Displaying 20 results from an estimated 27 matches for "hde1".
Did you mean:
hda1
2006 Jul 31
1
Issues with cifs mounts following Samba upgrade to 3.0.23a
...shares for my Ubuntu 6.06 installation on my Acer 1682WLMI
laptop. The cifs module on Ubuntu reports as version 1.39.
The symptoms are that I can list the files on the cifs mount, but cannot
access them. Here's an example of the problem from my laptop:
$ sudo mount -t cifs //192.168.123.2/hde1 /mnt/hde1 -o /
username=[myuser],domain=[mydomain],uid=[myuser],gid=[mygroup]
Password:
$ file /mnt/hde1/test.mp3 /mnt/hde1/test.mp3: ERROR: cannot read
`/mnt/hde1/test.mp3' (Permission denied)
$ ls -l /mnt/hde1/test.mp3
-rwxrwSrwt 1 [myuser] [mygroup] 5019629 2006-07-31 11:12 /mnt/hde1/test.m...
2011 May 10
3
Drive recovery?
I have a CentOS 5.6 system (recently installed) that, for some
reason, has decided to mangle one of its drives, specifically /dev/hde1
... No errors anywhere, just rebooted the machine over the weekend and
it's gone. Up till the reboot, the drive was fine, I was writing to it
without a problem.
fdisk tells me:
----------
# fdisk -l /dev/hde
Disk /dev/hde: 160.0 GB, 160041885696 bytes
240 heads, 63 sectors/track, 2...
2006 Jun 10
1
PXELINUX with Kernel 2.6.15.4: VFS: Cannot open root device "hde1" or unknown-block(0, 0)
...end a correct \"root=\" boot option
\n");
panic("VFS: Unable to mount root fs on %s", b);
}
panic("VFS: Unable to mount root fs on %s", __bdevname
(ROOT_DEV, b));
...
This looks as:
"VFS: Cannot open root device "hde1" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncinc: VFS: Unable to mount root fs on
unknown-block(0,0)"
I also tried to set the root-dev with:
"echo 0x3301 > /proc/sys/kernel/real-root-dev" in "linuxrc"...
2006 Jun 11
2
Centos 4.3 & drbd
...2.6.9-34.EL to match my
kernel.
The problem I have is that on 1 machine drbd works fine, but when I start
drbd on the other I get an error:
Starting DRBD resources: [ d0 ioctl(,SET_DISK_CONFIG,) failed: Invalid
argument
Lower device is already mounted.
cmd /sbin/drbdsetup /dev/drbd0 disk /dev/hde1 internal -1 failed!
It is not mounted as far as I can tell - df -a only shows /dev/hda and
fstab has no entry for /dev/hde1.
I have also tried deleting the partion with parted and recreating it. I
have also tried using just /dev/hde.
The /etc/drbd.conf is:
resource drbd0 {
protocol C;
on...
2006 Jun 04
0
Kernel panic on change from 2.4.x to 2.6.x
Hi,
in short:
- EPIA MII6000E motherboard with CF-Card
- Booting from network works with Linux Kernel 2.4.25
- Change to 2.6.15.4 doesn't work -- kernel panics:
VFS: Cannot open root device "hde1" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncinc: VFS: Unable to mount root fs on
unknown-block(0,0)
in Detail:
- "syslinux"-Environment was created with syslinux-2.11.
My old file in "/tftpboot/pxelinux.cfg"...
2005 Nov 17
1
Ext3 bad magic after upgrage FC1 to FC4
Dear All,
I have server with a 160G disk with one partition /dev/hde1. The PC had FC1
and everything was working fine. I decided to do an upgrade to FC4. Now I
can no longer mount that partition. I don't think anything happened to the
file system, but changes in kernel and modules due to the upgrade is now
making it inaccessible.
I tried:
mk2fs -n /dev/...
2003 Apr 28
4
Problem after system hang and reboot
Hello,
a system here stopped because it had a hardware problem. We rebooted it and
have now the following problem:
The data disk /dev/hde1 is formatted as ext3. Obviously one of the inodes is
bad and we get a lot of lines:
Truncating prphaned inode 8863987 (uid=0, gid=0, mode=0100644, size=742)
when running fsck.
These lines have always the same values (inode, mode, ... are equal) and ar
enow showen for about 4 hours. (Yes, always...
2006 Apr 15
3
Dom0 searching for NFS root
...ge on it.
And then I installed same version of Xen into our server with Debian
Sarge and Kernel 2.4. Booting dom0 is not success , xen always trying
look dor NFS root and then request for floopy , anybody experience
with this syndrome ?
In this server I use hde as the harddisk and boot partition is hde1
and root partition at hde10 , is this the problem for Xen ?
Thanks
--
Sugeng Widodo
blog : http://elangmaya.lensa.or.id/
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
2007 Oct 17
2
SMART Prefailure Attribute messages
Hello,
My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I
noticed on the log that suddenly we are getting messages such as :
Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure
Attribute: 8 Seek_Time_Performance changed from 247 to 246
Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefa...
2005 Jul 25
2
[Fwd: e2fsck Segmentation Fault]
...have attached the results of dumpe2fs, but the mailing list complained).
Thanks for any help; let me know any more information I can provide
(I am running debian unstable with a new (2.6.11-ac) kernel (although it
segfaulted on an older kernel too))
e2fsck output:
e2fsck 1.38 (30-Jun-2005)
/dev/hde1 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Root inode is not a directory. Clear? yes
Pass 2: Checking directory structure
Entry '..' in ??? (1785857) has deleted/unused inode 12. Clear? yes
Missing '..' in directory inode 2162689...
2005 Jun 12
7
help with "error extent to vbd failed: ... error 8"
Good morning everybody,
I get a:
Error: Adding extent to vbd failed: device (vbd (uname file:/xen/slackware-linux-10/linu.img) (dev hda1) (mode w)), error 8
What is "error 8"? Where are those error-codes listed?
My linux.conf:
kernel="/xen/slackware-linux-10/vmlinuz-install" # <- the one from Xen
memory=64
name="Linux" # <- is it right that this cannot have
2009 Feb 04
1
rsync differences between Fedora/Ubuntu?
...ying to RE-mount /dev/sdb3 on to /mnt/newroot,
system replies that the partition is busy and mounted to /
This is the script on my Fedora system. I do these steps (modified) on
the Ubuntu system...
> #!/bin/bash
> echo Mounting and backing up the boot area
> echo x
> mount /dev/hde1 /mnt/newboot
> rsync -aHvx --delete /boot/ /mnt/newboot
> umount /dev/hde1
> echo Mounting and backing up the root area
> echo x
> mount /dev/hde3 /mnt/newroot
> cd
> rsync -aHvx --delete // /mnt/newroot
> umount /dev/hde3
2005 Mar 14
1
Fwd: [Cooker] Re: Configure Xen in Mandrake 10.2 cooker
...39;t know if this is the right place to post, but I can''t find any
> > info about my problem on the net.
>
> Yes, this is the right place.
>
> > title Xen2610
> > kernel /boot/xen.gz dom0_mem=131072 console=vga
> > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0
>
> Looks fine.
>
> > But Xen kernel doesn''t start. Every time I try to boot I get this error
> > (I take a screenshot of my monitor with a digital camera, because my
> > boot.log doesn''t record anything when I boot with Xen kernel):
>...
2007 Apr 11
2
Unable to figure out extlinux
...but I'm not sure what. Another thing I tried was
to copy the mbr.img to the disk, but that didn't help. Some details
hde: SanDisk SDCFB-512, CFA DISK drive
ide2 at 0x3100-0x3107,0x310e on irq 19
hde: max request size: 128KiB
hde: 1000944 sectors (512 MB) w/1KiB Cache, CHS=993/16/63
hde: hde1
[root at tyr Murano]# cat extlinux.conf
default Murano
prompt 1
timeout 40
label Murano
kernel /vmlinux
append init=/linuxrc root=/dev/hda1
Any help would be appreciated. Thanks.
2005 Aug 03
1
host controller halted... scarry error
...hat
useually mounts on /var !) and pretty much nothing works without /var.
The error message mount gave was something like "Unable to mount /dev/hde2: invalid
argument".
The files I was copying are located on /dev/md0 (raid 0 over 4 disks) and that still
worked fine, / is mounted on /dev/hde1 and that also worked as expected.
I removed /var from /etc/fstab and restored a backup of /var to the dir /var and
then I could boot normally again.
Trying to save what was on /dev/hdde2 I ran a e2fsck -p /dev/hde2 and that corrected
a ton of errors (deleted a lot of data), I then mounted /dev/hd...
2004 Sep 24
1
Do software raids don't dance Samba?
...evl5)
to store this and that. I'm using the default raid software package that gets shipped
with 9.1 together with a Highpoint RocketRAID 454 ATA card with 8 disks connected
to it:
datagarden:/local # cat /proc/mdstat
Personalities : [raid5]
md0 : active raid5 hdi1[7] hdh1[6] hdg1[5] hdf1[4] hde1[3] hdd1[2] hdc1[1] hdb1[0]
2050671616 blocks level 5, 128k chunk, algorithm 2 [8/8] [UUUUUUUU]
hdi is on the motherboard's build-in controller as I couldn't convice the box that it
should boot from the motherboard, but that's another story. But I hope, that this
isn't causi...
2005 Jan 23
0
ef2sck loops forever with re-allocation
...ass 1: Checking inodes, blocks, and sizes
...............
My last attempt was adding a loopback device in the lvm to create more
space on the lvm device, but that didn't help. Any ideas on what to do
next?
Details of the two disks in lvm:
--- Physical volume ---
PV Name /dev/hde1
VG Name lvm_vg0
PV Size 189.91 GB / not usable 0
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 48618
Free PE 0
Allocated PE 48618
--- Physical volume ---
PV Name /dev/hdb1
V...
2002 Oct 10
1
acard 865 corruption issues
...promise controller, and an
ACARD ATP865 in a PCI slot. I'm running 2.4.19-ac4 with the lvm 1.0.5
patches.
The acard has two drives, hde and hdg attached to it, both ibm120GXPs,
both primary, badblocks shows them as good, smartctl shows them as good.
If, say I create a single partition on /dev/hde1 type linux and format
it ext3, mount it, copy a file into it, unmount it, mount it again and
read the file, it's corrupted. (I tested this by using RAR's CRC test)
If I do a sync or two before unmounting, and then mount it and test it,
it usually has less or no errors.fsck -fvv between moun...
2002 Aug 06
1
Error in rsync protocol data stream (code 12) when doing local rsync.
...tream (code 12) at io.c(151)
rsync: connection unexpectedly closed (76 bytes read so far)
rsync error: error in rsync protocol data stream (code 12) at io.c(151)
#df -m
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/hde2 57151 42377 11871 79% /
/dev/hde1 45 3 40 7% /boot
none 251 0 250 0% /dev/shm
/dev/hdg1 114242 39975 74267 35% /mnt/hdg
/dev/hdf2 57151 41827 12421 78% /mnt/hdf
Clearly there is 12GB of space left on the device....
2004 Feb 18
5
net ads join / kinit /.conf syntax
...2, 10.1.1.53
ldap ssl = no
[homes]
comment = Home Directories
read only = No
browseable = No
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[test]
comment = test
path = /mnt/hde1
valid users = test
read list = test
guest ok = Yes
hosts allow = *
[software]
comment = Software
path = /mnt/hde1/Software
[root@ImediaArchive root]#
[root@ImediaArchive root]#
[root@ImediaArchive root]# cat /etc/krb5.conf
[logging]
default = FILE:/...