Displaying 18 results from an estimated 18 matches for "geom_mirror".
2008 Jun 26
1
gmirror+gjournal: unable to boot after crash
...aster: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 476940MB <SAMSUNG HD501LJ CR100-13> at ata2-master SATA300
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
GEOM_MIRROR[2]: Tasting ad4.
ad4: LSI (v2) check1 failed
magic: GEOM::MIRROR
version: 4
name: gm0
mid: 2403671335
did: 1321347210
all: 2
genid: 0
syncid: 1
priority: 0
slice: 4096
balance: round-robin
mediasize: 500107861504
sectorsize: 512
syncoffset: 0...
2007 Apr 04
1
sun x2100 gmirror problem
...go I found this in the logs:
Apr 1 02:12:05 x2100 kernel: ad6: WARNING - WRITE_DMA48 UDMA ICRC error
(retrying request) LBA=612960533
Apr 1 02:12:05 x2100 kernel: ad6: FAILURE - WRITE_DMA48
status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND> LBA=612960533
Apr 1 02:12:05 x2100 kernel: GEOM_MIRROR: Request failed (error=5).
ad6[WRITE(offset=313835792896, length=4096)]
Apr 1 02:12:05 x2100 kernel: GEOM_MIRROR: Device gm0: provider ad6
disconnected.
Normally it looks like a disk error, but I think our half year old disks
(WD RE2) shouldn't fail after this short time. Of course they have...
2008 Aug 16
0
Panic in nfs/ffs after upgrade from 6.2 to 6.3-RELEASE
...df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: CDROM <CD-ROM 56X/AKH/A80> at ata0-master PIO4
ad4: 35304MB <WDC WD360GD-00FLA2 31.08F31> at ata2-master SATA150
ad8: 190782MB <Seagate ST3200826AS 3.03> at ata4-master SATA150
GEOM_MIRROR: Device gm0 created (id=1495539501).
GEOM_MIRROR: Device gm0: provider ad4s1 detected.
ad10: 190782MB <Seagate ST3200826AS 3.03> at ata5-master SATA150
GEOM_MIRROR: Device gm1 created (id=1615731132).
GEOM_MIRROR: Device gm1: provider ad8s1 detected.
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Devi...
2006 Apr 05
1
GEOM_RAID3: Device datos is broken, too few valid components
...os: provider ad5s2 detected.
GEOM_RAID3: Device datos: provider ad6s2 detected.
GEOM_RAID3: Component ad6s2 (device datos) broken, skipping.
GEOM_RAID3: Component ad4s2 (device datos) broken, skipping.
GEOM_RAID3: Device datos is broken, too few valid components.
GEOM_RAID3: Device datos destroyed.
GEOM_MIRROR: Device home created (id=1272328468).
GEOM_MIRROR: Device home: provider ad0s4d detected.
GEOM_MIRROR: Device local created (id=3856788567).
GEOM_MIRROR: Device local: provider ad0s4e detected.
Root mount waiting for: GMIRROR GMIRROR
Root mount waiting for: GMIRROR GMIRROR
Root mount waiting for: G...
2006 Apr 12
7
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
....10/3.00, addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33
ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150
ad6: 286168MB <Seagate ST3300622AS 3.AAE> at ata3-master SATA150
GEOM_MIRROR: Device gm0s1 created (id=3185843744).
GEOM_MIRROR: Device gm0s1: provider ad4s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 activated.
GEOM_MIRROR: Device gm0s1: provider ad4s1 activated.
GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 l...
2009 Apr 19
0
crash on 7.2-RC1 when inserting an empty DVD: supervisor write, page not present
...0
acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
rabe@daemon:~$ kldstat
Id Refs Address Size Name
1 34 0xc0400000 9f73a4 kernel
2 1 0xc0df8000 111b8 geom_eli.ko
3 2 0xc0e0a000 25ff8 crypto.ko
4 2 0xc0e30000 ab40 zlib.ko
5 1 0xc0e3b000 164e8 geom_mirror.ko
6 1 0xc0e52000 78bc geom_stripe.ko
7 1 0xc0e5a000 1ae38 snd_hda.ko
8 2 0xc0e75000 4a64c sound.ko
9 1 0xc0ec0000 4d84 ichsmb.ko
10 2 0xc0ec5000 1be0 smbus.ko
11 1 0xc0ec7000 4dc0 atapicam.ko
12 1 0xc0ecc000 6a45c acpi.ko
13 1 0xc7277000 7000...
2008 Sep 03
1
bugged sysinstall, bsdlabel, zfs, gmirror - recept for disaster :)
...foo
Then by using "M" key I removed mount points and saved changes with "W".
At this point everything seems ok. So I've added gmirror to loader.conf
and run "gmirror label -n -v -b round-robin boot ad0s1a ad2s1a ad3s1a".
Still ok until now. Next step - kldload geom_mirror. Here's disaster!
System became unresponsible and hangs after a while. Reboot didn't help,
just after gmirror module was loaded by kernel, screen was flooded with
messages:
WARNING: Expected rawoffset 0, found 63
andy didn't boot. I've made system start only because an old...
2008 Jul 22
1
unable to use gmirror on supermicro 5015b-mt
...tem/1U/5015/SYS-5015B-MT.cfm
core 2 Q6600 CPU
8Gb 667 RAM
Boxes were memtested from Fri-Mon okay. 6.3-RELEASE (amd64) installs fine.
Build cycle okay. Running (no load) for a week or so.
However, when I try to configure gmirror they hang on boot.
After some fiddling it appears issuing
#kldload geom_mirror
hangs the boxes very hard. Ping response stops (after 3), no CAD response,
CDROM draw doesn't open!
This may well be a foolish thing to do but another (different) amd64 box
doesn't hang. I don't believe this to be amd64 specific, I suspect that
there's something strange about th...
2006 Apr 12
1
powerd not behaving with an Asus A8V-MX and Athlon 64 X2 3800+
....10/3.00, addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33
ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150
ad6: 286168MB <Seagate ST3300622AS 3.AAE> at ata3-master SATA150
GEOM_MIRROR: Device gm0s1 created (id=3185843744).
GEOM_MIRROR: Device gm0s1: provider ad4s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 activated.
GEOM_MIRROR: Device gm0s1: provider ad4s1 activated.
GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 l...
2008 Sep 30
5
GELI partition mount on boot fails after 7.0 -> 7.1-PRERELEASE upgrade
I was using a GELI partition for /usr/home on 7.0, so it attaches and mounts
on boot. The problem is it stopped working after the system was upgraded to
RELENG_7/7.1-PRERELEASE. Here's how it goes:
I have the following /etc/fstab:
/dev/ad0s1b none swap sw 0 0
/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1d
2008 Jun 03
0
ALTQ and cpufreq(4)
...# Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
options GEOM_MIRROR
options GEOM_LABEL
options GEOM_ELI
device crypto
device cryptodev
device hifn
device tun
device tap
device pf
device pflog
options COMPAT_LINUX
options ALTQ
options ALTQ_CBQ # Class Ba...
2010 Jul 19
1
packet loss on ixgbe using vlans and ipv6
Hi,
I have a Dell T710 with 4 X 10G ethernet interfaces (2 X Dual port Intel
82599 cards). It is running FreeBSD RELENG_8 last updated on July 13.
What I see is packet loss (0 - 40%) on IPv6 packets in vlans, when the
machine is not the originator of the packets.
Let me try to describe a little more. If a neigbouring machine ping6 it,
there will be packet loss. If it act as a router for ipv6,
2013 Jul 01
3
Problems booting into ZFS on recent stable/9
I had a sparc64 (Netra X1) running a stable/9 from late March 2013. Actually, the kernel may've been a bit newer than that as I was working with folks to diagnose and repair some Netra-X1 specific issues. But, ZFS worked fine. I have two pools, zroot as a RAID1 (using equally sized partitions at the front of two large disks), and a zdata that is a large pool of the remaining space of both
2006 Sep 06
2
Getting GELI Keys from Floppy
Hello,
i want to encrypt my HDD's with GELI (not the root-fs, though). I want
to do the encryption without password, just with a key. The key should
be stored in a floppy disk, and the read should be read automatically
on boot, from the floppy.
There is a problem here, because GELI initializes _before_ mounting
the disks from /etc/fstab (for obvious reasons, of course). So GELI is
not able
2013 Jun 13
1
zpool labelclear destroys GPT data
When i use zpool labelclear, it wipes the whole disk including gpt data.
So the whole disk is empty and i need to create the gpt partitions again.
Is this supposed to work like this?
The man page suggests that it only wipes the ZFS metadata.
zpool labelclear [-f] device
Removes ZFS label information from the specified device. The
device
must not be part of an active pool
2008 Jul 15
5
Multi-machine mirroring choices
With the introduction of zfs to FreeBSD 7.0, a door has opened for more
mirroring options so I would like to get some opinions on what direction
I should take for the following scenario.
Basically I have 2 machines that are "clones" of each other (master and
slave) wherein one will be serving up samba shares. Each server has one
disk to hold the OS (not mirrored) and then 3 disks, each
2006 Nov 17
1
gjournal on 6.x wont build
Hi all,
I was intending on trying out gjournal on a new disk i've added in my
desktop. I had a look to see what the most recent patch provided by
Pawel and found
http://people.freebsd.org/~pjd/patches/gjournal6_20061024.patch
I created the directories as per Pawel's original post
(http://lists.freebsd.org/pipermail/freebsd-fs/2006-June/001962.html)
and the patch succeeded with no failed
2008 Sep 21
3
UNEXPECTED SOFT UPDATE INCONSISTENCY; RUN fsck MANUALLY
Sep 21 08:57:54 belle fsck: /dev/ad4s1d: 1 DUP I=190
Sep 21 08:57:54 belle fsck: /dev/ad4s1d: UNEXPECTED SOFT UPDATE INCONSISTENCY; RUN fsck MANUALLY.
Ok, so I ran fsck manually (even with -y), but yet it refuses to clear/fix
whatever to the questions posed as fsck runs. What does this all mean?
Thanks,
-Clint
--
This message has been scanned for viruses and
dangerous content by MailScanner,