search for: lpt0

...h is UPSilon 2000? [UPSilon 2000] or [UPSilon]? Another thing is with serial port devices. In the example you are giving a name for serial port ttyS1 or something similar (for Linux) and as you mentioned for FreeBSD we shall use cuaaN device. Well FreeBSD# ls acd0 ctty lpt0 stderr ttyv6 acd0t01 cuad0 ??? lpt0.ctl stdin ttyv7 acpi cuad0.init mdctl stdout ttyv8 ad0 cuad0.lock mem sysmouse ttyv9 ad0s1 cuad1??? net ttyd0 ttyv...

...it works ok, but I have this problem where everytime I print anything, a additional blank page comes out of the printer at the end of what was just printed. It's an old HP Laserjet 4 connected to the parallel port of the samba server. /etc/printcap lp|HP4|HP Laserjet 4:\ :sh:lp=/dev/lpt0:sd=/var/spool/output:lf=/var/log/lpd-errs: smb.conf [global] printing = bsd load printers = yes disable spoolss = yes [printers] path = /tmp printable = yes public = yes writable = no use client driver = no Any ideas.... Thanks, Craig

...Things I've setup: - using the default lpd.conf and lpd.perms files. - not running passwords or custom freebsd users on samba. Strictly guest access by user nobody. - set up mode 1777 on the samba print dir - Ran checkpc -f -V. No problems. Had an old problem of not being able to access /dev/lpt0 but I fixed the access privilages (still wierd that we have to do that, the freebsd installed lpr didn't require that, why does lprng require changing the port's access rights?) - I can print multiple copies from the FreeBSD box if I run lpr -#N, up to the 20 limit I specified below. I...

...sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default IPv6 packet filtering initialized, default to accept, logging limited to 1...

...t says "access denied, unable to connect", yet I can browse to the printer fine. I hope someone can offer advice... I'm running OpenBSD 3.2. My /etc/printcap file is as follows: #raw printer raw|raw printer for Windows clients :rw :rp=raw :sh :lp=/dev/lpt0 :sd=/var/spool/samba I can print to the printer fine from UNIX, doing a 'cat /etc/hosts > /dev/lpt0' as a test, so the printer is working. My smb.conf file has the following entry: [printers] comment = All Printers path = /var/spool/samba browseable = yes # Set publ...

...ol/samba browseable = no guest ok = no writeable = no printable = yes printing = bsd [lp] printable = yes browseable = yes print command = lpr -s -P %p %s; rm %s path = /tmp I have configured lpd with the lines in /etc/printcap as lp| Samsung Laser ML-4500:\ :lp=/dev/lpt0:sd=/var/spool/output/lpd:\ :if=/var/log/lpd-errs:sh:mx#0: When the clients print to the printer via samba, the data does get to lpd but checking the logs it spurts out -------------------------- Feb 15 19:30:51 print lpd[221]: lp: unable to open dfA011print.domain.com('f' line)...

After compiling the kernel 4.9RC1 dmesg gives the following error lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed1: <Realtek Plug & Play Ethernet Card> at port 0x220-0x23f irq 5 on isa0 ed1: address 52:54:40:28:83:9a, type NE2000 (16 bit) ad0: 4112MB <WDC AC24300L> [8912/15/63] at ata0-master WDMA2 Mounting root from ufs:/dev/ad0s1a...

...print command = /usr/bin/lpr -P%p -r %s [printer] # use client driver = yes path = /var/spool/lpd/spit printable = yes printer name = lp read only = yes guest ok = yes printcap: dj932c|color|HP DeskJet 932c:\ :sh:mx#0:\ :lp=/dev/lpt0:sd=/var/spool/lpd/spit:\ :if=/usr/local/libexec/magicfilter/dj550c-filter:\ :lf=/var/log/lpd-errors:

...x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata0-master UDMA133 acd0: DVD-ROM <DV-516E> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s1a uscanner0: EPSON EPSON Scanner, rev 1.10/1.00,...

...q 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default DUMMYNET initialized (011031) ad0: 8063MB <Maxtor 90845D4> [16383/16/63] at ata0-master UD...

...nt that I must do with my printcap for a samba-shared printer vs local, but looking through the archives, can't find anything other then "use samba", so I ask here. My current entry is: deskjet:ps:PS:S:lp:HP DeskJet Printer:\ :sh:sd=/var/spool/lpd/deskjet:\ :lp=/dev/lpt0:\ :if=/usr/local/libexec/ifhp:\ :lf=/var/log/log.printer: The if filter is the /usr/share/examples/hpif file, for piping postscript through ghostscript. On the Windoze side, I have the HP 560c drivers loaded, and a friend mentioned something about just wanted to pass it through...

If you start to experience problems with ata devices, please direct your report this way. Thanks -lq

...pc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA...

...l/sbin/lpc -U%U@%M hold %p %j lpresume command = /usr/local/sbin/lpc -U%U@%M release %p %j queuepause command = /usr/local/sbin/lpc -U%U@%M -P%p stop queueresume command = /usr/local/sbin/lpc -U%U@%M -P%p start /etc/printcap ------------- # Printcap file # VERSION=3.6.22 lp|amigita :lp=/dev/lpt0 :sd=/var/spool/lpd/%P :ifhp=model=hp2100,status@ :filter=/usr/local/libexec/filters/ifhp __________________________________________________ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/

...10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled ad0: 38166MB <WDC WD400JB-00ENA0> [77545/16/63] at ata0-master UDMA100 acd0: CDROM &lt...

...x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 SMP: AP CPU #1 Launched! ad0: 9671MB <WDC AC310100B> [19650/16/63] at ata0-master UDMA33 ad1: 39082MB <Maxtor 54...

...sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 DUMMYNET initialized (011031) IP...

...robed irqs 0 sio3 at port 0x2e8-0x2ef irq 9 flags 0x20000 on isa0 sio3: type ST16650A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ahc2: PCI error Interrupt at seqaddr = 0x2 ahc2: Signaled a Target Abort APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IPsec: Initialized Security Association Processi...

...ype 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: IEEE1284 device found Probing for PnP devices on ppbus0: lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% ad0: 95396MB <WDC WD1000BB-00CAA0> [193821/16/63] at ata0-master UDMA100 ad1: 95396MB <WDC WD1000BB-00CAA0> [193821/16/63]...

...sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: cannot reserve interrupt, failed. lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7f...