.log -> bridging: no
-> stop_tone_after_first_digit: yes -> append_digits2exten: yes
-> dynamic_crypt: no -> crypt_prefix: **
-> crypt_keys: test,muh -> ntdebugflag...
2006 Apr 28
1
mISDN: No DID/extension information returns busy to caller
...mail: ralf@zoo.priv.at FAX: +43/2243/26465/23
-------------- next part --------------
;
; chan_misdn sample config
;
; general section:
;
; for debugging and general setup, things that are not bound to port groups
;
[general]
;
; Sets the Path to the misdn-init.conf (for nt_ptp mode checking)
;
misdn_init=/etc/misdn-init.conf
; set debugging flag:
; 0 - No Debug
; 1 - mISDN Messages and * - Messages, and * - State changes
; 2 - Messages + Message specific Informations (e.g. bearer capability)
; 3 - very Verbose, the above + lots of Driver specific infos
; 4 - even more Verbose than 3
;
;...