search for: jlynch

...nsecure=very qualify=yes type=user context=from-pstn Then I went to incoming routes and set it up for any did, any cid, but the telasip connection is taking a different route. Here are the log entries for both. Telasip: May 2 11:11:55 DEBUG[2670] chan_sip.c: Checking SIP call limits for device jlynch May 2 11:11:55 DEBUG[2670] chan_sip.c: build_route: Contact hop: < sip:7707190068@4.79.19.59> May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing Set("SIP/jlynch-cf63", "FROM_DID=6782280738") in new stack May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing Answe...

Im using a Linux machine with standard pc hardware with 3 seperate PCI network interfaces to operate as a DiffServ core router using Linux traffic control. The machine is a P4 2.8ghz, 512mb RAM running fedora core 3 with the 2.6.12.3 kernel. All links and network interfaces are full duplex fast ethernet. IP forwarding is enabled in the kernel. All hosts on the network have their time sychronised

...to 48.4687. The combined increase is 31.2 kbit which is very small. there are some packets queued for a short period and some dropped which clears the queue. The maximum number of packets dropped was 20 per second. But the delay goes up to 30ms. check out the graphs at http://frink.nuigalway.ie/~jlynch/queue/ I cant seem to explain this. Even if the queue was full all the time and each packet was of maximum size, the delay imposed by queueing should be a maximum of 10 * 1500 * 8 /100,000,000 which equals 1ms. How can so much delay be added by such a small increase in the throughput coming fro...

Im experimenting with using a Linux machine with 3 interfaces to operate as a core router. All links and network interfaces are 100mbit. Below is a ascii diagram of the network. (network A) edge router ------>core router---->edge router (network C) ^ | | edge router (network B) I have tried two